[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250808151822.536879-16-arnd@kernel.org>
Date: Fri, 8 Aug 2025 17:17:59 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: Bartosz Golaszewski <brgl@...ev.pl>,
Linus Walleij <linus.walleij@...aro.org>,
linux-gpio@...r.kernel.org,
Florian Fainelli <florian.fainelli@...adcom.com>,
Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Arnd Bergmann <arnd@...db.de>,
Jonas Gorski <jonas.gorski@...il.com>,
Álvaro Fernández Rojas <noltari@...il.com>,
Kyle Hendry <kylehendrydev@...il.com>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 15/21] dsa: b53: hide legacy gpiolib usage on non-mips
From: Arnd Bergmann <arnd@...db.de>
The MIPS bcm53xx platform still uses the legacy gpiolib interfaces based
on gpio numbers, but other platforms do not.
Hide these interfaces inside of the existing #ifdef block and use the
modern interfaces in the common parts of the driver to allow building
it when the gpio_set_value() is left out of the kernel.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/net/dsa/b53/b53_common.c | 17 +++++------------
drivers/net/dsa/b53/b53_priv.h | 24 ++++++++++++++++++------
2 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 9942fb6f7f4b..cb57bcc56c63 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -19,7 +19,7 @@
#include <linux/delay.h>
#include <linux/export.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/math.h>
#include <linux/minmax.h>
@@ -948,17 +948,17 @@ EXPORT_SYMBOL(b53_configure_vlan);
static void b53_switch_reset_gpio(struct b53_device *dev)
{
- int gpio = dev->reset_gpio;
+ struct gpio_desc *gpio = dev->reset_gpio;
- if (gpio < 0)
+ if (IS_ERR(gpio))
return;
/* Reset sequence: RESET low(50ms)->high(20ms)
*/
- gpio_set_value(gpio, 0);
+ gpiod_set_value(gpio, 0);
mdelay(50);
- gpio_set_value(gpio, 1);
+ gpiod_set_value(gpio, 1);
mdelay(20);
dev->current_page = 0xff;
@@ -2925,7 +2925,6 @@ static int b53_switch_init(struct b53_device *dev)
{
u32 chip_id = dev->chip_id;
unsigned int i;
- int ret;
if (is63xx(dev))
chip_id = BCM63XX_DEVICE_ID;
@@ -3005,12 +3004,6 @@ static int b53_switch_init(struct b53_device *dev)
return -ENOMEM;
dev->reset_gpio = b53_switch_get_reset_gpio(dev);
- if (dev->reset_gpio >= 0) {
- ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
- GPIOF_OUT_INIT_HIGH, "robo_reset");
- if (ret)
- return ret;
- }
return 0;
}
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 458775f95164..16e82653a7c6 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -136,7 +136,7 @@ struct b53_device {
u8 duplex_reg;
u8 jumbo_pm_reg;
u8 jumbo_size_reg;
- int reset_gpio;
+ struct gpio_desc *reset_gpio;
u8 num_arl_bins;
u16 num_arl_buckets;
enum dsa_tag_protocol tag_protocol;
@@ -375,22 +375,34 @@ static inline void b53_arl_from_entry_25(u64 *mac_vid,
#include <linux/bcm47xx_nvram.h>
#include <bcm47xx_board.h>
-static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+static inline gpio_desc *b53_switch_get_reset_gpio(struct b53_device *dev)
{
enum bcm47xx_board board = bcm47xx_board_get();
+ int gpio, ret;
switch (board) {
case BCM47XX_BOARD_LINKSYS_WRT300NV11:
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- return 8;
+ gpio = 8;
+ break;
default:
- return bcm47xx_nvram_gpio_pin("robo_reset");
+ gpio = bcm47xx_nvram_gpio_pin("robo_reset");
}
+
+ if (!gpio_is_valid(gpio))
+ return ERR_PTR(-EINVAL);
+
+ ret = devm_gpiod_request_one(dev->dev, gpio,
+ GPIOF_OUT_INIT_HIGH, "robo_reset");
+ if (ret)
+ return ERR_PTR(ret);
+
+ return gpio_to_desc(gpio);
}
#else
-static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+static inline struct gpio_desc *b53_switch_get_reset_gpio(struct b53_device *dev)
{
- return -ENOENT;
+ return ERR_PTR(-ENODEV);
}
#endif
--
2.39.5
Powered by blists - more mailing lists