Message-ID: <20250612071958.1696361-3-gal@nvidia.com>
Date: Thu, 12 Jun 2025 10:19:58 +0300
From: Gal Pressman <gal@...dia.com>
To: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>, Andrew Lunn <andrew+netdev@...n.ch>,
	<netdev@...r.kernel.org>
CC: Andrew Lunn <andrew@...n.ch>, Simon Horman <horms@...nel.org>, Shuah Khan
	<shuah@...nel.org>, Joe Damato <jdamato@...tly.com>,
	<linux-kselftest@...r.kernel.org>, Gal Pressman <gal@...dia.com>, Nimrod Oren
	<noren@...dia.com>
Subject: [PATCH net v3 2/2] selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context

Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).

The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
  context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
  1.

This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
   additional RSS contexts.

The test was written by AI, and reviewed by humans.

Cc: Jakub Kicinski <kuba@...nel.org>
Reviewed-by: Nimrod Oren <noren@...dia.com>
Signed-off-by: Gal Pressman <gal@...dia.com>
---
 .../selftests/drivers/net/hw/rss_ctx.py       | 59 ++++++++++++++++++-
 1 file changed, 58 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/drivers/net/hw/rss_ctx.py b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
index ca60ae325c22..7bb552f8b182 100755
--- a/tools/testing/selftests/drivers/net/hw/rss_ctx.py
+++ b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
@@ -747,6 +747,62 @@ def test_rss_ntuple_addition(cfg):
                                                           'noise' : (0,) })
 
 
+def test_rss_default_context_rule(cfg):
+    """
+    Allocate a port, direct this port to context 0, then create a new RSS
+    context and steer all TCP traffic to it (context 1).  Verify that:
+      * Traffic to the specific port continues to use queues of the main
+        context (0/1).
+      * Traffic to any other TCP port is redirected to the new context
+        (queues 2/3).
+    """
+
+    require_ntuple(cfg)
+
+    queue_cnt = len(_get_rx_cnts(cfg))
+    if queue_cnt < 4:
+        try:
+            ksft_pr(f"Increasing queue count {queue_cnt} -> 4")
+            ethtool(f"-L {cfg.ifname} combined 4")
+            defer(ethtool, f"-L {cfg.ifname} combined {queue_cnt}")
+        except Exception as exc:
+            raise KsftSkipEx("Not enough queues for the test") from exc
+
+    # Use queues 0 and 1 for the main context
+    ethtool(f"-X {cfg.ifname} equal 2")
+    defer(ethtool, f"-X {cfg.ifname} default")
+
+    # Create a new RSS context that uses queues 2 and 3
+    ctx_id = ethtool_create(cfg, "-X", "context new start 2 equal 2")
+    defer(ethtool, f"-X {cfg.ifname} context {ctx_id} delete")
+
+    # Generic low-priority rule: redirect all TCP traffic to the new context.
+    # Give it an explicit higher location number (lower priority).
+    flow_generic = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} context {ctx_id} loc 1"
+    ethtool(f"-N {cfg.ifname} {flow_generic}")
+    defer(ethtool, f"-N {cfg.ifname} delete 1")
+
+    # Specific high-priority rule for a random port that should stay on context 0.
+    # Assign loc 0 so it is evaluated before the generic rule.
+    port_main = rand_port()
+    flow_main = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port_main} context 0 loc 0"
+    ethtool(f"-N {cfg.ifname} {flow_main}")
+    defer(ethtool, f"-N {cfg.ifname} delete 0")
+
+    _ntuple_rule_check(cfg, 1, ctx_id)
+
+    # Verify that traffic matching the specific rule still goes to queues 0/1
+    _send_traffic_check(cfg, port_main, "context 0",
+                        { 'target': (0, 1),
+                          'empty' : (2, 3) })
+
+    # And that traffic for any other port is steered to the new context
+    port_other = rand_port()
+    _send_traffic_check(cfg, port_other, f"context {ctx_id}",
+                        { 'target': (2, 3),
+                          'noise' : (0, 1) })
+
+
 def main() -> None:
     with NetDrvEpEnv(__file__, nsim_test=False) as cfg:
         cfg.context_cnt = None
@@ -760,7 +816,8 @@ def main() -> None:
                   test_rss_context_overlap, test_rss_context_overlap2,
                   test_rss_context_out_of_order, test_rss_context4_create_with_cfg,
                   test_flow_add_context_missing,
-                  test_delete_rss_context_busy, test_rss_ntuple_addition],
+                  test_delete_rss_context_busy, test_rss_ntuple_addition,
+                  test_rss_default_context_rule],
                  args=(cfg, ))
     ksft_exit()
 
-- 
2.40.1

Powered by blists - more mailing lists