[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250824013009.2443580-1-mmyangfl@gmail.com>
Date: Sun, 24 Aug 2025 09:30:03 +0800
From: David Yang <mmyangfl@...il.com>
To: netdev@...r.kernel.org
Cc: David Yang <mmyangfl@...il.com>,
Russell King <linux@...linux.org.uk>,
linux-kernel@...r.kernel.org
Subject: [PATCH net-next] net: phylink: remove stale an_enabled from doc
state->an_enabled was removed before, but is left in mac_config() doc,
so clean it.
Fixes: 4ee9b0dcf09f ("net: phylink: remove an_enabled")
Signed-off-by: David Yang <mmyangfl@...il.com>
---
include/linux/phylink.h | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 30659b615fca..9af0411761d7 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -320,9 +320,8 @@ int mac_prepare(struct phylink_config *config, unsigned int mode,
* If in 802.3z mode, the link speed is fixed, dependent on the
* @state->interface. Duplex and pause modes are negotiated via
* the in-band configuration word. Advertised pause modes are set
- * according to the @state->an_enabled and @state->advertising
- * flags. Beware of MACs which only support full duplex at gigabit
- * and higher speeds.
+ * according to @state->advertising. Beware of MACs which only
+ * support full duplex at gigabit and higher speeds.
*
* If in Cisco SGMII mode, the link speed and duplex mode are passed
* in the serial bitstream 16-bit configuration word, and the MAC
@@ -331,7 +330,7 @@ int mac_prepare(struct phylink_config *config, unsigned int mode,
* responsible for reading the configuration word and configuring
* itself accordingly.
*
- * Valid state members: interface, an_enabled, pause, advertising.
+ * Valid state members: interface, pause, advertising.
*
* Implementations are expected to update the MAC to reflect the
* requested settings - i.o.w., if nothing has changed between two
--
2.50.1
Powered by blists - more mailing lists