lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CABBYNZ+b31WUEB_H=ZWCvjOSGMpoHpxCZZs5OrMw2uaqbCxQqQ@mail.gmail.com>
Date: Mon, 24 Mar 2025 09:07:42 -0400
From: Luiz Augusto von Dentz <luiz.dentz@...il.com>
To: davem@...emloft.net, kuba@...nel.org
Cc: linux-bluetooth@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [GIT PULL] bluetooth-next 2025-03-20

Hi,

On Thu, Mar 20, 2025 at 3:29 PM Luiz Augusto von Dentz
<luiz.dentz@...il.com> wrote:
>
> The following changes since commit 6855b9be9cf70d3fd4b4b9a00696eae65335320c:
>
>   Merge branch 'mptcp-pm-prep-work-for-new-ops-and-sysctl-knobs' (2025-03-20 10:14:53 +0100)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2025-03-20
>
> for you to fetch changes up to 1a6e1539e97303c60d82e3d5e163973e771a9d7f:
>
>   Bluetooth: btnxpuart: Fix kernel panic during FW release (2025-03-20 14:59:07 -0400)
>
> ----------------------------------------------------------------
> bluetooth-next pull request for net-next:
>
> core:
>
>  - Add support for skb TX SND/COMPLETION timestamping
>  - hci_core: Enable buffer flow control for SCO/eSCO
>  - coredump: Log devcd dumps into the monitor
>
>  drivers:
>
>  - btusb: Add 2 HWIDs for MT7922
>  - btusb: Fix regression in the initialization of fake Bluetooth controllers
>  - btusb: Add 14 USB device IDs for Qualcomm WCN785x
>  - btintel: Add support for Intel Scorpius Peak
>  - btintel: Add support to configure TX power
>  - btintel: Add DSBR support for ScP
>  - btintel_pcie: Add device id of Whale Peak
>  - btintel_pcie: Setup buffers for firmware traces
>  - btintel_pcie: Read hardware exception data
>  - btintel_pcie: Add support for device coredump
>  - btintel_pcie: Trigger device coredump on hardware exception
>  - btnxpuart: Support for controller wakeup gpio config
>  - btnxpuart: Add support to set BD address
>  - btnxpuart: Add correct bootloader error codes
>  - btnxpuart: Handle bootloader error during cmd5 and cmd7
>  - btnxpuart: Fix kernel panic during FW release
>  - qca: add WCN3950 support
>  - hci_qca: use the power sequencer for wcn6750
>  - btmtksdio: Prevent enabling interrupts after IRQ handler removal
>
> ----------------------------------------------------------------
> Arkadiusz Bokowy (1):
>       Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters
>
> Arseniy Krasnov (2):
>       Bluetooth: hci_uart: fix race during initialization
>       Bluetooth: hci_uart: Fix another race during initialization
>
> Dan Carpenter (1):
>       Bluetooth: Fix error code in chan_alloc_skb_cb()
>
> Dmitry Baryshkov (3):
>       dt-bindings: net: bluetooth: qualcomm: document WCN3950
>       Bluetooth: qca: simplify WCN399x NVM loading
>       Bluetooth: qca: add WCN3950 support
>
> Dorian Cruveiller (1):
>       Bluetooth: btusb: Add new VID/PID for WCN785x
>
> Douglas Anderson (1):
>       Bluetooth: btusb: mediatek: Add err code to btusb claim iso printout
>
> Dr. David Alan Gilbert (2):
>       Bluetooth: MGMT: Remove unused mgmt_pending_find_data
>       Bluetooth: MGMT: Remove unused mgmt_*_discovery_complete
>
> Easwar Hariharan (4):
>       Bluetooth: hci_vhci: convert timeouts to secs_to_jiffies()
>       Bluetooth: MGMT: convert timeouts to secs_to_jiffies()
>       Bluetooth: SMP: convert timeouts to secs_to_jiffies()
>       Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()
>
> Hao Qin (1):
>       Bluetooth: btmtk: Remove the resetting step before downloading the fw
>
> Janaki Ramaiah Thota (1):
>       Bluetooth: hci_qca: use the power sequencer for wcn6750
>
> Jeremy Clifton (1):
>       Bluetooth: Fix code style warning
>
> Jiande Lu (1):
>       Bluetooth: btusb: Add 2 HWIDs for MT7922
>
> Kiran K (8):
>       Bluetooth: btintel: Add support for Intel Scorpius Peak
>       Bluetooth: btintel_pcie: Add device id of Whale Peak
>       Bluetooth: btintel: Add DSBR support for ScP
>       Bluetooth: btintel_pcie: Setup buffers for firmware traces
>       Bluetooth: btintel_pcie: Read hardware exception data
>       Bluetooth: btintel_pcie: Add support for device coredump
>       Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
>       Bluetooth: btintel: Fix leading white space
>
> Loic Poulain (2):
>       bluetooth: btnxpuart: Support for controller wakeup gpio config
>       dt-bindings: net: bluetooth: nxp: Add wakeup pin properties
>
> Luiz Augusto von Dentz (4):
>       Bluetooth: btintel_pci: Fix build warning
>       Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
>       Bluetooth: hci_vhci: Mark Sync Flow Control as supported
>       HCI: coredump: Log devcd dumps into the monitor
>
> Neeraj Sanjay Kale (7):
>       Bluetooth: btnxpuart: Move vendor specific initialization to .post_init
>       Bluetooth: btnxpuart: Add support for HCI coredump feature
>       dt-bindings: net: bluetooth: nxp: Add support to set BD address
>       Bluetooth: btnxpuart: Add support to set BD address
>       Bluetooth: btnxpuart: Add correct bootloader error codes
>       Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
>       Bluetooth: btnxpuart: Fix kernel panic during FW release
>
> Pauli Virtanen (5):
>       net-timestamp: COMPLETION timestamp on packet tx completion
>       Bluetooth: add support for skb TX SND/COMPLETION timestamping
>       Bluetooth: ISO: add TX timestamping
>       Bluetooth: L2CAP: add TX timestamping
>       Bluetooth: SCO: add TX timestamping
>
> Pedro Nishiyama (4):
>       Bluetooth: Add quirk for broken READ_VOICE_SETTING
>       Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE
>       Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken
>       Bluetooth: btusb: Fix regression in the initialization of fake Bluetooth controllers
>
> Sean Wang (1):
>       Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
>
> Vijay Satija (1):
>       Bluetooth: btintel: Add support to configure TX power
>
> Wentao Guan (1):
>       Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
>
> Zijun Hu (1):
>       Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x
>
>  .../bindings/net/bluetooth/nxp,88w8987-bt.yaml     |  18 +-
>  .../bindings/net/bluetooth/qualcomm-bluetooth.yaml |   2 +
>  Documentation/networking/timestamping.rst          |   8 +
>  drivers/bluetooth/bfusb.c                          |   3 +-
>  drivers/bluetooth/btintel.c                        | 341 ++++++++++++
>  drivers/bluetooth/btintel.h                        |  24 +
>  drivers/bluetooth/btintel_pcie.c                   | 582 ++++++++++++++++++++-
>  drivers/bluetooth/btintel_pcie.h                   |  93 ++++
>  drivers/bluetooth/btmtk.c                          |  10 -
>  drivers/bluetooth/btmtksdio.c                      |   3 +-
>  drivers/bluetooth/btnxpuart.c                      | 407 +++++++++++---
>  drivers/bluetooth/btqca.c                          |  27 +-
>  drivers/bluetooth/btqca.h                          |   4 +
>  drivers/bluetooth/btusb.c                          |  36 +-
>  drivers/bluetooth/hci_ldisc.c                      |  19 +-
>  drivers/bluetooth/hci_qca.c                        |  27 +-
>  drivers/bluetooth/hci_uart.h                       |   1 +
>  drivers/bluetooth/hci_vhci.c                       |   5 +-
>  include/linux/skbuff.h                             |   7 +-
>  include/net/bluetooth/bluetooth.h                  |   1 +
>  include/net/bluetooth/hci.h                        |  36 +-
>  include/net/bluetooth/hci_core.h                   |  27 +-
>  include/net/bluetooth/l2cap.h                      |   7 +-
>  include/uapi/linux/errqueue.h                      |   1 +
>  include/uapi/linux/net_tstamp.h                    |   6 +-
>  net/bluetooth/6lowpan.c                            |   9 +-
>  net/bluetooth/coredump.c                           |  28 +-
>  net/bluetooth/hci_conn.c                           | 122 +++++
>  net/bluetooth/hci_core.c                           |  77 +--
>  net/bluetooth/hci_event.c                          |  15 +-
>  net/bluetooth/hci_sync.c                           |  32 +-
>  net/bluetooth/iso.c                                |  24 +-
>  net/bluetooth/l2cap_core.c                         |  45 +-
>  net/bluetooth/l2cap_sock.c                         |  15 +-
>  net/bluetooth/mgmt.c                               |  46 +-
>  net/bluetooth/mgmt_util.c                          |  17 -
>  net/bluetooth/mgmt_util.h                          |   4 -
>  net/bluetooth/sco.c                                |  19 +-
>  net/bluetooth/smp.c                                |   4 +-
>  net/core/skbuff.c                                  |   2 +
>  net/ethtool/common.c                               |   1 +
>  net/socket.c                                       |   3 +
>  42 files changed, 1890 insertions(+), 268 deletions(-)

Is there a problem that these changes haven't been pulled yet?

-- 
Luiz Augusto von Dentz

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ