[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250625163453.2567869-1-kamilh@axis.com>
Date: Wed, 25 Jun 2025 18:34:50 +0200
From: Kamil Horák - 2N <kamilh@...s.com>
To: <florian.fainelli@...adcom.com>, <bcm-kernel-feedback-list@...adcom.com>,
<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <kamilh@...s.com>, <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <f.fainelli@...il.com>, <robh@...nel.org>
Subject: [PATCH net-next v3 0/3] net: phy: bcm54811: Fix the PHY initialization
From: "Kamil Horák (2N)" <kamilh@...s.com>
PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for
their two-wire PHYs. It can be used with most Ethernet controllers
under certain limitations (no half-duplex link modes etc.).
PATCH 2 - Add MII-Lite PHY interface type
PATCH 3 - Fix the BCM54811 PHY initialization so that it conforms
to the datasheet regarding a reserved bit in the LRE Control
register, which must be written to zero after every device reset.
Kamil Horák (2N) (3):
net: phy: MII-Lite PHY interface mode
dt-bindings: ethernet-phy: add MII-Lite phy interface type
net: phy: bcm54811: Fix the PHY initialization
.../bindings/net/ethernet-controller.yaml | 1 +
drivers/net/phy/broadcom.c | 30 ++++++++++++++++---
drivers/net/phy/phy-core.c | 1 +
drivers/net/phy/phy_caps.c | 4 +++
drivers/net/phy/phylink.c | 1 +
include/linux/brcmphy.h | 7 +++++
include/linux/phy.h | 4 +++
7 files changed, 44 insertions(+), 4 deletions(-)
--
2.39.5
Powered by blists - more mailing lists