lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250901083027.183468-4-idosch@nvidia.com>
Date: Mon, 1 Sep 2025 11:30:22 +0300
From: Ido Schimmel <idosch@...dia.com>
To: <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <kuba@...nel.org>, <pabeni@...hat.com>,
	<edumazet@...gle.com>, <horms@...nel.org>, <paul@...l-moore.com>,
	<dsahern@...nel.org>, <petrm@...dia.com>,
	<linux-security-module@...r.kernel.org>, Ido Schimmel <idosch@...dia.com>
Subject: [PATCH net-next 3/8] ipv4: icmp: Fix source IP derivation in presence of VRFs

When the "icmp_errors_use_inbound_ifaddr" sysctl is enabled, the source
IP of ICMP error messages should be the "primary address of the
interface that received the packet that caused the icmp error".

The IPv4 ICMP code determines this interface using inet_iif() which in
the input path translates to skb->skb_iif. If the interface that
received the packet is a VRF port, skb->skb_iif will contain the ifindex
of the VRF device and not that of the receiving interface. This is
because in the input path the VRF driver overrides skb->skb_iif with the
ifindex of the VRF device itself (see vrf_ip_rcv()).

As such, the source IP that will be chosen for the ICMP error message is
either an address assigned to the VRF device itself (if present) or an
address assigned to some VRF port, not necessarily the input or output
interface.

This behavior is especially problematic when the error messages are
"Time Exceeded" messages as it means that utilities like traceroute will
show an incorrect packet path.

Solve this by determining the input interface based on the iif field in
the control block, if present. This field is set in the input path to
skb->skb_iif and is not later overridden by the VRF driver, unlike
skb->skb_iif.

This behavior is consistent with the IPv6 counterpart that already uses
the iif from the control block.

Reported-by: Andy Roulin <aroulin@...dia.com>
Reported-by: Rajkumar Srinivasan <rajsrinivasa@...dia.com>
Reviewed-by: Petr Machata <petrm@...dia.com>
Signed-off-by: Ido Schimmel <idosch@...dia.com>
---
 net/ipv4/icmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 92fb7aef4abf..7547db362ec7 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -710,7 +710,8 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
 		rcu_read_lock();
 		if (rt_is_input_route(rt) &&
 		    READ_ONCE(net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr))
-			dev = dev_get_by_index_rcu(net, inet_iif(skb_in));
+			dev = dev_get_by_index_rcu(net, parm->iif ? parm->iif :
+						   inet_iif(skb_in));
 
 		if (dev)
 			saddr = inet_select_addr(dev, iph->saddr,
-- 
2.51.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ