[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250630105328-mutt-send-email-mst@kernel.org>
Date: Mon, 30 Jun 2025 10:54:38 -0400
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Zigit Zo <zuozhijie@...edance.com>
Cc: jasowang@...hat.com, xuanzhuo@...ux.alibaba.com, eperezma@...hat.com,
virtualization@...ts.linux.dev, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net] virtio-net: fix a rtnl_lock() deadlock during probing
On Mon, Jun 30, 2025 at 10:50:55AM -0400, Michael S. Tsirkin wrote:
> On Mon, Jun 30, 2025 at 05:51:09PM +0800, Zigit Zo wrote:
> > This bug happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while
> > the virtio-net driver is still probing with rtnl_lock() hold, this will
> > cause a recursive mutex in netdev_notify_peers().
> >
> > Fix it by skip acking the annouce in virtnet_config_changed_work() when
> > probing. The annouce will still get done when ndo_open() enables the
> > virtio_config_driver_enable().
>
> I am not so sure it will be - while driver is not loaded, device does
> not have to send interrupts, and there's no rule I'm aware of that says
> we'll get one after DRIVER_OK.
>
> How about, we instead just schedule the work to do it later?
>
>
> Also, there is another bug here.
> If ndo_open did not run, we actually should not send any announcements.
>
> Do we care if carrier on is set on probe or on open?
> If not, let's just defer this to ndo_open?
Hmm yes I think we do, device is visible to userspace is it not?
Hmm. We can keep the announce bit set in vi->status and on open, check
it and then schedule a work to do the announcement.
>
> > We've observed a softlockup with Ubuntu 24.04, and can be reproduced with
> > QEMU sending the announce_self rapidly while booting.
> >
> > [ 494.167473] INFO: task swapper/0:1 blocked for more than 368 seconds.
> > [ 494.167667] Not tainted 6.8.0-57-generic #59-Ubuntu
> > [ 494.167810] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > [ 494.168015] task:swapper/0 state:D stack:0 pid:1 tgid:1 ppid:0 flags:0x00004000
> > [ 494.168260] Call Trace:
> > [ 494.168329] <TASK>
> > [ 494.168389] __schedule+0x27c/0x6b0
> > [ 494.168495] schedule+0x33/0x110
> > [ 494.168585] schedule_preempt_disabled+0x15/0x30
> > [ 494.168709] __mutex_lock.constprop.0+0x42f/0x740
> > [ 494.168835] __mutex_lock_slowpath+0x13/0x20
> > [ 494.168949] mutex_lock+0x3c/0x50
> > [ 494.169039] rtnl_lock+0x15/0x20
> > [ 494.169128] netdev_notify_peers+0x12/0x30
> > [ 494.169240] virtnet_config_changed_work+0x152/0x1a0
> > [ 494.169377] virtnet_probe+0xa48/0xe00
> > [ 494.169484] ? vp_get+0x4d/0x100
> > [ 494.169574] virtio_dev_probe+0x1e9/0x310
> > [ 494.169682] really_probe+0x1c7/0x410
> > [ 494.169783] __driver_probe_device+0x8c/0x180
> > [ 494.169901] driver_probe_device+0x24/0xd0
> > [ 494.170011] __driver_attach+0x10b/0x210
> > [ 494.170117] ? __pfx___driver_attach+0x10/0x10
> > [ 494.170237] bus_for_each_dev+0x8d/0xf0
> > [ 494.170341] driver_attach+0x1e/0x30
> > [ 494.170440] bus_add_driver+0x14e/0x290
> > [ 494.170548] driver_register+0x5e/0x130
> > [ 494.170651] ? __pfx_virtio_net_driver_init+0x10/0x10
> > [ 494.170788] register_virtio_driver+0x20/0x40
> > [ 494.170905] virtio_net_driver_init+0x97/0xb0
> > [ 494.171022] do_one_initcall+0x5e/0x340
> > [ 494.171128] do_initcalls+0x107/0x230
> > [ 494.171228] ? __pfx_kernel_init+0x10/0x10
> > [ 494.171340] kernel_init_freeable+0x134/0x210
> > [ 494.171462] kernel_init+0x1b/0x200
> > [ 494.171560] ret_from_fork+0x47/0x70
> > [ 494.171659] ? __pfx_kernel_init+0x10/0x10
> > [ 494.171769] ret_from_fork_asm+0x1b/0x30
> > [ 494.171875] </TASK>
> >
> > Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down")
> > Signed-off-by: Zigit Zo <zuozhijie@...edance.com>
> > ---
> > drivers/net/virtio_net.c | 15 ++++++++++++---
> > 1 file changed, 12 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index e53ba600605a..0290d289ebee 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -6211,7 +6211,8 @@ static const struct net_device_ops virtnet_netdev = {
> > .ndo_tx_timeout = virtnet_tx_timeout,
> > };
> >
> > -static void virtnet_config_changed_work(struct work_struct *work)
> > +static void __virtnet_config_changed_work(struct work_struct *work,
> > + bool check_announce)
> > {
> > struct virtnet_info *vi =
> > container_of(work, struct virtnet_info, config_work);
>
> So this will be schedule_announce instead of check_announce?
>
>
>
>
> > @@ -6221,7 +6222,7 @@ static void virtnet_config_changed_work(struct work_struct *work)
> > struct virtio_net_config, status, &v) < 0)
> > return;
> >
> > - if (v & VIRTIO_NET_S_ANNOUNCE) {
> > + if (check_announce && (v & VIRTIO_NET_S_ANNOUNCE)) {
> > netdev_notify_peers(vi->dev);
> > virtnet_ack_link_announce(vi);
> > }
> > @@ -6244,6 +6245,11 @@ static void virtnet_config_changed_work(struct work_struct *work)
> > }
> > }
> >
> > +static void virtnet_config_changed_work(struct work_struct *work)
> > +{
> > + __virtnet_config_changed_work(work, true);
> > +}
> > +
> > static void virtnet_config_changed(struct virtio_device *vdev)
> > {
> > struct virtnet_info *vi = vdev->priv;
> > @@ -7030,7 +7036,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> > otherwise get link status from config. */
> > netif_carrier_off(dev);
> > if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> > - virtnet_config_changed_work(&vi->config_work);
> > + /* The check_annouce work will get scheduled when ndo_open()
> > + * doing the virtio_config_driver_enable().
> > + */
> > + __virtnet_config_changed_work(&vi->config_work, false);
> > } else {
> > vi->status = VIRTIO_NET_S_LINK_UP;
> > virtnet_update_settings(vi);
> >
> > base-commit: 2def09ead4ad5907988b655d1e1454003aaf8297
> > --
> > 2.49.0
Powered by blists - more mailing lists