| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aKDhUxdsK3XkPhSZ@pidgin.makrotopia.org>
Date: Sat, 16 Aug 2025 20:51:47 +0100
From: Daniel Golle <daniel@...rotopia.org>
To: Andrew Lunn <andrew@...n.ch>, Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Hauke Mehrtens <hauke@...ke-m.de>, Simon Horman <horms@...nel.org>,
Russell King <linux@...linux.org.uk>,
Florian Fainelli <f.fainelli@...il.com>,
Arkadi Sharshevsky <arkadis@...lanox.com>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Cc: Andreas Schirm <andreas.schirm@...mens.com>,
Lukas Stockmann <lukas.stockmann@...mens.com>,
Alexander Sverdlin <alexander.sverdlin@...mens.com>,
Peter Christen <peter.christen@...mens.com>,
Avinash Jayaraman <ajayaraman@...linear.com>,
Bing tao Xu <bxu@...linear.com>, Liang Xu <lxu@...linear.com>,
Juraj Povazanec <jpovazanec@...linear.com>,
"Fanni (Fang-Yi) Chan" <fchan@...linear.com>,
"Benny (Ying-Tsan) Weng" <yweng@...linear.com>,
"Livia M. Rosu" <lrosu@...linear.com>,
John Crispin <john@...ozen.org>
Subject: [PATCH RFC net-next 04/23] net: dsa: lantiq_gswip: move definitions
to header
Introduce header file and move register definitions as well as the
defintions struct gswip_hw_info and struct gswip_priv there.
Signed-off-by: Daniel Golle <daniel@...rotopia.org>
---
drivers/net/dsa/lantiq_gswip.c | 251 +-------------------------------
drivers/net/dsa/lantiq_gswip.h | 253 +++++++++++++++++++++++++++++++++
2 files changed, 256 insertions(+), 248 deletions(-)
create mode 100644 drivers/net/dsa/lantiq_gswip.h
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 001790292f6f..5a8fb358fb59 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -27,7 +27,9 @@
* between all LAN ports by default.
*/
-#include <linux/clk.h>
+#include "lantiq_gswip.h"
+#include "lantiq_pce.h"
+
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
@@ -41,260 +43,13 @@
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/phylink.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-#include <net/dsa.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-#include "lantiq_pce.h"
-
-/* GSWIP MDIO Registers */
-#define GSWIP_MDIO_GLOB 0x00
-#define GSWIP_MDIO_GLOB_ENABLE BIT(15)
-#define GSWIP_MDIO_CTRL 0x08
-#define GSWIP_MDIO_CTRL_BUSY BIT(12)
-#define GSWIP_MDIO_CTRL_RD BIT(11)
-#define GSWIP_MDIO_CTRL_WR BIT(10)
-#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f
-#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5
-#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f
-#define GSWIP_MDIO_READ 0x09
-#define GSWIP_MDIO_WRITE 0x0A
-#define GSWIP_MDIO_MDC_CFG0 0x0B
-#define GSWIP_MDIO_MDC_CFG1 0x0C
-#define GSWIP_MDIO_PHYp(p) (0x15 - (p))
-#define GSWIP_MDIO_PHY_LINK_MASK 0x6000
-#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000
-#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000
-#define GSWIP_MDIO_PHY_LINK_UP 0x2000
-#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800
-#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800
-#define GSWIP_MDIO_PHY_SPEED_M10 0x0000
-#define GSWIP_MDIO_PHY_SPEED_M100 0x0800
-#define GSWIP_MDIO_PHY_SPEED_G1 0x1000
-#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600
-#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000
-#define GSWIP_MDIO_PHY_FDUP_EN 0x0200
-#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600
-#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180
-#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000
-#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100
-#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180
-#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060
-#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000
-#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020
-#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060
-#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f
-#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \
- GSWIP_MDIO_PHY_FCONRX_MASK | \
- GSWIP_MDIO_PHY_FCONTX_MASK | \
- GSWIP_MDIO_PHY_LINK_MASK | \
- GSWIP_MDIO_PHY_SPEED_MASK | \
- GSWIP_MDIO_PHY_FDUP_MASK)
-
-/* GSWIP MII Registers */
-#define GSWIP_MII_CFGp(p) (0x2 * (p))
-#define GSWIP_MII_CFG_RESET BIT(15)
-#define GSWIP_MII_CFG_EN BIT(14)
-#define GSWIP_MII_CFG_ISOLATE BIT(13)
-#define GSWIP_MII_CFG_LDCLKDIS BIT(12)
-#define GSWIP_MII_CFG_RGMII_IBS BIT(8)
-#define GSWIP_MII_CFG_RMII_CLK BIT(7)
-#define GSWIP_MII_CFG_MODE_MIIP 0x0
-#define GSWIP_MII_CFG_MODE_MIIM 0x1
-#define GSWIP_MII_CFG_MODE_RMIIP 0x2
-#define GSWIP_MII_CFG_MODE_RMIIM 0x3
-#define GSWIP_MII_CFG_MODE_RGMII 0x4
-#define GSWIP_MII_CFG_MODE_GMII 0x9
-#define GSWIP_MII_CFG_MODE_MASK 0xf
-#define GSWIP_MII_CFG_RATE_M2P5 0x00
-#define GSWIP_MII_CFG_RATE_M25 0x10
-#define GSWIP_MII_CFG_RATE_M125 0x20
-#define GSWIP_MII_CFG_RATE_M50 0x30
-#define GSWIP_MII_CFG_RATE_AUTO 0x40
-#define GSWIP_MII_CFG_RATE_MASK 0x70
-#define GSWIP_MII_PCDU0 0x01
-#define GSWIP_MII_PCDU1 0x03
-#define GSWIP_MII_PCDU5 0x05
-#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0)
-#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7)
-
-/* GSWIP Core Registers */
-#define GSWIP_SWRES 0x000
-#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */
-#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */
-#define GSWIP_VERSION 0x013
-#define GSWIP_VERSION_REV_SHIFT 0
-#define GSWIP_VERSION_REV_MASK GENMASK(7, 0)
-#define GSWIP_VERSION_MOD_SHIFT 8
-#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8)
-#define GSWIP_VERSION_2_0 0x100
-#define GSWIP_VERSION_2_1 0x021
-#define GSWIP_VERSION_2_2 0x122
-#define GSWIP_VERSION_2_2_ETC 0x022
-
-#define GSWIP_BM_RAM_VAL(x) (0x043 - (x))
-#define GSWIP_BM_RAM_ADDR 0x044
-#define GSWIP_BM_RAM_CTRL 0x045
-#define GSWIP_BM_RAM_CTRL_BAS BIT(15)
-#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5)
-#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0)
-#define GSWIP_BM_QUEUE_GCTRL 0x04A
-#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10)
-/* buffer management Port Configuration Register */
-#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2))
-#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */
-#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */
-/* buffer management Port Control Register */
-#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2))
-#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */
-#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */
-
-/* PCE */
-#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x))
-#define GSWIP_PCE_TBL_MASK 0x448
-#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x))
-#define GSWIP_PCE_TBL_ADDR 0x44E
-#define GSWIP_PCE_TBL_CTRL 0x44F
-#define GSWIP_PCE_TBL_CTRL_BAS BIT(15)
-#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13)
-#define GSWIP_PCE_TBL_CTRL_VLD BIT(12)
-#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11)
-#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7)
-#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5)
-#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00
-#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20
-#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40
-#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60
-#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0)
-#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */
-#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */
-#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */
-#define GSWIP_PCE_GCTRL_0 0x456
-#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */
-#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3)
-#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */
-#define GSWIP_PCE_GCTRL_1 0x457
-#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */
-#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */
-#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA))
-#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */
-#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */
-#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */
-#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0
-#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1
-#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2
-#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3
-#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7
-#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0)
-#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA))
-#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */
-#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */
-#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */
-#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */
-#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */
-#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA))
-
-#define GSWIP_MAC_FLEN 0x8C5
-#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC))
-#define GSWIP_MAC_CTRL_0_PADEN BIT(8)
-#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7)
-#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070
-#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000
-#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010
-#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020
-#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030
-#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040
-#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C
-#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000
-#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004
-#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C
-#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003
-#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000
-#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001
-#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002
-#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
-#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */
-#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */
-
-/* Ethernet Switch Fetch DMA Port Control Register */
-#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6))
-#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */
-#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */
-#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */
-#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */
-#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
-#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
-#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
-#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
-
-/* Ethernet Switch Store DMA Port Control Register */
-#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6))
-#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */
-#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */
-#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */
-
-#define GSWIP_TABLE_ACTIVE_VLAN 0x01
-#define GSWIP_TABLE_VLAN_MAPPING 0x02
-#define GSWIP_TABLE_MAC_BRIDGE 0x0b
-#define GSWIP_TABLE_MAC_BRIDGE_KEY3_FID GENMASK(5, 0) /* Filtering identifier */
-#define GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT GENMASK(7, 4) /* Port on learned entries */
-#define GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC BIT(0) /* Static, non-aging entry */
-#define GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID BIT(1) /* Valid bit */
-
-#define XRX200_GPHY_FW_ALIGN (16 * 1024)
-
-/* Maximum packet size supported by the switch. In theory this should be 10240,
- * but long packets currently cause lock-ups with an MTU of over 2526. Medium
- * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP
- * over 2526), hence an MTU value of 2400 seems safe. This issue only affects
- * packet reception. This is probably caused by the PPA engine, which is on the
- * RX part of the device. Packet transmission works properly up to 10240.
- */
-#define GSWIP_MAX_PACKET_LENGTH 2400
-
-struct gswip_hw_info {
- int max_ports;
- unsigned int allowed_cpu_ports;
- void (*phylink_get_caps)(struct dsa_switch *ds, int port,
- struct phylink_config *config);
-};
-
struct xway_gphy_match_data {
char *fe_firmware_name;
char *ge_firmware_name;
};
-struct gswip_gphy_fw {
- struct clk *clk_gate;
- struct reset_control *reset;
- u32 fw_addr_offset;
- char *fw_name;
-};
-
-struct gswip_vlan {
- struct net_device *bridge;
- u16 vid;
- u8 fid;
-};
-
-struct gswip_priv {
- __iomem void *gswip;
- __iomem void *mdio;
- __iomem void *mii;
- const struct gswip_hw_info *hw_info;
- const struct xway_gphy_match_data *gphy_fw_name_cfg;
- struct dsa_switch *ds;
- struct device *dev;
- struct regmap *rcu_regmap;
- struct gswip_vlan vlans[64];
- int num_gphy_fw;
- struct gswip_gphy_fw *gphy_fw;
- u32 port_vlan_filter;
- struct mutex pce_table_lock;
-};
-
struct gswip_pce_table_entry {
u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index
u16 table; // PCE_TBL_CTRL.ADDR = pData->table
diff --git a/drivers/net/dsa/lantiq_gswip.h b/drivers/net/dsa/lantiq_gswip.h
new file mode 100644
index 000000000000..c90ddf89d0d7
--- /dev/null
+++ b/drivers/net/dsa/lantiq_gswip.h
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __LANTIQ_GSWIP_H
+#define __LANTIQ_GSWIP_H
+
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
+
+/* GSWIP MDIO Registers */
+#define GSWIP_MDIO_GLOB 0x00
+#define GSWIP_MDIO_GLOB_ENABLE BIT(15)
+#define GSWIP_MDIO_CTRL 0x08
+#define GSWIP_MDIO_CTRL_BUSY BIT(12)
+#define GSWIP_MDIO_CTRL_RD BIT(11)
+#define GSWIP_MDIO_CTRL_WR BIT(10)
+#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f
+#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5
+#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f
+#define GSWIP_MDIO_READ 0x09
+#define GSWIP_MDIO_WRITE 0x0A
+#define GSWIP_MDIO_MDC_CFG0 0x0B
+#define GSWIP_MDIO_MDC_CFG1 0x0C
+#define GSWIP_MDIO_PHYp(p) (0x15 - (p))
+#define GSWIP_MDIO_PHY_LINK_MASK 0x6000
+#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000
+#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000
+#define GSWIP_MDIO_PHY_LINK_UP 0x2000
+#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800
+#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800
+#define GSWIP_MDIO_PHY_SPEED_M10 0x0000
+#define GSWIP_MDIO_PHY_SPEED_M100 0x0800
+#define GSWIP_MDIO_PHY_SPEED_G1 0x1000
+#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600
+#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FDUP_EN 0x0200
+#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600
+#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180
+#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100
+#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180
+#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060
+#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020
+#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060
+#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f
+#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \
+ GSWIP_MDIO_PHY_FCONRX_MASK | \
+ GSWIP_MDIO_PHY_FCONTX_MASK | \
+ GSWIP_MDIO_PHY_LINK_MASK | \
+ GSWIP_MDIO_PHY_SPEED_MASK | \
+ GSWIP_MDIO_PHY_FDUP_MASK)
+
+/* GSWIP MII Registers */
+#define GSWIP_MII_CFGp(p) (0x2 * (p))
+#define GSWIP_MII_CFG_RESET BIT(15)
+#define GSWIP_MII_CFG_EN BIT(14)
+#define GSWIP_MII_CFG_ISOLATE BIT(13)
+#define GSWIP_MII_CFG_LDCLKDIS BIT(12)
+#define GSWIP_MII_CFG_RGMII_IBS BIT(8)
+#define GSWIP_MII_CFG_RMII_CLK BIT(7)
+#define GSWIP_MII_CFG_MODE_MIIP 0x0
+#define GSWIP_MII_CFG_MODE_MIIM 0x1
+#define GSWIP_MII_CFG_MODE_RMIIP 0x2
+#define GSWIP_MII_CFG_MODE_RMIIM 0x3
+#define GSWIP_MII_CFG_MODE_RGMII 0x4
+#define GSWIP_MII_CFG_MODE_GMII 0x9
+#define GSWIP_MII_CFG_MODE_MASK 0xf
+#define GSWIP_MII_CFG_RATE_M2P5 0x00
+#define GSWIP_MII_CFG_RATE_M25 0x10
+#define GSWIP_MII_CFG_RATE_M125 0x20
+#define GSWIP_MII_CFG_RATE_M50 0x30
+#define GSWIP_MII_CFG_RATE_AUTO 0x40
+#define GSWIP_MII_CFG_RATE_MASK 0x70
+#define GSWIP_MII_PCDU0 0x01
+#define GSWIP_MII_PCDU1 0x03
+#define GSWIP_MII_PCDU5 0x05
+#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0)
+#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7)
+
+/* GSWIP Core Registers */
+#define GSWIP_SWRES 0x000
+#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */
+#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */
+#define GSWIP_VERSION 0x013
+#define GSWIP_VERSION_REV_SHIFT 0
+#define GSWIP_VERSION_REV_MASK GENMASK(7, 0)
+#define GSWIP_VERSION_MOD_SHIFT 8
+#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8)
+#define GSWIP_VERSION_2_0 0x100
+#define GSWIP_VERSION_2_1 0x021
+#define GSWIP_VERSION_2_2 0x122
+#define GSWIP_VERSION_2_2_ETC 0x022
+
+#define GSWIP_BM_RAM_VAL(x) (0x043 - (x))
+#define GSWIP_BM_RAM_ADDR 0x044
+#define GSWIP_BM_RAM_CTRL 0x045
+#define GSWIP_BM_RAM_CTRL_BAS BIT(15)
+#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5)
+#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0)
+#define GSWIP_BM_QUEUE_GCTRL 0x04A
+#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10)
+/* buffer management Port Configuration Register */
+#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2))
+#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */
+#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */
+/* buffer management Port Control Register */
+#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2))
+#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */
+#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */
+
+/* PCE */
+#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x))
+#define GSWIP_PCE_TBL_MASK 0x448
+#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x))
+#define GSWIP_PCE_TBL_ADDR 0x44E
+#define GSWIP_PCE_TBL_CTRL 0x44F
+#define GSWIP_PCE_TBL_CTRL_BAS BIT(15)
+#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13)
+#define GSWIP_PCE_TBL_CTRL_VLD BIT(12)
+#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11)
+#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7)
+#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5)
+#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00
+#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20
+#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40
+#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60
+#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0)
+#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */
+#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */
+#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */
+#define GSWIP_PCE_GCTRL_0 0x456
+#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */
+#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3)
+#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */
+#define GSWIP_PCE_GCTRL_1 0x457
+#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */
+#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */
+#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA))
+#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */
+#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */
+#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */
+#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0
+#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1
+#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2
+#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3
+#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7
+#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0)
+#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA))
+#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */
+#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */
+#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */
+#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */
+#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */
+#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA))
+
+#define GSWIP_MAC_FLEN 0x8C5
+#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_0_PADEN BIT(8)
+#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7)
+#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070
+#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010
+#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020
+#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030
+#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040
+#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C
+#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004
+#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C
+#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003
+#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000
+#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001
+#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002
+#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */
+#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */
+
+/* Ethernet Switch Fetch DMA Port Control Register */
+#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6))
+#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */
+#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */
+#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */
+#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */
+#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+
+/* Ethernet Switch Store DMA Port Control Register */
+#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6))
+#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */
+#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */
+#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */
+
+#define GSWIP_TABLE_ACTIVE_VLAN 0x01
+#define GSWIP_TABLE_VLAN_MAPPING 0x02
+#define GSWIP_TABLE_MAC_BRIDGE 0x0b
+#define GSWIP_TABLE_MAC_BRIDGE_KEY3_FID GENMASK(5, 0) /* Filtering identifier */
+#define GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT GENMASK(7, 4) /* Port on learned entries */
+#define GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC BIT(0) /* Static, non-aging entry */
+#define GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID BIT(1) /* Valid bit */
+
+#define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+/* Maximum packet size supported by the switch. In theory this should be 10240,
+ * but long packets currently cause lock-ups with an MTU of over 2526. Medium
+ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP
+ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects
+ * packet reception. This is probably caused by the PPA engine, which is on the
+ * RX part of the device. Packet transmission works properly up to 10240.
+ */
+#define GSWIP_MAX_PACKET_LENGTH 2400
+
+struct gswip_hw_info {
+ int max_ports;
+ unsigned int allowed_cpu_ports;
+ void (*phylink_get_caps)(struct dsa_switch *ds, int port,
+ struct phylink_config *config);
+};
+
+struct gswip_gphy_fw {
+ struct clk *clk_gate;
+ struct reset_control *reset;
+ u32 fw_addr_offset;
+ char *fw_name;
+};
+
+struct gswip_vlan {
+ struct net_device *bridge;
+ u16 vid;
+ u8 fid;
+};
+
+struct gswip_priv {
+ __iomem void *gswip;
+ __iomem void *mdio;
+ __iomem void *mii;
+ const struct gswip_hw_info *hw_info;
+ const struct xway_gphy_match_data *gphy_fw_name_cfg;
+ struct dsa_switch *ds;
+ struct device *dev;
+ struct regmap *rcu_regmap;
+ struct gswip_vlan vlans[64];
+ int num_gphy_fw;
+ struct gswip_gphy_fw *gphy_fw;
+ u32 port_vlan_filter;
+ struct mutex pce_table_lock;
+};
+
+#endif /* __LANTIQ_GSWIP_H */
--
2.50.1
Powered by blists - more mailing lists