lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250523154743.545245-1-Frank.Li@nxp.com>
Date: Fri, 23 May 2025 11:47:39 -0400
From: Frank Li <Frank.Li@....com>
To: Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Nicolas Ferre <nicolas.ferre@...rochip.com>,
	Alexandre Belloni <alexandre.belloni@...tlin.com>,
	Claudiu Beznea <claudiu.beznea@...on.dev>,
	netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@...r.kernel.org (open list),
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Microchip (AT91) SoC support)
Cc: imx@...ts.linux.dev
Subject: [PATCH 1/1] dt-bindings: ieee802154: Convert at86rf230.txt yaml format

Convert at86rf230.txt yaml format.

Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Add parent spi node in examples.

Signed-off-by: Frank Li <Frank.Li@....com>
---
 .../bindings/net/ieee802154/at86rf230.txt     | 27 --------
 .../net/ieee802154/atmel,at86rf233.yaml       | 65 +++++++++++++++++++
 2 files changed, 65 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
 create mode 100644 Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml

diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
deleted file mode 100644
index 168f1be509126..0000000000000
--- a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* AT86RF230 IEEE 802.15.4 *
-
-Required properties:
-  - compatible:		should be "atmel,at86rf230", "atmel,at86rf231",
-			"atmel,at86rf233" or "atmel,at86rf212"
-  - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
-			sync or async operation mode
-  - reg:		the chipselect index
-  - interrupts:		the interrupt generated by the device. Non high-level
-			can occur deadlocks while handling isr.
-
-Optional properties:
-  - reset-gpio:		GPIO spec for the rstn pin
-  - sleep-gpio:		GPIO spec for the slp_tr pin
-  - xtal-trim:		u8 value for fine tuning the internal capacitance
-			arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
-
-Example:
-
-	at86rf231@0 {
-		compatible = "atmel,at86rf231";
-		spi-max-frequency = <7500000>;
-		reg = <0>;
-		interrupts = <19 4>;
-		interrupt-parent = <&gpio3>;
-		xtal-trim = /bits/ 8 <0x06>;
-	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml b/Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml
new file mode 100644
index 0000000000000..275e5e4677a46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/atmel,at86rf233.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ieee802154/atmel,at86rf233.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT86RF230 IEEE 802.15.4
+
+maintainers:
+  - Frank Li <Frank.Li@....com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at86rf212
+      - atmel,at86rf230
+      - atmel,at86rf231
+      - atmel,at86rf233
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpio:
+    maxItems: 1
+
+  sleep-gpio:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 7500000
+
+  xtal-trim:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      u8 value for fine tuning the internal capacitance
+      arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        zigbee@0 {
+            compatible = "atmel,at86rf231";
+            reg = <0>;
+            spi-max-frequency = <7500000>;
+            interrupts = <19 4>;
+            interrupt-parent = <&gpio3>;
+            xtal-trim = /bits/ 8 <0x06>;
+        };
+    };
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ