netdev - [PATCH net-next] net: stmmac: improve .set_clk_tx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1uPjjx-0049r5-NN@rmk-PC.armlinux.org.uk>
Date: Thu, 12 Jun 2025 16:21:17 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH net-next] net: stmmac: improve .set_clk_tx_rate() method error
 message

Improve the .set_clk_tx_rate() method error message to include the
PHY interface mode along with the speed, which will be helpful to
the RK implementations.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1369fa70bc58..24a4b82e934b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1062,8 +1062,8 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 						interface, speed);
 		if (ret < 0)
 			netdev_err(priv->dev,
-				   "failed to configure transmit clock for %dMbps: %pe\n",
-				   speed, ERR_PTR(ret));
+				   "failed to configure %s transmit clock for %dMbps: %pe\n",
+				   phy_modes(interface), speed, ERR_PTR(ret));
 	}
 
 	stmmac_mac_set(priv, priv->ioaddr, true);
-- 
2.30.2