netdev - [PATCH net-next 9/9] net: stmmac: mediatek: convert to resume() method

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1ulXcC-008grN-Hc@rmk-PC.armlinux.org.uk>
Date: Mon, 11 Aug 2025 19:51:24 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Matthias Brugger <matthias.bgg@...il.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH net-next 9/9] net: stmmac: mediatek: convert to resume()
 method

Convert mediatek to use the resume() platform method rather than the
init() platform method as mediatek_dwmac_init() is only called from
the resume paths.

This will ensure that in a future commit, mediatek_dwmac_init() won't
be called when probing the main part of the stmmac driver.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index 39421d6a34e4..f1b36f0a401d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -523,7 +523,7 @@ static int mediatek_dwmac_clk_init(struct mediatek_dwmac_plat_data *plat)
 	return ret;
 }
 
-static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
+static int mediatek_dwmac_init(struct device *dev, void *priv)
 {
 	struct mediatek_dwmac_plat_data *plat = priv;
 	const struct mediatek_dwmac_variant *variant = plat->variant;
@@ -532,7 +532,7 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
 	if (variant->dwmac_set_phy_interface) {
 		ret = variant->dwmac_set_phy_interface(plat);
 		if (ret) {
-			dev_err(plat->dev, "failed to set phy interface, err = %d\n", ret);
+			dev_err(dev, "failed to set phy interface, err = %d\n", ret);
 			return ret;
 		}
 	}
@@ -540,7 +540,7 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
 	if (variant->dwmac_set_delay) {
 		ret = variant->dwmac_set_delay(plat);
 		if (ret) {
-			dev_err(plat->dev, "failed to set delay value, err = %d\n", ret);
+			dev_err(dev, "failed to set delay value, err = %d\n", ret);
 			return ret;
 		}
 	}
@@ -589,7 +589,7 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev,
 	plat->maxmtu = ETH_DATA_LEN;
 	plat->host_dma_width = priv_plat->variant->dma_bit_mask;
 	plat->bsp_priv = priv_plat;
-	plat->init = mediatek_dwmac_init;
+	plat->resume = mediatek_dwmac_init;
 	plat->clks_config = mediatek_dwmac_clks_config;
 
 	plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
@@ -654,7 +654,7 @@ static int mediatek_dwmac_probe(struct platform_device *pdev)
 		return PTR_ERR(plat_dat);
 
 	mediatek_dwmac_common_data(pdev, plat_dat, priv_plat);
-	mediatek_dwmac_init(pdev, priv_plat);
+	mediatek_dwmac_init(&pdev->dev, priv_plat);
 
 	ret = mediatek_dwmac_clks_config(priv_plat, true);
 	if (ret)
-- 
2.30.2