netdev - [PATCH net-next 4/6] net: stmmac: intel: move phy_interface init to tgl_common

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1uASLs-0021Qk-Qt@rmk-PC.armlinux.org.uk>
Date: Thu, 01 May 2025 12:45:16 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH net-next 4/6] net: stmmac: intel: move phy_interface init to
 tgl_common_data()

Move the initialisation of plat->phy_interface to tgl_common_data()
as all callers set this same interface mode. This moves it to a
single location to make the change to get_interfaces() more obvious.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 96c893dd262f..4b263a3c65a4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -929,6 +929,7 @@ static int tgl_common_data(struct pci_dev *pdev,
 	plat->rx_queues_to_use = 6;
 	plat->tx_queues_to_use = 4;
 	plat->clk_ptp_rate = 204800000;
+	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
 	plat->speed_mode_2500 = intel_speed_mode_2500;
 
 	plat->safety_feat_cfg->tsoee = 1;
@@ -948,7 +949,6 @@ static int tgl_sgmii_phy0_data(struct pci_dev *pdev,
 			       struct plat_stmmacenet_data *plat)
 {
 	plat->bus_id = 1;
-	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	return tgl_common_data(pdev, plat);
@@ -962,7 +962,6 @@ static int tgl_sgmii_phy1_data(struct pci_dev *pdev,
 			       struct plat_stmmacenet_data *plat)
 {
 	plat->bus_id = 2;
-	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	return tgl_common_data(pdev, plat);
@@ -976,7 +975,6 @@ static int adls_sgmii_phy0_data(struct pci_dev *pdev,
 				struct plat_stmmacenet_data *plat)
 {
 	plat->bus_id = 1;
-	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
 
 	/* SerDes power up and power down are done in BIOS for ADL */
 
@@ -991,7 +989,6 @@ static int adls_sgmii_phy1_data(struct pci_dev *pdev,
 				struct plat_stmmacenet_data *plat)
 {
 	plat->bus_id = 2;
-	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
 
 	/* SerDes power up and power down are done in BIOS for ADL */
 
-- 
2.30.2