netdev - [PATCH net-next v5 04/12] net: dsa: lantiq_gswip: set link parameters also for CPU port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1a34fc89944d17bba091d45ebd832bdffb355168.1761823194.git.daniel@makrotopia.org>
Date: Thu, 30 Oct 2025 11:27:48 +0000
From: Daniel Golle <daniel@...rotopia.org>
To: Hauke Mehrtens <hauke@...ke-m.de>, Andrew Lunn <andrew@...n.ch>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, Simon Horman <horms@...nel.org>,
	Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Andreas Schirm <andreas.schirm@...mens.com>,
	Lukas Stockmann <lukas.stockmann@...mens.com>,
	Alexander Sverdlin <alexander.sverdlin@...mens.com>,
	Peter Christen <peter.christen@...mens.com>,
	Avinash Jayaraman <ajayaraman@...linear.com>,
	Bing tao Xu <bxu@...linear.com>, Liang Xu <lxu@...linear.com>,
	Juraj Povazanec <jpovazanec@...linear.com>,
	"Fanni (Fang-Yi) Chan" <fchan@...linear.com>,
	"Benny (Ying-Tsan) Weng" <yweng@...linear.com>,
	"Livia M. Rosu" <lrosu@...linear.com>,
	John Crispin <john@...ozen.org>
Subject: [PATCH net-next v5 04/12] net: dsa: lantiq_gswip: set link
 parameters also for CPU port

On standalone switch ICs the link parameters of the CPU port need to
be setup just like user ports. The destinction in the driver to not
carry out link parameter setup for the CPU port does make sense for
in-SoC switches on which the CPU port is internally connected to the
SoC's Ethernet MAC.
Set link parameters also for the CPU port unless it is an internal
interface. Note that the internal TP PHYs anyway cannot be used as
CPU ports, hence it doesn't matter that they are now also covered by
that condition.

Signed-off-by: Daniel Golle <daniel@...rotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@...mens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@...mens.com>
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
---
v4: improve commit message

 drivers/net/dsa/lantiq/lantiq_gswip_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/lantiq/lantiq_gswip_common.c b/drivers/net/dsa/lantiq/lantiq_gswip_common.c
index 092187603dea..0ac87eb23bb5 100644
--- a/drivers/net/dsa/lantiq/lantiq_gswip_common.c
+++ b/drivers/net/dsa/lantiq/lantiq_gswip_common.c
@@ -1459,7 +1459,7 @@ static void gswip_phylink_mac_link_up(struct phylink_config *config,
 	struct gswip_priv *priv = dp->ds->priv;
 	int port = dp->index;
 
-	if (!dsa_port_is_cpu(dp)) {
+	if (!dsa_port_is_cpu(dp) || interface != PHY_INTERFACE_MODE_INTERNAL) {
 		gswip_port_set_link(priv, port, true);
 		gswip_port_set_speed(priv, port, speed, interface);
 		gswip_port_set_duplex(priv, port, duplex);
-- 
2.51.2