| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250825193918.3445531-2-ameryhung@gmail.com>
Date: Mon, 25 Aug 2025 12:39:12 -0700
From: Amery Hung <ameryhung@...il.com>
To: bpf@...r.kernel.org
Cc: netdev@...r.kernel.org,
alexei.starovoitov@...il.com,
andrii@...nel.org,
daniel@...earbox.net,
kuba@...nel.org,
martin.lau@...nel.org,
mohsin.bashr@...il.com,
saeedm@...dia.com,
tariqt@...dia.com,
mbloch@...dia.com,
maciej.fijalkowski@...el.com,
kernel-team@...a.com
Subject: [RFC bpf-next v1 1/7] net/mlx5e: Fix generating skb from nonlinear xdp_buff
xdp programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail(), bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5e driver by generating skb according to xdp_buff layout.
Currently, when handling multi-buf xdp, the mlx5e driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and the fragments remains the same. This may
cause the driver to generate erroneous skb or triggering a kernel
warning. When an xdp program added linear data through
bpf_xdp_adjust_head() the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb with empty linear data and then
pull data from fragments to fill the linear data area. When an xdp
program has shrunk the nonlinear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first build the skb with linear data area matching
the xdp_buff. Then, call __pskb_pull_tail() to fill the linear data for
up to MLX5E_RX_MAX_HEAD bytes. In addition, recalculate nr_frags and
truesize after xdp program runs.
Fixes: f52ac7028bec ("net/mlx5e: RX, Add XDP multi-buffer support in Striding RQ")
Signed-off-by: Amery Hung <ameryhung@...il.com>
---
.../net/ethernet/mellanox/mlx5/core/en_rx.c | 59 ++++++++++++++-----
1 file changed, 43 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index b8c609d91d11..c5173f1ccb4e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1725,16 +1725,17 @@ mlx5e_skb_from_cqe_nonlinear(struct mlx5e_rq *rq, struct mlx5e_wqe_frag_info *wi
struct mlx5_cqe64 *cqe, u32 cqe_bcnt)
{
struct mlx5e_rq_frag_info *frag_info = &rq->wqe.info.arr[0];
+ struct mlx5e_wqe_frag_info *pwi, *head_wi = wi;
struct mlx5e_xdp_buff *mxbuf = &rq->mxbuf;
- struct mlx5e_wqe_frag_info *head_wi = wi;
u16 rx_headroom = rq->buff.headroom;
struct mlx5e_frag_page *frag_page;
struct skb_shared_info *sinfo;
- u32 frag_consumed_bytes;
+ u32 frag_consumed_bytes, i;
struct bpf_prog *prog;
struct sk_buff *skb;
dma_addr_t addr;
u32 truesize;
+ u8 nr_frags;
void *va;
frag_page = wi->frag_page;
@@ -1775,14 +1776,26 @@ mlx5e_skb_from_cqe_nonlinear(struct mlx5e_rq *rq, struct mlx5e_wqe_frag_info *wi
prog = rcu_dereference(rq->xdp_prog);
if (prog && mlx5e_xdp_handle(rq, prog, mxbuf)) {
if (__test_and_clear_bit(MLX5E_RQ_FLAG_XDP_XMIT, rq->flags)) {
- struct mlx5e_wqe_frag_info *pwi;
+ pwi = head_wi;
+ while (pwi->frag_page->netmem != sinfo->frags[0].netmem && pwi < wi)
+ pwi++;
- for (pwi = head_wi; pwi < wi; pwi++)
+ for (i = 0; i < sinfo->nr_frags; i++, pwi++)
pwi->frag_page->frags++;
}
return NULL; /* page/packet was consumed by XDP */
}
+ nr_frags = sinfo->nr_frags;
+ pwi = head_wi + 1;
+
+ if (prog) {
+ truesize = sinfo->nr_frags * frag_info->frag_stride;
+
+ while (pwi->frag_page->netmem != sinfo->frags[0].netmem && pwi < wi)
+ pwi++;
+ }
+
skb = mlx5e_build_linear_skb(
rq, mxbuf->xdp.data_hard_start, rq->buff.frame0_sz,
mxbuf->xdp.data - mxbuf->xdp.data_hard_start,
@@ -1796,12 +1809,12 @@ mlx5e_skb_from_cqe_nonlinear(struct mlx5e_rq *rq, struct mlx5e_wqe_frag_info *wi
if (xdp_buff_has_frags(&mxbuf->xdp)) {
/* sinfo->nr_frags is reset by build_skb, calculate again. */
- xdp_update_skb_shared_info(skb, wi - head_wi - 1,
+ xdp_update_skb_shared_info(skb, nr_frags,
sinfo->xdp_frags_size, truesize,
xdp_buff_is_frag_pfmemalloc(
&mxbuf->xdp));
- for (struct mlx5e_wqe_frag_info *pwi = head_wi + 1; pwi < wi; pwi++)
+ for (i = 0; i < nr_frags; i++, pwi++)
pwi->frag_page->frags++;
}
@@ -2073,12 +2086,18 @@ mlx5e_skb_from_cqe_mpwrq_nonlinear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *w
}
if (prog) {
+ u8 nr_frags;
+ u32 len, i;
+
if (mlx5e_xdp_handle(rq, prog, mxbuf)) {
if (__test_and_clear_bit(MLX5E_RQ_FLAG_XDP_XMIT, rq->flags)) {
- struct mlx5e_frag_page *pfp;
+ struct mlx5e_frag_page *pagep = head_page;
+
+ while (pagep->netmem != sinfo->frags[0].netmem && pagep < frag_page)
+ pagep++;
- for (pfp = head_page; pfp < frag_page; pfp++)
- pfp->frags++;
+ for (i = 0; i < sinfo->nr_frags; i++)
+ pagep->frags++;
wi->linear_page.frags++;
}
@@ -2087,9 +2106,12 @@ mlx5e_skb_from_cqe_mpwrq_nonlinear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *w
return NULL; /* page/packet was consumed by XDP */
}
+ len = mxbuf->xdp.data_end - mxbuf->xdp.data;
+ nr_frags = sinfo->nr_frags;
+
skb = mlx5e_build_linear_skb(
rq, mxbuf->xdp.data_hard_start, linear_frame_sz,
- mxbuf->xdp.data - mxbuf->xdp.data_hard_start, 0,
+ mxbuf->xdp.data - mxbuf->xdp.data_hard_start, len,
mxbuf->xdp.data - mxbuf->xdp.data_meta);
if (unlikely(!skb)) {
mlx5e_page_release_fragmented(rq->page_pool,
@@ -2102,20 +2124,25 @@ mlx5e_skb_from_cqe_mpwrq_nonlinear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *w
mlx5e_page_release_fragmented(rq->page_pool, &wi->linear_page);
if (xdp_buff_has_frags(&mxbuf->xdp)) {
- struct mlx5e_frag_page *pagep;
+ struct mlx5e_frag_page *pagep = head_page;
+
+ truesize = nr_frags * PAGE_SIZE;
/* sinfo->nr_frags is reset by build_skb, calculate again. */
- xdp_update_skb_shared_info(skb, frag_page - head_page,
+ xdp_update_skb_shared_info(skb, nr_frags,
sinfo->xdp_frags_size, truesize,
xdp_buff_is_frag_pfmemalloc(
&mxbuf->xdp));
- pagep = head_page;
- do
+ while (pagep->netmem != sinfo->frags[0].netmem && pagep < frag_page)
+ pagep++;
+
+ for (i = 0; i < nr_frags; i++, pagep++)
pagep->frags++;
- while (++pagep < frag_page);
+
+ headlen = min_t(u16, MLX5E_RX_MAX_HEAD - len, sinfo->xdp_frags_size);
+ __pskb_pull_tail(skb, headlen);
}
- __pskb_pull_tail(skb, headlen);
} else {
dma_addr_t addr;
--
2.47.3
Powered by blists - more mailing lists