netdev - [PATCH net-next] net: stmmac: dwc-qos: calibrate tegra with mdio bus idle

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1u7EYR-001ZAS-Cr@rmk-PC.armlinux.org.uk>
Date: Tue, 22 Apr 2025 15:24:55 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Jon Hunter <jonathanh@...dia.com>,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>,
	Thierry Reding <treding@...dia.com>
Subject: [PATCH net-next] net: stmmac: dwc-qos: calibrate tegra with mdio bus
 idle

Thierry states that there are prerequists for Tegra's calibration
that should be met before starting calibration - both the RGMII and
MDIO interfaces should be idle.

This commit adds the necessary MII bus locking to ensure that the MDIO
interface is idle during calibration.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c  | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index fa900b4991d0..09ae16e026eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -136,10 +136,11 @@ static int dwc_qos_probe(struct platform_device *pdev,
 #define AUTO_CAL_STATUS 0x880c
 #define  AUTO_CAL_STATUS_ACTIVE BIT(31)
 
-static void tegra_eqos_fix_speed(void *priv, int speed, unsigned int mode)
+static void tegra_eqos_fix_speed(void *bsp_priv, int speed, unsigned int mode)
 {
-	struct tegra_eqos *eqos = priv;
+	struct tegra_eqos *eqos = bsp_priv;
 	bool needs_calibration = false;
+	struct stmmac_priv *priv;
 	u32 value;
 	int err;
 
@@ -158,6 +159,11 @@ static void tegra_eqos_fix_speed(void *priv, int speed, unsigned int mode)
 	}
 
 	if (needs_calibration) {
+		priv = netdev_priv(dev_get_drvdata(eqos->dev));
+
+		/* Calibration should be done with the MDIO bus idle */
+		mutex_lock(&priv->mii->mdio_lock);
+
 		/* calibrate */
 		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
 		value |= SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
@@ -191,6 +197,8 @@ static void tegra_eqos_fix_speed(void *priv, int speed, unsigned int mode)
 		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
 		value &= ~SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
 		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
+
+		mutex_unlock(&priv->mii->mdio_lock);
 	} else {
 		value = readl(eqos->regs + AUTO_CAL_CONFIG);
 		value &= ~AUTO_CAL_CONFIG_ENABLE;
-- 
2.30.2