[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1761324950.git.daniel@makrotopia.org>
Date: Fri, 24 Oct 2025 18:01:07 +0100
From: Daniel Golle <daniel@...rotopia.org>
To: Hauke Mehrtens <hauke@...ke-m.de>, Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Simon Horman <horms@...nel.org>,
Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Andreas Schirm <andreas.schirm@...mens.com>,
Lukas Stockmann <lukas.stockmann@...mens.com>,
Alexander Sverdlin <alexander.sverdlin@...mens.com>,
Peter Christen <peter.christen@...mens.com>,
Avinash Jayaraman <ajayaraman@...linear.com>,
Bing tao Xu <bxu@...linear.com>, Liang Xu <lxu@...linear.com>,
Juraj Povazanec <jpovazanec@...linear.com>,
"Fanni (Fang-Yi) Chan" <fchan@...linear.com>,
"Benny (Ying-Tsan) Weng" <yweng@...linear.com>,
"Livia M. Rosu" <lrosu@...linear.com>,
John Crispin <john@...ozen.org>
Subject: [PATCH net-next 00/13] net: dsa: lantiq_gswip: Add support for
MaxLinear GSW1xx switch family
This patch series extends the existing lantiq_gswip DSA driver to support
the MaxLinear GSW1xx family of dedicated Ethernet switch ICs. These switches
are based on the same IP as the Lantiq/Intel GSWIP found in VR9 and xRX
MIPS router SoCs, but are connected via MDIO instead of memory-mapped I/O.
The series includes several improvements and refactoring to prepare for the
new hardware support.
The GSW1xx family includes several variants:
- GSW120: 4 ports, 2 PHYs, RGMII & SGMII/2500Base-X
- GSW125: 4 ports, 2 PHYs, RGMII & SGMII/2500Base-X, industrial temperature
- GSW140: 6 ports, 4 PHYs, RGMII & SGMII/2500Base-X
- GSW141: 6 ports, 4 PHYs, RGMII & SGMII
- GSW145: 6 ports, 4 PHYs, RGMII & SGMII/2500Base-X, industrial temperature
Key features implemented:
- MDIO-based register access using regmap
- Support for SGMII/1000Base-X/2500Base-X SerDes interfaces
- Configurable MII delays via device tree properties
- Energy Efficient Ethernet (EEE) support
- enabling/disabling learning
Daniel Golle (13):
net: dsa: lantiq_gswip: split into common and MMIO parts
net: dsa: lantiq_gswip: support enable/disable learning
net: dsa: lantiq_gswip: support Energy Efficient Ethernet
net: dsa: lantiq_gswip: set link parameters also for CPU port
net: dsa: lantiq_gswip: define and use
GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID
dt-bindings: net: dsa: lantiq,gswip: add support for MII delay
properties
net: dsa: lantiq_gswip: allow adjusting MII delays
dt-bindings: net: dsa: lantiq,gswip: add MaxLinear RMII refclk output
property
net: dsa: lantiq_gswip: add vendor property to setup MII refclk output
dt-bindings: net: dsa: lantiq,gswip: add support for MaxLinear GSW1xx
switches
net: dsa: add tagging driver for MaxLinear GSW1xx switch family
net: dsa: lantiq_gswip: add registers specific for MaxLinear GSW1xx
net: dsa: add driver for MaxLinear GSW1xx switch family
.../bindings/net/dsa/lantiq,gswip.yaml | 290 ++-
MAINTAINERS | 3 +-
drivers/net/dsa/lantiq/Kconfig | 18 +-
drivers/net/dsa/lantiq/Makefile | 2 +
drivers/net/dsa/lantiq/lantiq_gswip.c | 1617 +--------------
drivers/net/dsa/lantiq/lantiq_gswip.h | 128 ++
drivers/net/dsa/lantiq/lantiq_gswip_common.c | 1747 +++++++++++++++++
drivers/net/dsa/lantiq/mxl-gsw1xx.c | 685 +++++++
drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h | 154 ++
include/net/dsa.h | 2 +
net/dsa/Kconfig | 8 +
net/dsa/Makefile | 1 +
net/dsa/tag_mxl-gsw1xx.c | 138 ++
13 files changed, 3127 insertions(+), 1666 deletions(-)
create mode 100644 drivers/net/dsa/lantiq/lantiq_gswip_common.c
create mode 100644 drivers/net/dsa/lantiq/mxl-gsw1xx.c
create mode 100644 drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h
create mode 100644 net/dsa/tag_mxl-gsw1xx.c
--
2.51.0
Powered by blists - more mailing lists