netdev - Re: [PATCH v5 05/10] arm64: dts: qcom: lemans-evk: Enable PCIe support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <d2d17266-68a1-4a63-954b-9076db5315a5@oss.qualcomm.com>
Date: Wed, 17 Sep 2025 19:00:43 +0530
From: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>,
        Wasim Nazir <wasim.nazir@....qualcomm.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        Richard Cochran <richardcochran@...il.com>,
        Bartosz Golaszewski <brgl@...ev.pl>, kernel@....qualcomm.com,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        netdev@...r.kernel.org, linux-i2c@...r.kernel.org,
        Sushrut Shree Trivedi <quic_sushruts@...cinc.com>
Subject: Re: [PATCH v5 05/10] arm64: dts: qcom: lemans-evk: Enable PCIe
 support



On 9/17/2025 1:36 PM, Manivannan Sadhasivam wrote:
> On Tue, Sep 16, 2025 at 04:16:53PM GMT, Wasim Nazir wrote:
>> From: Sushrut Shree Trivedi <quic_sushruts@...cinc.com>
>>
>> Enable PCIe0 and PCIe1 along with the respective phy-nodes.
>>
>> PCIe0 is routed to an m.2 E key connector on the mainboard for wifi
>> attaches while PCIe1 routes to a standard PCIe x4 expansion slot.
>>
> 
> Where did you define the supply for M.2 connector? We don't have a proper
> binding for M.2 today, but atleast the supply should be modeled as a fixed
> regulator with EN GPIOs as like other boards.
> 
> - Mani
Hi Mani,

This board doesn't have any power supply for m.2 connector they are
always powered on.

- Krishna Chaitanya.
> 
>> Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@...cinc.com>
>> Signed-off-by: Wasim Nazir <wasim.nazir@....qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/lemans-evk.dts | 82 +++++++++++++++++++++++++++++++++
>>   1 file changed, 82 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
>> index 97428d9e3e41..99400ff12cfd 100644
>> --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
>> +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
>> @@ -431,6 +431,40 @@ &mdss0_dp1_phy {
>>   	status = "okay";
>>   };
>>   
>> +&pcie0 {
>> +	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
>> +	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
>> +
>> +	pinctrl-0 = <&pcie0_default_state>;
>> +	pinctrl-names = "default";
>> +
>> +	status = "okay";
>> +};
>> +
>> +&pcie0_phy {
>> +	vdda-phy-supply = <&vreg_l5a>;
>> +	vdda-pll-supply = <&vreg_l1c>;
>> +
>> +	status = "okay";
>> +};
>> +
>> +&pcie1 {
>> +	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
>> +	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
>> +
>> +	pinctrl-0 = <&pcie1_default_state>;
>> +	pinctrl-names = "default";
>> +
>> +	status = "okay";
>> +};
>> +
>> +&pcie1_phy {
>> +	vdda-phy-supply = <&vreg_l5a>;
>> +	vdda-pll-supply = <&vreg_l1c>;
>> +
>> +	status = "okay";
>> +};
>> +
>>   &qupv3_id_0 {
>>   	status = "okay";
>>   };
>> @@ -447,6 +481,54 @@ &sleep_clk {
>>   	clock-frequency = <32768>;
>>   };
>>   
>> +&tlmm {
>> +	pcie0_default_state: pcie0-default-state {
>> +		clkreq-pins {
>> +			pins = "gpio1";
>> +			function = "pcie0_clkreq";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +
>> +		perst-pins {
>> +			pins = "gpio2";
>> +			function = "gpio";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +
>> +		wake-pins {
>> +			pins = "gpio0";
>> +			function = "gpio";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +	};
>> +
>> +	pcie1_default_state: pcie1-default-state {
>> +		clkreq-pins {
>> +			pins = "gpio3";
>> +			function = "pcie1_clkreq";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +
>> +		perst-pins {
>> +			pins = "gpio4";
>> +			function = "gpio";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +
>> +		wake-pins {
>> +			pins = "gpio5";
>> +			function = "gpio";
>> +			drive-strength = <2>;
>> +			bias-pull-up;
>> +		};
>> +	};
>> +};
>> +
>>   &uart10 {
>>   	compatible = "qcom,geni-debug-uart";
>>   	pinctrl-0 = <&qup_uart10_default>;
>>
>> -- 
>> 2.51.0
>>
>