[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f2c3e18fe22284c4a5ab0ce085e2d17be844a0a8.camel@collabora.com>
Date: Thu, 30 Oct 2025 21:34:28 +0100
From: Sjoerd Simons <sjoerd@...labora.com>
To: Daniel Golle <daniel@...rotopia.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>, AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>, Ryder Lee
<ryder.lee@...iatek.com>, Jianjun Wang <jianjun.wang@...iatek.com>, Bjorn
Helgaas <bhelgaas@...gle.com>, Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kwilczynski@...nel.org>, Manivannan
Sadhasivam <mani@...nel.org>, Chunfeng Yun <chunfeng.yun@...iatek.com>,
Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
Lee Jones <lee@...nel.org>, Andrew Lunn <andrew+netdev@...n.ch>, "David S.
Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub
Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Lorenzo
Bianconi <lorenzo@...nel.org>, Felix Fietkau <nbd@....name>,
kernel@...labora.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org, netdev@...r.kernel.org, Bryan Hinton
<bryan@...anhinton.com>
Subject: Re: [PATCH 10/15] arm64: dts: mediatek: mt7981b: Add Ethernet and
WiFi offload support
On Thu, 2025-10-16 at 17:47 +0100, Daniel Golle wrote:
> On Thu, Oct 16, 2025 at 12:08:46PM +0200, Sjoerd Simons wrote:
> > Add device tree nodes for the Ethernet subsystem on MT7981B SoC,
> > including:
> > - Ethernet MAC controller with dual GMAC support
> > - Wireless Ethernet Dispatch (WED)
> > - SGMII PHY controllers for high-speed Ethernet interfaces
> > - Reserved memory regions for WiFi offload processor
> >
> > Signed-off-by: Sjoerd Simons <sjoerd@...labora.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 133 ++++++++++++++++++++++++++++++
> > 1 file changed, 133 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> > index 13950fe6e8766..c85fa0ddf2da8 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
[snip]
> > mdio_bus: mdio-bus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + int_gbe_phy: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0>;
> > + phy-mode = "gmii";
> > + phy-is-integrated;
> > + nvmem-cells = <&phy_calibration>;
> > + nvmem-cell-names = "phy-cal-data";
>
> Please also define the two LEDs here with their corresponding (only)
> pinctrl options for each of them, with 'status = "disabled";'. This
> makes it easier for boards to make use of the Ethernet PHY leds by just
> referencing the LED and setting the status to 'okay'.
I left those out on purpose as i can't easily validate them. They're probably better to be added once
someone adds a board using the hw led control.
>
--
Sjoerd Simons
Collabora Ltd.
Powered by blists - more mailing lists