[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250729115009.2158019-1-amadeus@jmu.edu.cn>
Date: Tue, 29 Jul 2025 19:50:09 +0800
From: Chukun Pan <amadeus@....edu.cn>
To: jonas@...boo.se
Cc: alsi@...g-olufsen.dk,
amadeus@....edu.cn,
andrew@...n.ch,
conor+dt@...nel.org,
davem@...emloft.net,
devicetree@...r.kernel.org,
edumazet@...gle.com,
heiko@...ech.de,
krzk+dt@...nel.org,
kuba@...nel.org,
linus.walleij@...aro.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
netdev@...r.kernel.org,
olteanv@...il.com,
pabeni@...hat.com,
robh@...nel.org,
ziyao@...root.org
Subject: Re: [PATCH 3/3] arm64: dts: rockchip: Add RTL8367RB-VB switch to Radxa E24C
Hi,
> The issue is with TSO and RX checksum offload, with those disabled on
> the conduit interface (gmac1/eth0) my issues disappeared.
I did a test today and the same problem occurred when running the new
kernel on my rk3568 + rtl8367s board. This problem does not exist on
older kernels (6.1 and 6.6). Not sure where the problem is.
> With a 'mdio' child node 'make CHECK_DTBS=y' report something like:
>
> rockchip/rk3528-radxa-e24c.dtb: ethernet-switch@1d (realtek,rtl8365mb): mdio: False schema does not allow { [snip] }
> from schema $id: http://devicetree.org/schemas/net/dsa/realtek.yaml#
>
> With a mdio node the driver is happy and dtschema is sad, and without
> the mdio node it was the other way around.
On older kernels (6.1/6.6) only realtek-smi requires mdio child OF node.
Commit bba140a566ed ("net: dsa: realtek: use the same mii bus driver for both interfaces")
changed this behavior, both MDIO interface and SMI interface need it
(rtl83xx_setup_user_mdio), but the dt-bindings has not been updated.
I think this needs a Fixes tag.
Thanks,
Chukun
--
2.25.1
Powered by blists - more mailing lists