[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a58f9a1c-a2f7-4c61-838e-7808e157ae25@bootlin.com>
Date: Wed, 29 Oct 2025 16:30:28 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: "G Thomas, Rohan" <rohan.g.thomas@...era.com>,
Andrew Lunn <andrew+netdev@...n.ch>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Steffen Trumtrar <s.trumtrar@...gutronix.de>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 1/4] net: stmmac: socfpga: Agilex5 EMAC platform
configuration
Hi,
On 29/10/2025 15:53, G Thomas, Rohan wrote:
> Hi Maxime,
>
> On 10/29/2025 7:04 PM, Maxime Chevallier wrote:
>> Hi Rohan,
>>
>> On 29/10/2025 09:06, Rohan G Thomas via B4 Relay wrote:
>>> From: Rohan G Thomas <rohan.g.thomas@...era.com>
>>>
>>> Agilex5 HPS EMAC uses the dwxgmac-3.10a IP, unlike previous socfpga
>>> platforms which use dwmac1000 IP. Due to differences in platform
>>> configuration, Agilex5 requires a distinct setup.
>>>
>>> Introduce a setup_plat_dat() callback in socfpga_dwmac_ops to handle
>>> platform-specific setup. This callback is invoked before
>>> stmmac_dvr_probe() to ensure the platform data is correctly
>>> configured. Also, implemented separate setup_plat_dat() callback for
>>> current socfpga platforms and Agilex5.
>>>
>>> Signed-off-by: Rohan G Thomas <rohan.g.thomas@...era.com>
>>> ---
>>> .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 53 ++++++++++++++++++----
>>> 1 file changed, 43 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
>>> index 2ff5db6d41ca08a1652d57f3eb73923b9a9558bf..3dae4f3c103802ed1c2cd390634bd5473192d4ee 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
>>> @@ -44,6 +44,7 @@
>>> struct socfpga_dwmac;
>>> struct socfpga_dwmac_ops {
>>> int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv);
>>> + void (*setup_plat_dat)(struct socfpga_dwmac *dwmac_priv);
>>> };
>>>
>>> struct socfpga_dwmac {
>>> @@ -441,6 +442,39 @@ static int socfpga_dwmac_init(struct platform_device *pdev, void *bsp_priv)
>>> return dwmac->ops->set_phy_mode(dwmac);
>>> }
>>>
>>> +static void socfpga_common_plat_dat(struct socfpga_dwmac *dwmac)
>>> +{
>>> + struct plat_stmmacenet_data *plat_dat = dwmac->plat_dat;
>>> +
>>> + plat_dat->bsp_priv = dwmac;
>>> + plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
>>> + plat_dat->init = socfpga_dwmac_init;
>>> + plat_dat->pcs_init = socfpga_dwmac_pcs_init;
>>> + plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
>>> + plat_dat->select_pcs = socfpga_dwmac_select_pcs;
>>> +}
>>> +
>>> +static void socfpga_gen5_setup_plat_dat(struct socfpga_dwmac *dwmac)
>>> +{
>>> + struct plat_stmmacenet_data *plat_dat = dwmac->plat_dat;
>>> +
>>> + socfpga_common_plat_dat(dwmac);
>>> +
>>> + plat_dat->core_type = DWMAC_CORE_GMAC;
>>> +
>>> + /* Rx watchdog timer in dwmac is buggy in this hw */
>>> + plat_dat->riwt_off = 1;
>>> +}
>>> +
>>> +static void socfpga_agilex5_setup_plat_dat(struct socfpga_dwmac *dwmac)
>>> +{
>>> + struct plat_stmmacenet_data *plat_dat = dwmac->plat_dat;
>>> +
>>> + socfpga_common_plat_dat(dwmac);
>>
>> I"m not familiar with this device (I only have a Cyclone V on hand), does
>> it still make sense to try to instantiate a Lynx (i.e. Altera TSE) PCS
>> for that IP ?
>
> AFAIK, yes it is supported by Agilex V device family also.
> https://www.altera.com/products/ip/a1jui0000049uuomam/triple-speed-ethernet-fpga-ip
Ah nice to know, thanks !
this looks correct then :)
Maxime
>
>>
>> Maxime
>>
>
> Best Regards,
> Rohan
>
Powered by blists - more mailing lists