netdev - Re: [PATCH net-next v2 1/3] net: phy: mediatek: Add 2.5Gphy firmware dt-bindings and dts node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ff96f5d38e089fdd76294265f33d7230c573ba69.camel@mediatek.com>
Date: Tue, 25 Feb 2025 10:59:59 +0000
From: SkyLake Huang (黃啟澤)
	<SkyLake.Huang@...iatek.com>
To: "daniel@...rotopia.org" <daniel@...rotopia.org>, "andrew@...n.ch"
	<andrew@...n.ch>
CC: "linux-mediatek@...ts.infradead.org" <linux-mediatek@...ts.infradead.org>,
	"linux@...linux.org.uk" <linux@...linux.org.uk>, "hkallweit1@...il.com"
	<hkallweit1@...il.com>, Steven Liu (劉人豪)
	<steven.liu@...iatek.com>, "davem@...emloft.net" <davem@...emloft.net>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org"
	<linux-arm-kernel@...ts.infradead.org>, "pabeni@...hat.com"
	<pabeni@...hat.com>, "kuba@...nel.org" <kuba@...nel.org>, "dqfext@...il.com"
	<dqfext@...il.com>, "matthias.bgg@...il.com" <matthias.bgg@...il.com>,
	"horms@...nel.org" <horms@...nel.org>, "edumazet@...gle.com"
	<edumazet@...gle.com>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next v2 1/3] net: phy: mediatek: Add 2.5Gphy firmware
 dt-bindings and dts node

On Wed, 2025-02-19 at 15:30 +0000, Daniel Golle wrote:
> 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> On Wed, Feb 19, 2025 at 04:26:21PM +0100, Andrew Lunn wrote:
> > > +description: |
> > > +  MediaTek Built-in 2.5G Ethernet PHY needs to load firmware so
> > > it can
> > > +  run correctly.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: "mediatek,2p5gphy-fw"
> > > +
> > > +  reg:
> > > +    items:
> > > +      - description: pmb firmware load address
> > > +      - description: firmware trigger register
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    phyfw: phy-firmware@...0000 {
> > > +      compatible = "mediatek,2p5gphy-fw";
> > > +      reg = <0 0x0f100000 0 0x20000>,
> > > +            <0 0x0f0f0018 0 0x20>;
> > > +    };
> > 
> > This is not a device in itself is it? There is no driver for this.
> > 
> > It seems like these should be properties in the PHY node, since it
> > is
> > the PHY driver which make use of them. This cannot be the first SoC
> > device which is both on some sort of serial bus, but also has
> > memory
> > mapped registers.
> 
> I'm afraid it is...
> 
It's actually MCU's memory mapped registers. This MCU will control all
of this built-in the 2.5Gphy's behaviors and it provides faster bus
access speed than MDC/MDIO.

> > Please look around and find the correct way to do this.
> 
> Would using a 'reserved-memory' region be an option maybe?
Or maybe just leave those mapped registers' addresses in driver code
(mtk-2p5ge.c)? Like:
#define MT7988_2P5GE_PMB_BASE (0x0f100000)
#define MT7988_2P5GE_PMB_LEN  (0x20000)

I'm not sure which is more Linux upstream style.

BRs,
Sky