[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <551d7f29-d791-4703-8ce9-dec5baadd383@lunn.ch>
Date: Thu, 26 Jun 2025 10:59:25 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Jonas Rebmann <jre@...gutronix.de>
Cc: Wei Fang <wei.fang@....com>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
Shenwei Wang <shenwei.wang@....com>,
Clark Wang <xiaoning.wang@....com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>
Subject: Re: [PATCH] net: fec: allow disable coalescing
On Thu, Jun 26, 2025 at 10:33:51AM +0200, Jonas Rebmann wrote:
> Hi Andrew,
>
> On 2025-06-26 10:12, Andrew Lunn wrote:
> > On Thu, Jun 26, 2025 at 02:36:37AM +0000, Wei Fang wrote:
> > > >
> > > > - /* Must be greater than zero to avoid unpredictable behavior */
> > > > - if (!fep->rx_time_itr || !fep->rx_pkts_itr ||
> > > > - !fep->tx_time_itr || !fep->tx_pkts_itr)
> > > > - return;
> >
> > Hi Wei
> >
> > When i see a comment like this being removed, i wounder if there is
> > any danger of side effects? Do you know what is being done here is
> > actually safe, for all the different versions of the FEC which support
> > coalescence?
>
> For reference, this comment is taken in plain from section 11.6.4.1.16.3
> in the i.MX 8M Plus Applications Processor Reference Manual (and is the
> same for the 6UL).
>
> I was also worried about this so I made sure that in any case where
> either of those is zero, the coalescing enable bit (FEC_ITR_EN) is
> explicitly disabled.
>
> fec_enet_itr_coal_set is only ever called if FEC_QUIRK_HAS_COALESCE is
> set and for those models, we expect disabling coalescing via FEC_ITR_EN
> -- and consequently also setting the parameters to zero -- to be
> unproblematic. This is also the reset default.
Thanks for the additional details. You could mention this in the
commit message. The commit message allows you to answer reviewers
questions before they ask them...
Andrew
Powered by blists - more mailing lists