| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250221025141.1132944-2-kuba@kernel.org>
Date: Thu, 20 Feb 2025 18:51:41 -0800
From: Jakub Kicinski <kuba@...nel.org>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org,
edumazet@...gle.com,
pabeni@...hat.com,
andrew+netdev@...n.ch,
horms@...nel.org,
dxu@...uu.xyz,
Jakub Kicinski <kuba@...nel.org>,
shuah@...nel.org,
hawk@...nel.org,
petrm@...dia.com,
willemb@...gle.com,
jstancek@...hat.com,
linux-kselftest@...r.kernel.org
Subject: [PATCH net v2 2/2] selftests: drv-net: test XDP, HDS auto and the ioctl path
Test XDP and HDS interaction. While at it add a test for using the IOCTL,
as that turned out to be the real culprit.
Testing bnxt:
# NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
and netdevsim:
# ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Netdevsim needs a sane default for tx/rx ring size.
ethtool 6.11 is needed for the --disable-netlink option.
Signed-off-by: Jakub Kicinski <kuba@...nel.org>
---
Since this is targeting net there is no cfg.rpath(),
I'll follow up once in net-next.
v2:
- add the ioctl tests
- factor out some common logic
CC: shuah@...nel.org
CC: hawk@...nel.org
CC: petrm@...dia.com
CC: willemb@...gle.com
CC: jstancek@...hat.com
CC: linux-kselftest@...r.kernel.org
---
tools/testing/selftests/net/lib/Makefile | 3 +
drivers/net/netdevsim/ethtool.c | 2 +
.../testing/selftests/net/lib/xdp_dummy.bpf.c | 13 ++
tools/testing/selftests/drivers/net/hds.py | 145 +++++++++++++++++-
4 files changed, 160 insertions(+), 3 deletions(-)
create mode 100644 tools/testing/selftests/net/lib/xdp_dummy.bpf.c
diff --git a/tools/testing/selftests/net/lib/Makefile b/tools/testing/selftests/net/lib/Makefile
index bc6b6762baf3..c22623b9a2a5 100644
--- a/tools/testing/selftests/net/lib/Makefile
+++ b/tools/testing/selftests/net/lib/Makefile
@@ -9,7 +9,10 @@ TEST_FILES := ../../../../../Documentation/netlink/specs
TEST_FILES += ../../../../net/ynl
TEST_GEN_FILES += csum
+TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c))
TEST_INCLUDES := $(wildcard py/*.py sh/*.sh)
include ../../lib.mk
+
+include ../bpf.mk
diff --git a/drivers/net/netdevsim/ethtool.c b/drivers/net/netdevsim/ethtool.c
index 5c80fbee7913..7ab358616e03 100644
--- a/drivers/net/netdevsim/ethtool.c
+++ b/drivers/net/netdevsim/ethtool.c
@@ -184,9 +184,11 @@ static const struct ethtool_ops nsim_ethtool_ops = {
static void nsim_ethtool_ring_init(struct netdevsim *ns)
{
+ ns->ethtool.ring.rx_pending = 512;
ns->ethtool.ring.rx_max_pending = 4096;
ns->ethtool.ring.rx_jumbo_max_pending = 4096;
ns->ethtool.ring.rx_mini_max_pending = 4096;
+ ns->ethtool.ring.tx_pending = 512;
ns->ethtool.ring.tx_max_pending = 4096;
}
diff --git a/tools/testing/selftests/net/lib/xdp_dummy.bpf.c b/tools/testing/selftests/net/lib/xdp_dummy.bpf.c
new file mode 100644
index 000000000000..d988b2e0cee8
--- /dev/null
+++ b/tools/testing/selftests/net/lib/xdp_dummy.bpf.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define KBUILD_MODNAME "xdp_dummy"
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+
+SEC("xdp")
+int xdp_dummy_prog(struct xdp_md *ctx)
+{
+ return XDP_PASS;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/drivers/net/hds.py b/tools/testing/selftests/drivers/net/hds.py
index 394971b25c0b..90807b21a6eb 100755
--- a/tools/testing/selftests/drivers/net/hds.py
+++ b/tools/testing/selftests/drivers/net/hds.py
@@ -2,17 +2,54 @@
# SPDX-License-Identifier: GPL-2.0
import errno
+import os
from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_raises, KsftSkipEx
-from lib.py import EthtoolFamily, NlError
+from lib.py import CmdExitFailure, EthtoolFamily, NlError
from lib.py import NetDrvEnv
+from lib.py import defer, ethtool, ip
-def get_hds(cfg, netnl) -> None:
+
+def _get_hds_mode(cfg, netnl) -> str:
try:
rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
except NlError as e:
raise KsftSkipEx('ring-get not supported by device')
if 'tcp-data-split' not in rings:
raise KsftSkipEx('tcp-data-split not supported by device')
+ return rings['tcp-data-split']
+
+
+def _xdp_onoff(cfg):
+ test_dir = os.path.dirname(os.path.realpath(__file__))
+ prog = test_dir + "/../../net/lib/xdp_dummy.bpf.o"
+ ip(f"link set dev %s xdp obj %s sec xdp" %
+ (cfg.ifname, prog))
+ ip(f"link set dev %s xdp off" % cfg.ifname)
+
+
+def _ioctl_ringparam_modify(cfg, netnl) -> None:
+ """
+ Helper for performing a hopefully unimportant IOCTL SET.
+ IOCTL does not support HDS, so it should not affect the HDS config.
+ """
+ try:
+ rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+ except NlError as e:
+ raise KsftSkipEx('ring-get not supported by device')
+
+ if 'tx' not in rings:
+ raise KsftSkipEx('setting Tx ring size not supported')
+
+ try:
+ ethtool(f"--disable-netlink -G {cfg.ifname} tx {rings['tx'] // 2}")
+ except CmdExitFailure as e:
+ ethtool(f"--disable-netlink -G {cfg.ifname} tx {rings['tx'] * 2}")
+ defer(ethtool, f"-G {cfg.ifname} tx {rings['tx']}")
+
+
+def get_hds(cfg, netnl) -> None:
+ _get_hds_mode(cfg, netnl)
+
def get_hds_thresh(cfg, netnl) -> None:
try:
@@ -104,6 +141,103 @@ from lib.py import NetDrvEnv
netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': hds_gt})
ksft_eq(e.exception.nl_msg.error, -errno.EINVAL)
+
+def set_xdp(cfg, netnl) -> None:
+ """
+ Enable single-buffer XDP on the device.
+ When HDS is in "auto" / UNKNOWN mode, XDP installation should work.
+ """
+ mode = _get_hds_mode(cfg, netnl)
+ if mode == 'enabled':
+ netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'unknown'})
+
+ _xdp_onoff(cfg)
+
+
+def enabled_set_xdp(cfg, netnl) -> None:
+ """
+ Enable single-buffer XDP on the device.
+ When HDS is in "enabled" mode, XDP installation should not work.
+ """
+ _get_hds_mode(cfg, netnl)
+ netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'enabled'})
+
+ defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'unknown'})
+
+ with ksft_raises(CmdExitFailure) as e:
+ _xdp_onoff(cfg)
+
+
+def set_xdp(cfg, netnl) -> None:
+ """
+ Enable single-buffer XDP on the device.
+ When HDS is in "auto" / UNKNOWN mode, XDP installation should work.
+ """
+ mode = _get_hds_mode(cfg, netnl)
+ if mode == 'enabled':
+ netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'unknown'})
+
+ _xdp_onoff(cfg)
+
+
+def enabled_set_xdp(cfg, netnl) -> None:
+ """
+ Enable single-buffer XDP on the device.
+ When HDS is in "enabled" mode, XDP installation should not work.
+ """
+ _get_hds_mode(cfg, netnl) # Trigger skip if not supported
+
+ netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'enabled'})
+ defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'unknown'})
+
+ with ksft_raises(CmdExitFailure) as e:
+ _xdp_onoff(cfg)
+
+
+def ioctl(cfg, netnl) -> None:
+ mode1 = _get_hds_mode(cfg, netnl)
+ _ioctl_ringparam_modify(cfg, netnl)
+ mode2 = _get_hds_mode(cfg, netnl)
+
+ ksft_eq(mode1, mode2)
+
+
+def ioctl_set_xdp(cfg, netnl) -> None:
+ """
+ Like set_xdp(), but we perturb the settings via the legacy ioctl.
+ """
+ mode = _get_hds_mode(cfg, netnl)
+ if mode == 'enabled':
+ netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'unknown'})
+
+ _ioctl_ringparam_modify(cfg, netnl)
+
+ _xdp_onoff(cfg)
+
+
+def ioctl_enabled_set_xdp(cfg, netnl) -> None:
+ """
+ Enable single-buffer XDP on the device.
+ When HDS is in "enabled" mode, XDP installation should not work.
+ """
+ _get_hds_mode(cfg, netnl) # Trigger skip if not supported
+
+ netnl.rings_set({'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'enabled'})
+ defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex},
+ 'tcp-data-split': 'unknown'})
+
+ with ksft_raises(CmdExitFailure) as e:
+ _xdp_onoff(cfg)
+
+
def main() -> None:
with NetDrvEnv(__file__, queue_count=3) as cfg:
ksft_run([get_hds,
@@ -112,7 +246,12 @@ from lib.py import NetDrvEnv
set_hds_enable,
set_hds_thresh_zero,
set_hds_thresh_max,
- set_hds_thresh_gt],
+ set_hds_thresh_gt,
+ set_xdp,
+ enabled_set_xdp,
+ ioctl,
+ ioctl_set_xdp,
+ ioctl_enabled_set_xdp],
args=(cfg, EthtoolFamily()))
ksft_exit()
--
2.48.1
Powered by blists - more mailing lists