[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <b8613028fb2f7f69e2fa5e658bd2840c790935d4.1761898321.git.buday.csaba@prolan.hu>
Date: Fri, 31 Oct 2025 09:15:06 +0100
From: Buday Csaba <buday.csaba@...lan.hu>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>, "David S. Miller"
	<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
	<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Rob Herring
	<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
	<conor+dt@...nel.org>, Florian Fainelli <f.fainelli@...il.com>,
	<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
CC: Buday Csaba <buday.csaba@...lan.hu>
Subject: [PATCH] dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID
Change PHY ID description in ethernet-phy.yaml to clarify that a
PHY ID is required (may -> must) when the PHY requires special
initialization sequence.
Link: https://lore.kernel.org/netdev/20251026212026.GA2959311-robh@kernel.org/
Link: https://lore.kernel.org/netdev/aQIZvDt5gooZSTcp@debianbuilder/
Signed-off-by: Buday Csaba <buday.csaba@...lan.hu>
---
 Documentation/devicetree/bindings/net/ethernet-phy.yaml | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2ec2d9fda..6f5599902 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -35,9 +35,10 @@ properties:
         description: PHYs that implement IEEE802.3 clause 45
       - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
         description:
-          If the PHY reports an incorrect ID (or none at all) then the
-          compatible list may contain an entry with the correct PHY ID
-          in the above form.
+          If the PHY reports an incorrect ID (or none at all), or the PHY
+          requires a specific initialization sequence (like a particular
+          order of clocks, resets, power supplies), then the compatible list
+          must contain an entry with the correct PHY ID in the above form.
           The first group of digits is the 16 bit Phy Identifier 1
           register, this is the chip vendor OUI bits 3:18. The
           second group of digits is the Phy Identifier 2 register,
-- 
2.39.5
Powered by blists - more mailing lists
 
