Message-ID: <Z_V--XONvQZaFCJ8@shredder>
Date: Tue, 8 Apr 2025 22:54:33 +0300
From: Ido Schimmel <idosch@...sch.org>
To: hanhuihui <hanhuihui5@...wei.com>
Cc: dsahern@...nel.org, kuba@...nel.org, netdev@...r.kernel.org
Subject: Re: VRF Routing Rule Matching Issue: oif Rules Not Working After
 Commit 40867d74c374

On Wed, Apr 09, 2025 at 12:17:56AM +0800, hanhuihui wrote:
> On Mon, 7 Apr 2025 11:29:02 +0300, Ido Schimmel wrote:
> >On Thu, Apr 03, 2025 at 01:58:46AM +0000, hanhuihui wrote:
> >> Dear Kernel Community and Network Maintainers,
> >> I am analyzing the issue, and I am very happy for any replies.
> >> After the application committed 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices"), we noticed an unexpected change in VRF routing rule matching behavior. We hereby submit a problem report to confirm whether this is the expected behavior.
> >> 
> >> Problem Description:
> >> When interfaces bound to multiple VRFs share the same IP address, the OIF (output interface) routing rule is no longer matched after being committed. As a result, traffic incorrectly matches the low-priority rule.
> >> Here are our configuration steps:
> >> ip address add 11.47.3.130/16 dev enp4s0
> >> ip address add 11.47.3.130/16 dev enp5s0
> >> 
> >> ip link add name vrf-srv-1 type vrf table 10
> >> ip link set dev vrf-srv-1 up
> >> ip link set dev enp4s0 master vrf-srv-1
> >> 
> >> ip link add name vrf-srv type vrf table 20
> >> ip link set dev vrf-srv up
> >> ip link set dev enp5s0 master vrf-srv
> >> 
> >> ip rule add from 11.47.3.130 oif vrf-srv-1 table 10 prio 0
> >> ip rule add from 11.47.3.130 iif vrf-srv-1 table 10 prio 0
> >> ip rule add from 11.47.3.130 table 20 prio 997
> >> 
> >> 
> >> In this configuration, when the following commands are executed:
> >> ip vrf exec vrf-srv-1 ping "11.47.9.250" -I 11.47.3.130
> >> Expected behavior: The traffic should match the oif vrf-srv-1 rule of prio 0. Table 10 is used.
> >> Actual behavior: The traffic skips the oif rule and matches the default rule of prio 997 (Table 20), causing the ping to fail.
> >> 
> >> Is this the expected behavior?
> >> The submission description mentions "avoid oif reset of port devices". Does this change the matching logic of oif in VRF scenarios?
> >> If this change is intentional, how should the VRF configuration be adjusted to ensure that oif rules are matched first? Is it necessary to introduce a new mechanism?
> >
> >Can you try replacing the first two rules with:
> >
> >ip rule add from 11.47.3.130 l3mdev prio 0
> >
> 
> This does not work in scenarios where the routing table specified by the oif/iif is not in the l3mdev-table.

You mean when "oif" / "iif" points to a VRF and "table" specifies a
table different than the one associated with the VRF? Then, yes, it
won't work, but in your example "vrf-srv-1" is associated with table
"10".

> 
> >And see if it helps?
> >
> >It's not exactly equivalent to your two rules, but it says "if source
> >address is 11.47.3.130 and flow is associated with a L3 master device,
> >then direct the FIB lookup to the table associated with the L3 master
> >device"
> >
> >The commit you referenced added the index of the L3 master device to the
> >flow structure, but I don't believe we have an explicit way to match on
> >it using FIB rules. It would be useful to add a new keyword (e.g.,
> >l3mdevif) and then your rules can become:
> >
> >ip rule add from 11.47.3.130 l3mdevif vrf-srv-1 table 10 prio 0
> >ip rule add from 11.47.3.130 table 20 prio 997
> >
> >But it requires kernel changes.
> 
> Before the patch is installed, oif/iif rules can be configured for traffic from the VRF and traffic can be forwarded normally. 
> However, in this patch, traffic from the VRF resets fl->flowi_oif in l3mdev_update_flow. As a result, the 'rule->oifindex != fl->flowi_oif' 
> condition in fib_rule_match cannot be met, the oif rule cannot be matched. The patch also mentions "oif set to L3mdev directs lookup to its table; 
> reset to avoid oif match in fib_lookup" in the modification, which seems to be intentional. I'm rather confused about this. Does the modification 
> ignore the scenario where the oif/iif rule is configured on the VRF, or is the usage of the oif/iif rule no longer supported by the community after 
> the patch is installed, or is the usage of the oif/iif rule incorrectly used?
> Any reply would be greatly appreciated.

Before 40867d74c374 you couldn't match with FIB rules on oif/iif being a
VRF slave because these fields in the flow structure were reset to the
index of the VRF device in l3mdev_update_flow().

I will try to check if we can interpret FIB rules with "oif" / "iif"
pointing to a VRF as matching on "fl->flowi_l3mdev" rather than
"fl->flowi_oif" / "fl->flowi_iif".

Powered by blists - more mailing lists