| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250819065622.1019537-1-mwalle@kernel.org>
Date: Tue, 19 Aug 2025 08:56:22 +0200
From: Michael Walle <mwalle@...nel.org>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>
Cc: Siddharth Vadapalli <s-vadapalli@...com>,
Matthias Schiffer <matthias.schiffer@...tq-group.com>,
Andrew Lunn <andrew@...n.ch>,
linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
nm@...com,
vigneshr@...com,
Michael Walle <mwalle@...nel.org>
Subject: [PATCH v3] phy: ti: gmii-sel: Always write the RGMII ID setting
Some SoCs are just validated with the TX delay enabled. With commit
ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed
RGMII TX delay"), the network driver will patch the delay setting on the
fly assuming that the TX delay setting is fixed. In reality, the TX
delay is configurable and just skipped in the documentation. There are
bootloaders, which will disable the TX delay and this will lead to a
transmit path which doesn't add any delays at all.
Fix that by always writing the RGMII_ID setting and report an error for
unsupported RGMII delay modes.
This is safe to do and shouldn't break any boards in mainline because
the fixed delay is only introduced for gmii-sel compatibles which are
used together with the am65-cpsw-nuss driver and also contains the
commit above.
Fixes: ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delay")
Signed-off-by: Michael Walle <mwalle@...nel.org>
---
v3:
- simplify the logic. Thanks Matthias.
- reworded the commit message
v2:
- reject invalid PHY modes. Thanks Matthias.
- add a paragraph to the commit message that this patch shouldn't
break any existing boards. Thanks Andrew.
drivers/phy/ti/phy-gmii-sel.c | 47 +++++++++++++++++++++++++++++------
1 file changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index ff5d5e29629f..50adabb867cb 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -34,6 +34,7 @@ enum {
PHY_GMII_SEL_PORT_MODE = 0,
PHY_GMII_SEL_RGMII_ID_MODE,
PHY_GMII_SEL_RMII_IO_CLK_EN,
+ PHY_GMII_SEL_FIXED_TX_DELAY,
PHY_GMII_SEL_LAST,
};
@@ -127,6 +128,11 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
goto unsupported;
}
+ /* With a fixed delay, some modes are not supported at all. */
+ if (soc_data->features & BIT(PHY_GMII_SEL_FIXED_TX_DELAY) &&
+ rgmii_id != 0)
+ return -EINVAL;
+
if_phy->phy_if_mode = submode;
dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n",
@@ -210,25 +216,46 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = {
static const
struct reg_field phy_gmii_sel_fields_am654[][PHY_GMII_SEL_LAST] = {
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x0, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x8, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0xC, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x10, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x14, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x18, 0, 2), },
- { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x1C, 0, 2), },
+ {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x0, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x0, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x4, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x8, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x8, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0xC, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0xC, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x10, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x10, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x14, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x14, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x18, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x18, 4, 4),
+ }, {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x1C, 0, 2),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x1C, 4, 4),
+ },
};
static const
struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
.use_of_data = true,
+ .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
+ BIT(PHY_GMII_SEL_FIXED_TX_DELAY),
.regfields = phy_gmii_sel_fields_am654,
};
static const
struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
.use_of_data = true,
+ .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
+ BIT(PHY_GMII_SEL_FIXED_TX_DELAY),
.regfields = phy_gmii_sel_fields_am654,
.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII) |
BIT(PHY_INTERFACE_MODE_USXGMII),
@@ -239,6 +266,8 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
static const
struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j721e = {
.use_of_data = true,
+ .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
+ BIT(PHY_GMII_SEL_FIXED_TX_DELAY),
.regfields = phy_gmii_sel_fields_am654,
.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
.num_ports = 8,
@@ -248,6 +277,8 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j721e = {
static const
struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j784s4 = {
.use_of_data = true,
+ .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
+ BIT(PHY_GMII_SEL_FIXED_TX_DELAY),
.regfields = phy_gmii_sel_fields_am654,
.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII) |
BIT(PHY_INTERFACE_MODE_USXGMII),
--
2.39.5
Powered by blists - more mailing lists