| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250305102103.1194277-4-o.rempel@pengutronix.de>
Date: Wed, 5 Mar 2025 11:21:02 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Woojung Huh <woojung.huh@...rochip.com>,
Andrew Lunn <andrew+netdev@...n.ch>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
kernel@...gutronix.de,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com
Subject: [PATCH v4 3/4] ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
Add pinmux groups required for the Plymovent AQM board.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 292 ++++++++++++++++++++
1 file changed, 292 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
index 95fafc51a1c8..40605ea85ee1 100644
--- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -25,6 +25,13 @@ pins {
};
};
+ /omit-if-no-ref/
+ adc1_in10_pins_a: adc1-in10-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 0, ANALOG)>;
+ };
+ };
+
/omit-if-no-ref/
adc12_ain_pins_a: adc12-ain-0 {
pins {
@@ -584,6 +591,43 @@ pins1 {
};
};
+ /omit-if-no-ref/
+ ethernet0_rmii_pins_d: rmii-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ ethernet0_rmii_sleep_pins_d: rmii-sleep-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+ };
+ };
+
/omit-if-no-ref/
fmc_pins_a: fmc-0 {
pins1 {
@@ -725,6 +769,25 @@ pins {
};
};
+ /omit-if-no-ref/
+ i2c1_pins_c: i2c1-2 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ /omit-if-no-ref/
+ i2c1_sleep_pins_c: i2c1-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
/omit-if-no-ref/
i2c2_pins_a: i2c2-0 {
pins {
@@ -819,6 +882,27 @@ pins {
};
};
+ /omit-if-no-ref/
+ i2s1_pins_a: i2s1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 6, AF5)>, /* I2S2_SDI */
+ <STM32_PINMUX('A', 4, AF5)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 5, AF5)>; /* I2S2_CK */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ i2s1_sleep_pins_a: i2s1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 6, ANALOG)>, /* I2S2_SDI */
+ <STM32_PINMUX('A', 4, ANALOG)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 5, ANALOG)>; /* I2S2_CK */
+ };
+ };
+
/omit-if-no-ref/
i2s2_pins_a: i2s2-0 {
pins {
@@ -1418,6 +1502,23 @@ pins {
};
};
+ /omit-if-no-ref/
+ pwm1_pins_d: pwm1-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ /omit-if-no-ref/
+ pwm1_sleep_pins_d: pwm1-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 0, ANALOG)>;
+ };
+ };
+
/omit-if-no-ref/
pwm2_pins_a: pwm2-0 {
pins {
@@ -2160,6 +2261,66 @@ pins3 {
};
};
+ /omit-if-no-ref/
+ sdmmc2_b4_pins_c: sdmmc2-b4-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ /omit-if-no-ref/
+ sdmmc2_b4_od_pins_c: sdmmc2-b4-od-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+
+ pins3 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ /omit-if-no-ref/
+ sdmmc2_b4_sleep_pins_c: sdmmc2-b4-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+ };
+
/omit-if-no-ref/
sdmmc2_d47_pins_a: sdmmc2-d47-0 {
pins {
@@ -2389,6 +2550,66 @@ pins {
};
};
+ /omit-if-no-ref/
+ sdmmc3_b4_pins_c: sdmmc3-b4-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ /omit-if-no-ref/
+ sdmmc3_b4_od_pins_c: sdmmc3-b4-od-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+
+ pins3 {
+ pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ /omit-if-no-ref/
+ sdmmc3_b4_sleep_pins_c: sdmmc3-b4-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+ };
+ };
+
/omit-if-no-ref/
spdifrx_pins_a: spdifrx-0 {
pins {
@@ -2600,6 +2821,41 @@ pins {
};
};
+ /omit-if-no-ref/
+ uart4_pins_e: uart4-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ uart4_idle_pins_e: uart4-idle-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ uart4_sleep_pins_e: uart4-sleep-4 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 8, ANALOG)>; /* UART4_RX */
+ };
+ };
+
/omit-if-no-ref/
uart5_pins_a: uart5-0 {
pins1 {
@@ -2677,6 +2933,23 @@ pins {
};
};
+ /omit-if-no-ref/
+ uart7_pins_d: uart7-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF7)>, /* UART7_TX */
+ <STM32_PINMUX('F', 8, AF7)>; /* UART7_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+ <STM32_PINMUX('F', 9, AF7)>; /* UART7_CTS */
+ bias-disable;
+ };
+ };
+
/omit-if-no-ref/
uart8_pins_a: uart8-0 {
pins1 {
@@ -3118,6 +3391,25 @@ pins {
};
};
+ /omit-if-no-ref/
+ i2c6_pins_b: i2c6-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, AF2)>, /* I2C6_SCL */
+ <STM32_PINMUX('A', 12, AF2)>; /* I2C6_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ /omit-if-no-ref/
+ i2c6_sleep_pins_b: i2c6-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C6_SCL */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C6_SDA */
+ };
+ };
+
/omit-if-no-ref/
spi1_pins_a: spi1-0 {
pins1 {
--
2.39.5
Powered by blists - more mailing lists