[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1tna14-0052tT-S4@rmk-PC.armlinux.org.uk>
Date: Thu, 27 Feb 2025 09:17:14 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Drew Fustini <drew@...7.com>,
Eric Dumazet <edumazet@...gle.com>,
Fu Wei <wefu@...hat.com>,
Guo Ren <guoren@...nel.org>,
Jakub Kicinski <kuba@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-riscv@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH net-next 11/11] net: stmmac: thead: switch to use
set_clk_tx_rate() hook
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
.../net/ethernet/stmicro/stmmac/dwmac-thead.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
index f9f2bd65959f..c72ee759aae5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
@@ -101,10 +101,11 @@ static int thead_dwmac_set_txclk_dir(struct plat_stmmacenet_data *plat)
return 0;
}
-static void thead_dwmac_fix_speed(void *priv, int speed, unsigned int mode)
+static int thead_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
+ phy_interface_t interface, int speed)
{
+ struct thead_dwmac *dwmac = bsp_priv;
struct plat_stmmacenet_data *plat;
- struct thead_dwmac *dwmac = priv;
unsigned long rate;
long tx_rate;
u32 div, reg;
@@ -114,7 +115,7 @@ static void thead_dwmac_fix_speed(void *priv, int speed, unsigned int mode)
switch (plat->mac_interface) {
/* For MII, rxc/txc is provided by phy */
case PHY_INTERFACE_MODE_MII:
- return;
+ return 0;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
@@ -127,23 +128,24 @@ static void thead_dwmac_fix_speed(void *priv, int speed, unsigned int mode)
tx_rate = rgmii_clock(speed);
if (tx_rate < 0) {
dev_err(dwmac->dev, "invalid speed %d\n", speed);
- return;
+ return tx_rate;
}
div = rate / tx_rate;
if (rate != tx_rate * div) {
dev_err(dwmac->dev, "invalid gmac rate %lu\n", rate);
- return;
+ return -EINVAL;
}
reg = FIELD_PREP(GMAC_PLLCLK_DIV_EN, 1) |
FIELD_PREP(GMAC_PLLCLK_DIV_NUM, div);
writel(reg, dwmac->apb_base + GMAC_PLLCLK_DIV);
- break;
+ return 0;
+
default:
dev_err(dwmac->dev, "unsupported phy interface %d\n",
plat->mac_interface);
- return;
+ return -EINVAL;
}
}
@@ -235,7 +237,7 @@ static int thead_dwmac_probe(struct platform_device *pdev)
dwmac->plat = plat;
dwmac->apb_base = apb;
plat->bsp_priv = dwmac;
- plat->fix_mac_speed = thead_dwmac_fix_speed;
+ plat->set_clk_tx_rate = thead_set_clk_tx_rate;
plat->init = thead_dwmac_init;
return devm_stmmac_pltfr_probe(pdev, plat, &stmmac_res);
--
2.30.2
Powered by blists - more mailing lists