lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250521-ancient-discreet-weasel-98b145-mkl@pengutronix.de>
Date: Wed, 21 May 2025 12:07:07 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Geert Uytterhoeven <geert+renesas@...der.be>
Cc: Oliver Hartkopp <socketcan@...tkopp.net>, 
	Jonathan Corbet <corbet@....net>, Wolfgang Grandegger <wg@...ndegger.com>, 
	"David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Simon Horman <horms@...nel.org>, 
	linux-can@...r.kernel.org, netdev@...r.kernel.org, linux-doc@...r.kernel.org
Subject: Re: [PATCH] documentation: networking: can: Document
 alloc_candev_mqs()

On 21.05.2025 11:51:21, Geert Uytterhoeven wrote:
> Since the introduction of alloc_candev_mqs() and friends, there is no
> longer a need to allocate a generic network device and perform explicit
> CAN-specific setup.  Remove the code showing this setup, and document
> alloc_candev_mqs() instead.

Makes sense.

> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
> ---
> Dunno if this deserves
> Fixes: 39549eef3587f1c1 ("can: CAN Network device driver and Netlink interface")
> 
>  Documentation/networking/can.rst | 9 +++------
>  1 file changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst
> index b018ce346392652b..784dbd19b140d262 100644
> --- a/Documentation/networking/can.rst
> +++ b/Documentation/networking/can.rst
> @@ -1106,13 +1106,10 @@ General Settings
>  
>  .. code-block:: C

This breaks the rst rendering. I think you should remove the "..
code-block:: C"...

>  
> -    dev->type  = ARPHRD_CAN; /* the netdevice hardware type */
> -    dev->flags = IFF_NOARP;  /* CAN has no arp */
> +CAN network device drivers can use alloc_candev_mqs() and friends instead of
> +alloc_netdev_mqs(), to automatically take care of CAN-specific setup:

and add a second ":" after "setup:"

>  
> -    dev->mtu = CAN_MTU; /* sizeof(struct can_frame) -> Classical CAN interface */
> -
> -    or alternative, when the controller supports CAN with flexible data rate:
> -    dev->mtu = CANFD_MTU; /* sizeof(struct canfd_frame) -> CAN FD interface */
> +    dev = alloc_candev_mqs(...);
>  
>  The struct can_frame or struct canfd_frame is the payload of each socket
>  buffer (skbuff) in the protocol family PF_CAN.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ