Message-ID: <Z7OMv-7UBVtKaEFb@lore-desk>
Date: Mon, 17 Feb 2025 20:23:43 +0100
From: Lorenzo Bianconi <lorenzo@...nel.org>
To: Simon Horman <horms@...nel.org>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Felix Fietkau <nbd@....name>, Sean Wang <sean.wang@...iatek.com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	"Chester A. Unal" <chester.a.unal@...nc9.com>,
	Daniel Golle <daniel@...rotopia.org>,
	DENG Qingfang <dqfext@...il.com>, Andrew Lunn <andrew@...n.ch>,
	Vladimir Oltean <olteanv@...il.com>, netdev@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
	upstream@...oha.com
Subject: Re: [PATCH net-next v4 13/16] net: airoha: Introduce Airoha NPU
 support

> On Thu, Feb 13, 2025 at 04:34:32PM +0100, Lorenzo Bianconi wrote:
> > Packet Processor Engine (PPE) module available on EN7581 SoC populates
> > the PPE table with 5-tuples flower rules learned from traffic forwarded
> > between the GDM ports connected to the Packet Switch Engine (PSE) module.
> > The airoha_eth driver can enable hw acceleration of learned 5-tuples
> > rules if the user configure them in netfilter flowtable (netfilter
> > flowtable support will be added with subsequent patches).
> > airoha_eth driver configures and collects data from the PPE module via a
> > Network Processor Unit (NPU) RISC-V module available on the EN7581 SoC.
> > Introduce basic support for Airoha NPU moudle.
> 
> nit: module

ack, I will fix it in v6

> 
> > 
> > Signed-off-by: Lorenzo Bianconi <lorenzo@...nel.org>
> 
> ...
> 
> > diff --git a/drivers/net/ethernet/airoha/airoha_npu.c b/drivers/net/ethernet/airoha/airoha_npu.c
> 
> ...
> 
> > +static int airoha_npu_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct reserved_mem *rmem;
> > +	struct airoha_npu *npu;
> > +	struct device_node *np;
> > +	void __iomem *base;
> > +	int i, irq, err;
> > +
> > +	base = devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(base))
> > +		return PTR_ERR(base);
> > +
> > +	npu = devm_kzalloc(dev, sizeof(*npu), GFP_KERNEL);
> > +	if (!npu)
> > +		return -ENOMEM;
> > +
> > +	npu->dev = dev;
> > +	npu->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
> > +	if (IS_ERR(npu->regmap))
> > +		return PTR_ERR(npu->regmap);
> > +
> > +	np = of_parse_phandle(dev->of_node, "memory-region", 0);
> > +	if (!np)
> > +		return -ENODEV;
> > +
> > +	rmem = of_reserved_mem_lookup(np);
> > +	of_node_put(np);
> > +
> > +	if (!rmem)
> > +		return -ENODEV;
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	if (irq < 0)
> > +		return irq;
> > +
> > +	err = devm_request_irq(dev, irq, airoha_npu_mbox_handler,
> > +			       IRQF_SHARED, "airoha-npu-mbox", npu);
> > +	if (err)
> > +		return err;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(npu->cores); i++) {
> > +		struct airoha_npu_core *core = &npu->cores[i];
> > +
> > +		spin_lock_init(&core->lock);
> > +		core->npu = npu;
> > +
> > +		irq = platform_get_irq(pdev, i + 1);
> > +		if (irq < 0)
> > +			return err;
> 
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..3620f4e771e659de4c91b40575e18d689199fb4c
> > --- /dev/null
> > +++ b/drivers/net/ethernet/airoha/airoha_npu.c
> > @@ -0,0 +1,521 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2025 AIROHA Inc
> > + * Author: Lorenzo Bianconi <lorenzo@...nel.org>
> > + */
> > +
> > +#include <linux/devcoredump.h>
> > +#include <linux/firmware.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/of_net.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_reserved_mem.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "airoha_npu.h"
> > +
> > +#define NPU_EN7581_FIRMWARE_DATA		"airoha/en7581_npu_data.bin"
> > +#define NPU_EN7581_FIRMWARE_RV32		"airoha/en7581_npu_rv32.bin"
> > +#define NPU_EN7581_FIRMWARE_RV32_MAX_SIZE	0x200000
> > +#define NPU_EN7581_FIRMWARE_DATA_MAX_SIZE	0x10000
> > +#define NPU_DUMP_SIZE				512
> > +
> > +#define REG_NPU_LOCAL_SRAM		0x0
> > +
> > +#define NPU_PC_BASE_ADDR		0x305000
> > +#define REG_PC_DBG(_n)			(0x305000 + ((_n) * 0x100))
> > +
> > +#define NPU_CLUSTER_BASE_ADDR		0x306000
> > +
> > +#define REG_CR_BOOT_TRIGGER		(NPU_CLUSTER_BASE_ADDR + 0x000)
> > +#define REG_CR_BOOT_CONFIG		(NPU_CLUSTER_BASE_ADDR + 0x004)
> > +#define REG_CR_BOOT_BASE(_n)		(NPU_CLUSTER_BASE_ADDR + 0x020 + ((_n) << 2))
> > +
> > +#define NPU_MBOX_BASE_ADDR		0x30c000
> > +
> > +#define REG_CR_MBOX_INT_STATUS		(NPU_MBOX_BASE_ADDR + 0x000)
> > +#define MBOX_INT_STATUS_MASK		BIT(8)
> > +
> > +#define REG_CR_MBOX_INT_MASK(_n)	(NPU_MBOX_BASE_ADDR + 0x004 + ((_n) << 2))
> > +#define REG_CR_MBQ0_CTRL(_n)		(NPU_MBOX_BASE_ADDR + 0x030 + ((_n) << 2))
> > +#define REG_CR_MBQ8_CTRL(_n)		(NPU_MBOX_BASE_ADDR + 0x0b0 + ((_n) << 2))
> > +#define REG_CR_NPU_MIB(_n)		(NPU_MBOX_BASE_ADDR + 0x140 + ((_n) << 2))
> > +
> > +#define NPU_TIMER_BASE_ADDR		0x310100
> > +#define REG_WDT_TIMER_CTRL(_n)		(NPU_TIMER_BASE_ADDR + ((_n) * 0x100))
> > +#define WDT_EN_MASK			BIT(25)
> > +#define WDT_INTR_MASK			BIT(21)
> > +
> > +enum {
> > +	NPU_OP_SET = 1,
> > +	NPU_OP_SET_NO_WAIT,
> > +	NPU_OP_GET,
> > +	NPU_OP_GET_NO_WAIT,
> > +};
> > +
> > +enum {
> > +	NPU_FUNC_WIFI,
> > +	NPU_FUNC_TUNNEL,
> > +	NPU_FUNC_NOTIFY,
> > +	NPU_FUNC_DBA,
> > +	NPU_FUNC_TR471,
> > +	NPU_FUNC_PPE,
> > +};
> > +
> > +enum {
> > +	NPU_MBOX_ERROR,
> > +	NPU_MBOX_SUCCESS,
> > +};
> > +
> > +enum {
> > +	PPE_FUNC_SET_WAIT,
> > +	PPE_FUNC_SET_WAIT_HWNAT_INIT,
> > +	PPE_FUNC_SET_WAIT_HWNAT_DEINIT,
> > +	PPE_FUNC_SET_WAIT_API,
> > +};
> > +
> > +enum {
> > +	PPE2_SRAM_SET_ENTRY,
> > +	PPE_SRAM_SET_ENTRY,
> > +	PPE_SRAM_SET_VAL,
> > +	PPE_SRAM_RESET_VAL,
> > +};
> > +
> > +enum {
> > +	QDMA_WAN_ETHER = 1,
> > +	QDMA_WAN_PON_XDSL,
> > +};
> > +
> > +#define MBOX_MSG_FUNC_ID	GENMASK(14, 11)
> > +#define MBOX_MSG_STATIC_BUF	BIT(5)
> > +#define MBOX_MSG_STATUS		GENMASK(4, 2)
> > +#define MBOX_MSG_DONE		BIT(1)
> > +#define MBOX_MSG_WAIT_RSP	BIT(0)
> > +
> > +#define PPE_TYPE_L2B_IPV4	2
> > +#define PPE_TYPE_L2B_IPV4_IPV6	3
> > +
> > +struct ppe_mbox_data {
> > +	u32 func_type;
> > +	u32 func_id;
> > +	union {
> > +		struct {
> > +			u8 cds;
> > +			u8 xpon_hal_api;
> > +			u8 wan_xsi;
> > +			u8 ct_joyme4;
> > +			int ppe_type;
> > +			int wan_mode;
> > +			int wan_sel;
> > +		} init_info;
> > +		struct {
> > +			int func_id;
> > +			u32 size;
> > +			u32 data;
> > +		} set_info;
> > +	};
> > +};
> > +
> > +static int airoha_npu_send_msg(struct airoha_npu *npu, int func_id,
> > +			       void *p, int size)
> > +{
> > +	u16 core = 0; /* FIXME */
> > +	u32 val, offset = core << 4;
> > +	dma_addr_t dma_addr;
> > +	void *addr;
> > +	int ret;
> > +
> > +	addr = kzalloc(size, GFP_ATOMIC | GFP_DMA);
> > +	if (!addr)
> > +		return -ENOMEM;
> > +
> > +	memcpy(addr, p, size);
> > +	dma_addr = dma_map_single(npu->dev, addr, size, DMA_TO_DEVICE);
> > +	ret = dma_mapping_error(npu->dev, dma_addr);
> > +	if (ret)
> > +		goto out;
> > +
> > +	spin_lock_bh(&npu->cores[core].lock);
> > +
> > +	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(0) + offset, dma_addr);
> > +	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(1) + offset, size);
> > +	regmap_read(npu->regmap, REG_CR_MBQ0_CTRL(2) + offset, &val);
> > +	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(2) + offset, val + 1);
> > +	val = FIELD_PREP(MBOX_MSG_FUNC_ID, func_id) | MBOX_MSG_WAIT_RSP;
> > +	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(3) + offset, val);
> > +
> > +	ret = regmap_read_poll_timeout_atomic(npu->regmap,
> > +					      REG_CR_MBQ0_CTRL(3) + offset,
> > +					      val, (val & MBOX_MSG_DONE),
> > +					      100, 100 * MSEC_PER_SEC);
> > +	if (!ret && FIELD_GET(MBOX_MSG_STATUS, val) != NPU_MBOX_SUCCESS)
> > +		ret = -EINVAL;
> > +
> > +	spin_unlock_bh(&npu->cores[core].lock);
> > +
> > +	dma_unmap_single(npu->dev, dma_addr, size, DMA_TO_DEVICE);
> > +out:
> > +	kfree(addr);
> > +
> > +	return ret;
> > +}
> > +
> > +static int airoha_npu_run_firmware(struct device *dev, void __iomem *base,
> > +				   struct reserved_mem *rmem)
> > +{
> > +	const struct firmware *fw;
> > +	void __iomem *addr;
> > +	int ret;
> > +
> > +	ret = request_firmware(&fw, NPU_EN7581_FIRMWARE_RV32, dev);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (fw->size > NPU_EN7581_FIRMWARE_RV32_MAX_SIZE) {
> > +		dev_err(dev, "%s: fw size too overlimit (%zu)\n",
> > +			NPU_EN7581_FIRMWARE_RV32, fw->size);
> > +		ret = -E2BIG;
> > +		goto out;
> > +	}
> > +
> > +	addr = devm_ioremap(dev, rmem->base, rmem->size);
> > +	if (!addr) {
> > +		ret = -ENOMEM;
> > +		goto out;
> > +	}
> > +
> > +	memcpy_toio(addr, fw->data, fw->size);
> > +	release_firmware(fw);
> > +
> > +	ret = request_firmware(&fw, NPU_EN7581_FIRMWARE_DATA, dev);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (fw->size > NPU_EN7581_FIRMWARE_DATA_MAX_SIZE) {
> > +		dev_err(dev, "%s: fw size too overlimit (%zu)\n",
> > +			NPU_EN7581_FIRMWARE_DATA, fw->size);
> > +		ret = -E2BIG;
> > +		goto out;
> > +	}
> > +
> > +	memcpy_toio(base + REG_NPU_LOCAL_SRAM, fw->data, fw->size);
> > +out:
> > +	release_firmware(fw);
> > +
> > +	return ret;
> > +}
> > +
> > +static irqreturn_t airoha_npu_mbox_handler(int irq, void *npu_instance)
> > +{
> > +	struct airoha_npu *npu = npu_instance;
> > +
> > +	/* clear mbox interrupt status */
> > +	regmap_write(npu->regmap, REG_CR_MBOX_INT_STATUS,
> > +		     MBOX_INT_STATUS_MASK);
> > +
> > +	/* acknowledge npu */
> > +	regmap_update_bits(npu->regmap, REG_CR_MBQ8_CTRL(3),
> > +			   MBOX_MSG_STATUS | MBOX_MSG_DONE, MBOX_MSG_DONE);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static void airoha_npu_wdt_work(struct work_struct *work)
> > +{
> > +	struct airoha_npu_core *core;
> > +	struct airoha_npu *npu;
> > +	void *dump;
> > +	u32 val[3];
> > +	int c;
> > +
> > +	core = container_of(work, struct airoha_npu_core, wdt_work);
> > +	npu = core->npu;
> > +
> > +	dump = vzalloc(NPU_DUMP_SIZE);
> > +	if (!dump)
> > +		return;
> > +
> > +	c = core - &npu->cores[0];
> > +	regmap_bulk_read(npu->regmap, REG_PC_DBG(c), val, ARRAY_SIZE(val));
> > +	snprintf(dump, NPU_DUMP_SIZE, "PC: %08x SP: %08x LR: %08x\n",
> > +		 val[0], val[1], val[2]);
> > +
> > +	dev_coredumpv(npu->dev, dump, NPU_DUMP_SIZE, GFP_KERNEL);
> > +}
> > +
> > +static irqreturn_t airoha_npu_wdt_handler(int irq, void *core_instance)
> > +{
> > +	struct airoha_npu_core *core = core_instance;
> > +	struct airoha_npu *npu = core->npu;
> > +	int c = core - &npu->cores[0];
> > +	u32 val;
> > +
> > +	regmap_set_bits(npu->regmap, REG_WDT_TIMER_CTRL(c), WDT_INTR_MASK);
> > +	if (!regmap_read(npu->regmap, REG_WDT_TIMER_CTRL(c), &val) &&
> > +	    FIELD_GET(WDT_EN_MASK, val))
> > +		schedule_work(&core->wdt_work);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int airoha_npu_ppe_init(struct airoha_npu *npu)
> > +{
> > +	struct ppe_mbox_data ppe_data = {
> > +		.func_type = NPU_OP_SET,
> > +		.func_id = PPE_FUNC_SET_WAIT_HWNAT_INIT,
> > +		.init_info = {
> > +			.ppe_type = PPE_TYPE_L2B_IPV4_IPV6,
> > +			.wan_mode = QDMA_WAN_ETHER,
> > +		},
> > +	};
> > +
> > +	return airoha_npu_send_msg(npu, NPU_FUNC_PPE, &ppe_data,
> > +				   sizeof(struct ppe_mbox_data));
> > +}
> > +
> > +int airoha_npu_ppe_deinit(struct airoha_npu *npu)
> > +{
> > +	struct ppe_mbox_data ppe_data = {
> > +		.func_type = NPU_OP_SET,
> > +		.func_id = PPE_FUNC_SET_WAIT_HWNAT_DEINIT,
> > +	};
> > +
> > +	return airoha_npu_send_msg(npu, NPU_FUNC_PPE, &ppe_data,
> > +				   sizeof(struct ppe_mbox_data));
> > +}
> > +EXPORT_SYMBOL_GPL(airoha_npu_ppe_deinit);
> > +
> > +int airoha_npu_ppe_flush_sram_entries(struct airoha_npu *npu,
> > +				      dma_addr_t foe_addr,
> > +				      int sram_num_entries)
> > +{
> > +	struct ppe_mbox_data ppe_data = {
> > +		.func_type = NPU_OP_SET,
> > +		.func_id = PPE_FUNC_SET_WAIT_API,
> > +		.set_info = {
> > +			.func_id = PPE_SRAM_RESET_VAL,
> > +			.data = foe_addr,
> > +			.size = sram_num_entries,
> > +		},
> > +	};
> > +
> > +	return airoha_npu_send_msg(npu, NPU_FUNC_PPE, &ppe_data,
> > +				   sizeof(struct ppe_mbox_data));
> > +}
> > +EXPORT_SYMBOL_GPL(airoha_npu_ppe_flush_sram_entries);
> > +
> > +int airoha_npu_foe_commit_entry(struct airoha_npu *npu, dma_addr_t foe_addr,
> > +				u32 entry_size, u32 hash, bool ppe2)
> > +{
> > +	struct ppe_mbox_data ppe_data = {
> > +		.func_type = NPU_OP_SET,
> > +		.func_id = PPE_FUNC_SET_WAIT_API,
> > +		.set_info = {
> > +			.data = foe_addr,
> > +			.size = entry_size,
> > +		},
> > +	};
> > +	int err;
> > +
> > +	ppe_data.set_info.func_id = ppe2 ? PPE2_SRAM_SET_ENTRY
> > +					 : PPE_SRAM_SET_ENTRY;
> > +
> > +	err = airoha_npu_send_msg(npu, NPU_FUNC_PPE, &ppe_data,
> > +				  sizeof(struct ppe_mbox_data));
> > +	if (err)
> > +		return err;
> > +
> > +	ppe_data.set_info.func_id = PPE_SRAM_SET_VAL;
> > +	ppe_data.set_info.data = hash;
> > +	ppe_data.set_info.size = sizeof(u32);
> > +
> > +	return airoha_npu_send_msg(npu, NPU_FUNC_PPE, &ppe_data,
> > +				   sizeof(struct ppe_mbox_data));
> > +}
> > +EXPORT_SYMBOL_GPL(airoha_npu_foe_commit_entry);
> > +
> > +struct airoha_npu *airoha_npu_get(struct device *dev)
> > +{
> > +	struct platform_device *pdev;
> > +	struct device_node *np;
> > +	struct airoha_npu *npu;
> > +
> > +	np = of_parse_phandle(dev->of_node, "airoha,npu", 0);
> > +	if (!np)
> > +		return ERR_PTR(-ENODEV);
> > +
> > +	pdev = of_find_device_by_node(np);
> > +	of_node_put(np);
> > +
> > +	if (!pdev) {
> > +		dev_err(dev, "cannot find device node %s\n", np->name);
> > +		return ERR_PTR(-ENODEV);
> > +	}
> > +
> > +	if (!try_module_get(THIS_MODULE)) {
> > +		dev_err(dev, "failed to get the device driver module\n");
> > +		npu = ERR_PTR(-ENODEV);
> > +		goto error_pdev_put;
> > +	}
> > +
> > +	npu = platform_get_drvdata(pdev);
> > +	if (!npu) {
> > +		npu = ERR_PTR(-ENODEV);
> > +		goto error_module_put;
> > +	}
> > +
> > +	if (!device_link_add(dev, &pdev->dev, DL_FLAG_AUTOREMOVE_SUPPLIER)) {
> > +		dev_err(&pdev->dev,
> > +			"failed to create device link to consumer %s\n",
> > +			dev_name(dev));
> > +		npu = ERR_PTR(-EINVAL);
> > +		goto error_module_put;
> > +	}
> > +
> > +	return npu;
> > +
> > +error_module_put:
> > +	module_put(THIS_MODULE);
> > +error_pdev_put:
> > +	platform_device_put(pdev);
> > +
> > +	return npu;
> > +}
> > +EXPORT_SYMBOL_GPL(airoha_npu_get);
> > +
> > +void airoha_npu_put(struct airoha_npu *npu)
> > +{
> > +	module_put(THIS_MODULE);
> > +	put_device(npu->dev);
> > +}
> > +EXPORT_SYMBOL_GPL(airoha_npu_put);
> > +
> > +static const struct of_device_id of_airoha_npu_match[] = {
> > +	{ .compatible = "airoha,en7581-npu" },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, of_airoha_npu_match);
> > +
> > +static const struct regmap_config regmap_config = {
> > +	.name			= "npu",
> > +	.reg_bits		= 32,
> > +	.val_bits		= 32,
> > +	.reg_stride		= 4,
> > +	.disable_locking	= true,
> > +};
> 
> Should this return irq rather than err?

are you referring to devm_request_irq()?

https://elixir.bootlin.com/linux/v6.13.2/source/include/linux/interrupt.h#L215
https://elixir.bootlin.com/linux/v6.13.2/source/kernel/irq/devres.c#L52

I guess it returns 0 on success and a negative value in case of error.

Regards,
Lorenzo

> 
> Flagged by Smatch.
> 
> > +
> > +		err = devm_request_irq(dev, irq, airoha_npu_wdt_handler,
> > +				       IRQF_SHARED, "airoha-npu-wdt", core);
> > +		if (err)
> > +			return err;
> > +
> > +		INIT_WORK(&core->wdt_work, airoha_npu_wdt_work);
> > +	}
> > +
> > +	if (dma_set_coherent_mask(dev, 0xbfffffff))
> > +		dev_warn(dev, "failed coherent DMA configuration\n");
> > +
> > +	err = airoha_npu_run_firmware(dev, base, rmem);
> > +	if (err)
> > +		return err;
> > +
> > +	regmap_write(npu->regmap, REG_CR_NPU_MIB(10),
> > +		     rmem->base + NPU_EN7581_FIRMWARE_RV32_MAX_SIZE);
> > +	regmap_write(npu->regmap, REG_CR_NPU_MIB(11), 0x40000); /* SRAM 256K */
> > +	regmap_write(npu->regmap, REG_CR_NPU_MIB(12), 0);
> > +	regmap_write(npu->regmap, REG_CR_NPU_MIB(21), 1);
> > +	msleep(100);
> > +
> > +	/* setting booting address */
> > +	for (i = 0; i < NPU_NUM_CORES; i++)
> > +		regmap_write(npu->regmap, REG_CR_BOOT_BASE(i), rmem->base);
> > +	usleep_range(1000, 2000);
> > +
> > +	/* enable NPU cores */
> > +	/* do not start core3 since it is used for WiFi offloading */
> > +	regmap_write(npu->regmap, REG_CR_BOOT_CONFIG, 0xf7);
> > +	regmap_write(npu->regmap, REG_CR_BOOT_TRIGGER, 0x1);
> > +	msleep(100);
> > +
> > +	err = airoha_npu_ppe_init(npu);
> > +	if (err)
> > +		return err;
> > +
> > +	platform_set_drvdata(pdev, npu);
> > +
> > +	return 0;
> > +}
> 
> ...

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)

Powered by blists - more mailing lists