[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Z8SxSU9lOgbNf0he@shell.armlinux.org.uk>
Date: Sun, 2 Mar 2025 19:28:09 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>
Cc: Prabhakar <prabhakar.csengg@...il.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Jose Abreu <joabreu@...opsys.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH 2/3] dt-bindings: net: Document GBETH bindings for
Renesas RZ/V2H(P) SoC
On Sun, Mar 02, 2025 at 08:10:26PM +0100, Andrew Lunn wrote:
> > + interrupts:
> > + items:
> > + - description: Subsystem interrupt
> > + - description: The interrupt to manage the remote wake-up packet detection
> > + - description: The interrupt that occurs when Tx/Rx enters/exits the LPI state
> > + - description: Per-channel transmission-0 completion interrupt
> > + - description: Per-channel transmission-1 completion interrupt
> > + - description: Per-channel transmission-2 completion interrupt
> > + - description: Per-channel transmission-3 completion interrupt
> > + - description: Per-channel receive-0 completion interrupt
> > + - description: Per-channel receive-1 completion interrupt
> > + - description: Per-channel receive-2 completion interrupt
> > + - description: Per-channel receive-3 completion interrupt
> > +
> > + interrupt-names:
> > + items:
> > + - const: macirq
> > + - const: eth_wake_irq
> > + - const: eth_lpi
> > + - const: tx0
> > + - const: tx1
> > + - const: tx2
> > + - const: tx3
> > + - const: rx0
> > + - const: rx1
> > + - const: rx2
> > + - const: rx3
>
> There has already been a discussion about trying to make the clock
> names more uniform. But what about interrupts? Which of these are in
> the IP databook? What names does the databook use for these
> interrupts?
>From a quick look, I haven't found anything that suggests the above
is possible, but it clearly is... so I'll look more tomorrow.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists