lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA85sZv5rQr4g=72-Tw47wSE_iFPHS4tB8Bgqcs59sdh1Me2sw@mail.gmail.com>
Date: Wed, 26 Feb 2025 13:26:31 +0100
From: Ian Kumlien <ian.kumlien@...il.com>
To: Nikolay Aleksandrov <razor@...ckwall.org>
Cc: Jakub Kicinski <kuba@...nel.org>, 
	Linux Kernel Network Developers <netdev@...r.kernel.org>
Subject: Re: [6.12.15][be2net?] Voluntary context switch within RCU read-side
 critical section!

On Wed, Feb 26, 2025 at 1:00 PM Nikolay Aleksandrov <razor@...ckwall.org> wrote:
>
> On 2/26/25 13:52, Ian Kumlien wrote:
> > On Wed, Feb 26, 2025 at 11:33 AM Nikolay Aleksandrov
> > <razor@...ckwall.org> wrote:
> >>
> >> On 2/26/25 11:55, Ian Kumlien wrote:
> >>> On Wed, Feb 26, 2025 at 10:24 AM Ian Kumlien <ian.kumlien@...il.com> wrote:
> >>>>
> >>>> On Wed, Feb 26, 2025 at 2:05 AM Jakub Kicinski <kuba@...nel.org> wrote:
> >>>>>
> >>>>> On Tue, 25 Feb 2025 11:13:47 +0100 Ian Kumlien wrote:
> >>>>>> Same thing happens in 6.13.4, FYI
> >>>>>
> >>>>> Could you do a minor bisection? Does it not happen with 6.11?
> >>>>> Nothing jumps out at quick look.
> >>>>
> >>>> I have to admint that i haven't been tracking it too closely until it
> >>>> turned out to be an issue
> >>>> (makes network traffic over wireguard, through that node very slow)
> >>>>
> >>>> But i'm pretty sure it was ok in early 6.12.x - I'll try to do a bisect though
> >>>> (it's a gw to reach a internal server network in the basement, so not
> >>>> the best setup for this)
> >>>
> >>> Since i'm at work i decided to check if i could find all the boot
> >>> logs, which is actually done nicely by systemd
> >>> first known bad: 6.11.7-300.fc41.x86_64
> >>> last known ok: 6.11.6-200.fc40.x86_64
> >>>
> >>> Narrows the field for a bisect at least, =)
> >>>
> >>
> >> Saw bridge, took a look. :)
> >>
> >> I think there are multiple issues with benet's be_ndo_bridge_getlink()
> >> because it calls be_cmd_get_hsw_config() which can sleep in multiple
> >> places, e.g. the most obvious is the mutex_lock() in the beginning of
> >> be_cmd_get_hsw_config(), then we have the call trace here which is:
> >> be_cmd_get_hsw_config -> be_mcc_notify_wait -> be_mcc_wait_compl -> usleep_range()
> >>
> >> Maybe you updated some tool that calls down that path along with the kernel and system
> >> so you started seeing it in Fedora 41?
> >
> > Could be but it's pretty barebones
> >
> >> IMO this has been problematic for a very long time, but obviously it depends on the
> >> chip type. Could you share your benet chip type to confirm the path?
> >
> > I don't know how to find the actual chip information but it's identified as:
> > Emulex Corporation OneConnect NIC (Skyhawk) (rev 10)
> >
>
> Good, that confirms it. The skyhawk chip falls in the "else" of the block in
> be_ndo_bridge_getlink() which calls be_cmd_get_hsw_config().
>
> >> For the blamed commit I'd go with:
> >>  commit b71724147e73
> >>  Author: Sathya Perla <sathya.perla@...adcom.com>
> >>  Date:   Wed Jul 27 05:26:18 2016 -0400
> >>
> >>      be2net: replace polling with sleeping in the FW completion path
> >>
> >> This one changed the udelay() (which is safe) to usleep_range() and the spinlock
> >> to a mutex.
> >
> > So, first try will be to try without that patch then, =)
> >
>
> That would be a good try, yes. It is not a straight-forward revert though since a lot
> of changes have happened since that commit. Let me know if you need help with that,
> I can prepare the revert to test.

Yeah, looked at the size of it and... well... I dunno if i'd have the time =)

> >> Cheers,
> >>  Nik
> >>
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ