[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a2f9f3ec-d939-4a46-99a5-49ce7d86458c@lunn.ch>
Date: Fri, 18 Apr 2025 17:50:22 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Dimitri Fedrau <dima.fedrau@...il.com>, netdev@...r.kernel.org,
linux-renesas-soc@...r.kernel.org
Subject: Re: [net-next,v2] net: phy: marvell-88q2xxx: Enable temperature
sensor for mv88q211x
On Fri, Apr 18, 2025 at 04:58:00PM +0200, Niklas Söderlund wrote:
> The temperature sensor enabled for mv88q222x devices also functions for
> mv88q211x based devices. Unify the two devices probe functions to enable
> the sensors for all devices supported by this driver.
>
> The same oddity as for mv88q222x devices exists, the PHY link must be up
> for a correct temperature reading to be reported.
>
> # cat /sys/class/hwmon/hwmon9/temp1_input
> -75000
>
> # ifconfig end5 up
>
> # cat /sys/class/hwmon/hwmon9/temp1_input
> 59000
>
> Worth noting is that while the temperature register offsets and layout
> are the same between mv88q211x and mv88q222x devices their names in the
> datasheets are different. This change keeps the mv88q222x names for the
> mv88q211x support.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> Reviewed-by: Dimitri Fedrau <dima.fedrau@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Andrew
Powered by blists - more mailing lists