[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250226000748.3979148-1-chris.packham@alliedtelesis.co.nz>
Date: Wed, 26 Feb 2025 13:07:46 +1300
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
tsbogend@...ha.franken.de,
andrew@...n.ch,
hkallweit1@...il.com,
linux@...linux.org.uk,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
sander@...nheule.net,
markus.stockhausen@....de
Cc: devicetree@...r.kernel.org,
linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH net-next v7 0/2] RTL9300 MDIO driver
This series adds a driver for the MDIO controller on the RTL9300 family
of devices. The controller is a little unique in that we can't access the SMI
interfaces directly. This means we need to use the hardware description from
the DTS to compute a mapping of switch port to mdio bus/address.
The dt-bindings have been applied to net-next.
I've dropped a patch that added PHYs to the cameo-rtl9302c board as I know that
will need updating once some of the other in-flight changes make it into
linux-mips.
Chris Packham (2):
net: mdio: Add RTL9300 MDIO driver
mips: dts: realtek: Add MDIO controller
arch/mips/boot/dts/realtek/rtl930x.dtsi | 33 ++
drivers/net/mdio/Kconfig | 7 +
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/mdio-realtek-rtl9300.c | 475 ++++++++++++++++++++++++
4 files changed, 516 insertions(+)
create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c
--
2.48.1
Powered by blists - more mailing lists