[<prev] [next>] [day] [month] [year] [list]
Message-ID: <2825a424-eedf-4887-943b-4477fc367ffc@molgen.mpg.de>
Date: Wed, 19 Feb 2025 18:11:10 +0100
From: Paul Menzel <pmenzel@...gen.mpg.de>
To: Andrew Lunn <andrew@...n.ch>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Mathias Nyman <mathias.nyman@...el.com>
Cc: Hayes Wang <hayeswang@...ltek.com>, linux-usb@...r.kernel.org,
netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: XHCI/Realtek 8152: Network interface of USB-C mini dock does not show
up
Dear Linux folks,
On the Intel Kaby Lake laptop Dell XPS 13 9360, I suspended it on one
location and detached the Dell DA300 USB-C “mini dock” there, and at a
different place resumed it from ACPI S3 and plugged in an LMP mini Dock.
As happens sometimes before, the network interface wasn’t detected
(`drivers/net/usb/r8152.c`). Normally re-plugging works, but this time,
and didn’t. Only suspending the system and resuming fixed it. I enabled
USB dynamic debug with
echo 'file drivers/usb/* +p' | sudo tee
/sys/kernel/debug/dynamic_debug/control
after it didn’t work for some time.
Please find the Linux messages attached. It should start from
[30591.582919] PM: suspend entry (deep)
on.
It may be related to the issue I reported last year, analyzed by Mathias
already but I didn’t respond yet [1].
No other devices are attached to the USB-C mini dock.
Kind regards,
Paul
[1]:
https://lore.kernel.org/all/785ddb6f-dca2-466d-c4bb-a6723a51e3e8@linux.intel.com/
"Re: xhci_hcd: `Timeout while waiting for setup device command`,
37 s until Ethernet connection is established"
[2]: https://lmp-adapter.com/product/lmp-usb-c-mini-dock/
View attachment "20250219--dell-xps-13-9360--linux-6.14-rc3+.txt" of type "text/plain" (445952 bytes)
Powered by blists - more mailing lists