[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250310132103.1312d1b6@kmaincent-XPS-13-7390>
Date: Mon, 10 Mar 2025 13:21:03 +0100
From: Kory Maincent <kory.maincent@...tlin.com>
To: Maxime Chevallier <maxime.chevallier@...tlin.com>
Cc: davem@...emloft.net, Andrew Lunn <andrew@...n.ch>, Jakub Kicinski
<kuba@...nel.org>, Eric Dumazet <edumazet@...gle.com>, Paolo Abeni
<pabeni@...hat.com>, Heiner Kallweit <hkallweit1@...il.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
thomas.petazzoni@...tlin.com, linux-arm-kernel@...ts.infradead.org,
Christophe Leroy <christophe.leroy@...roup.eu>, Herve Codina
<herve.codina@...tlin.com>, Florian Fainelli <f.fainelli@...il.com>,
Russell King <linux@...linux.org.uk>, Vladimir Oltean
<vladimir.oltean@....com>, Oleksij Rempel <o.rempel@...gutronix.de>, Simon
Horman <horms@...nel.org>, Romain Gantois <romain.gantois@...tlin.com>,
Piergiorgio Beruto <piergiorgio.beruto@...il.com>, Stanislav Fomichev
<sdf@...ichev.me>
Subject: Re: [PATCH net-next v2 4/7] net: ethtool: netlink: Introduce
per-phy DUMP helpers
On Sat, 8 Mar 2025 16:54:36 +0100
Maxime Chevallier <maxime.chevallier@...tlin.com> wrote:
> As there are multiple ethnl commands that report messages based on
> phy_device information, let's introduce a set of ethnl generic dump
> helpers to allow DUMP support for each PHY on a given netdev.
>
> This logic iterates over the phy_link_topology of each netdev (or a
> single netdev for filtered DUMP), and call ethnl_default_dump_one() with
> the req_info populated with ifindex + phyindex.
>
> This allows re-using all the existing infra for phy-targetting commands
> that already use ethnl generic helpers.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
> ---
> V2: Rebase
>
> net/ethtool/netlink.c | 53 +++++++++++++++++++++++++++++++++++++++++++
> net/ethtool/netlink.h | 6 +++++
> 2 files changed, 59 insertions(+)
>
> diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
> index ae06b72239a8..a09bcd67b38f 100644
> --- a/net/ethtool/netlink.c
> +++ b/net/ethtool/netlink.c
> @@ -559,6 +559,59 @@ static int ethnl_default_dump_one(struct sk_buff *skb,
> return ret;
> }
>
> +/* Specific context for phy-targeting command DUMP operatins. We keep in
> context
> + * the latest phy_index we dumped, in case of an interrupted DUMP.
> + */
> +struct ethnl_dump_ctx_perphy {
> + unsigned long phy_index;
> +};
> +
> +int ethnl_dump_start_perphy(struct ethnl_dump_ctx *ctx)
Could you add comments or event better, kdoc for non static function to explain
their purpose.
> +{
> + struct ethnl_dump_ctx_perphy *dump_ctx;
> +
> + dump_ctx = kzalloc(sizeof(*dump_ctx), GFP_KERNEL);
> + if (!dump_ctx)
> + return -ENOMEM;
> +
> + ctx->cmd_ctx = dump_ctx;
> +
> + return 0;
> +}
> +
> +void ethnl_dump_done_perphy(struct ethnl_dump_ctx *ctx)
same.
> +{
> + kfree(ctx->cmd_ctx);
> +}
> +
> +int ethnl_dump_one_dev_perphy(struct sk_buff *skb,
> + struct ethnl_dump_ctx *ctx,
> + const struct genl_info *info)
same.
> +{
> + struct ethnl_dump_ctx_perphy *dump_ctx = ctx->cmd_ctx;
> + struct net_device *dev = ctx->reply_data->dev;
> + struct phy_device_node *pdn;
> + int ret = 0;
> +
> + if (!dev->link_topo)
> + return 0;
> +
> + xa_for_each_start(&dev->link_topo->phys, dump_ctx->phy_index,
> + pdn, dump_ctx->phy_index) {
> + ctx->req_info->phy_index = dump_ctx->phy_index;
> +
> + /* We can re-use the original dump_one as ->prepare_data in
> + * commands use ethnl_req_get_phydev(), which gets the PHY
> from
> + * what's in req_info
> + */
> + ret = ethnl_default_dump_one(skb, ctx, info);
> + if (ret)
> + break;
> + }
> +
> + return ret;
> +}
Regards,
---
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
Powered by blists - more mailing lists