[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <465b60e7-fe68-407c-add4-856178f4cb7c@oss.qualcomm.com>
Date: Mon, 14 Jul 2025 10:28:00 +0800
From: Yijie Yang <yijie.yang@....qualcomm.com>
To: Yijie Yang <quic_yijiyang@...cinc.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller"
<davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Richard Cochran <richardcochran@...il.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 0/4] Enable ethernet on qcs615
On 2025-01-21 15:54, Yijie Yang wrote:
> Correct the definition and usage of phy-mode in both the DT binding and
> driver code.
> Add dts nodes and EMAC driver data to enable ethernet interface on
> qcs615-ride platform.
> The EMAC version currently in use on this platform is the same as that in
> qcs404. The EPHY model is Micrel KSZ9031.
>
> Signed-off-by: Yijie Yang <quic_yijiyang@...cinc.com>
> ---
> Changes in v3:
> - Correct the definition of 'rgmii' in ethernet-controller.yaml.
> - Remove the redundant max-speed limit in the dts file.
> - Update the definition of 'rgmii' to prevent any further misunderstandings.
> - Update the phy-mode in the dts file from rgmii to rgmii-id.
> - Mask the PHY mode passed to the driver to allow the MAC to add the delay.
> - Update the low power mode exit interrupt from 662 to 661.
> - Update the compatible string to fallback to qcs404 since they share the same hardware.
> - Update base commit to next-20250120.
> - Link to v2: https://lore.kernel.org/r/20241118-dts_qcs615-v2-0-e62b924a3cbd@quicinc.com
>
> ---
> Yijie Yang (4):
> dt-bindings: net: ethernet-controller: Correct the definition of phy-mode
> net: stmmac: dwmac-qcom-ethqos: Mask PHY mode if configured with rgmii-id
> arm64: dts: qcom: qcs615: add ethernet node
> arm64: dts: qcom: qcs615-ride: Enable ethernet node
>
> .../bindings/net/ethernet-controller.yaml | 2 +-
> arch/arm64/boot/dts/qcom/qcs615-ride.dts | 104 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/qcs615.dtsi | 34 +++++++
> .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 18 +++-
> 4 files changed, 152 insertions(+), 6 deletions(-)
> ---
> base-commit: 9424d9acada6461344c71ac02f2f3fbcdd775498
> change-id: 20241224-dts_qcs615-9612efea02cb
> prerequisite-message-id: <20250120-schema_qcs615-v4-1-d9d122f89e64@...cinc.com>
> prerequisite-patch-id: b97f36116c87036abe66e061db82588eb1bbaa9a
>
> Best regards,
Since my last submission, I’ve been working on an updated version of the
patch that incorporates the feedback received and improves the overall
implementation. I plan to submit the revised version shortly.
Please let me know if there are any additional concerns or changes in
direction I should be aware of. I’d really appreciate any guidance to
ensure the patch aligns well with the current goals of the subsystem.
--
Best Regards,
Yijie
Powered by blists - more mailing lists