[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250410190733.GV395307@horms.kernel.org>
Date: Thu, 10 Apr 2025 20:07:33 +0100
From: Simon Horman <horms@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Daniel Golle <daniel@...rotopia.org>,
Qingfang Deng <dqfext@...il.com>,
SkyLake Huang <SkyLake.Huang@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Randy Dunlap <rdunlap@...radead.org>, Arnd Bergmann <arnd@...db.de>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [net-next PATCH v2 2/2] net: phy: mediatek: add Airoha PHY ID to
SoC driver
On Thu, Apr 10, 2025 at 12:04:04PM +0200, Christian Marangi wrote:
> Airoha AN7581 SoC ship with a Switch based on the MT753x Switch embedded
> in other SoC like the MT7581 and the MT7988. Similar to these they
> require configuring some pin to enable LED PHYs.
>
> Add support for the PHY ID for the Airoha embedded Switch and define a
> simple probe function to toggle these pins. Also fill the LED functions
> and add dedicated function to define LED polarity.
>
> Reviewed-by: Andrew Lunn <andrew@...n.ch>
> Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
...
> diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
...
> +static int an7581_phy_led_polarity_set(struct phy_device *phydev, int index,
> + unsigned long modes)
> +{
> + u32 mode;
> + u16 val;
> +
> + if (index >= MTK_PHY_MAX_LEDS)
> + return -EINVAL;
> +
> + for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
> + switch (mode) {
> + case PHY_LED_ACTIVE_LOW:
> + val = MTK_PHY_LED_ON_POLARITY;
> + break;
> + case PHY_LED_ACTIVE_HIGH:
> + val = 0;
> + break;
> + default:
> + return -EINVAL;
> + }
> + }
> +
> + return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
> + MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
> + MTK_PHY_LED_ON_POLARITY, val);
Hi Christian,
Perhaps this cannot occur in practice, but if the for_each_set_bit
loop iterates zero times then val will be used uninitialised here.
Flagged by Smatch.
> +}
...
Powered by blists - more mailing lists