lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aK98xjr5bNDpSFtI@shell.armlinux.org.uk>
Date: Wed, 27 Aug 2025 22:46:46 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Andrew Lunn <andrew+netdev@...n.ch>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Eric Dumazet <edumazet@...gle.com>,
	David Miller <davem@...emloft.net>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	Florian Fainelli <f.fainelli@...il.com>
Subject: Re: [PATCH v3 net] net: phy: fixed_phy: fix missing calls to
 gpiod_put in fixed_mdio_bus_exit

On Wed, Aug 27, 2025 at 11:29:43PM +0200, Heiner Kallweit wrote:
> On 8/27/2025 11:09 PM, Russell King (Oracle) wrote:
> > On Wed, Aug 27, 2025 at 11:02:55PM +0200, Heiner Kallweit wrote:
> >> Cleanup in fixed_mdio_bus_exit() misses to call gpiod_put().
> >> Easiest fix is to call fixed_phy_del() for each possible phy address.
> >> This may consume a few cpu cycles more, but is much easier to read.
> >>
> >> Fixes: a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.")
> > 
> > Here's a question that should be considered as well. Do we still need
> > to keep the link-gpios for fixed-phy?
> > 
> > $ grep -r link-gpios arch/*/boot/dts/
> > arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts:                              link-gpios = <&gpio6 2
> > arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts:                              link-gpios = <&gpio6 3
> > 
> > These are used with the mv88e6xxx DSA switch, and DSA being fully
> > converted to phylink, means that fixed-phy isn't used for these
> > link-gpios properties, and hasn't been for some time.
> > 
> Means we can remove all "fixed-link" blocks from vf610-zii-dev-rev-b.dts?

phylink has support for it (because phylink needed to be 100%
compatible to avoid regressions!) Thus, there's no need to remove it,
nor drop it from the DT bindings.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ