[<prev] [next>] [day] [month] [year] [list]
Message-ID: <45952240630d01c27832c4078c571d22@webmail1.ecil.co.in>
Date: Tue, 18 Nov 2025 11:44:36 +0000
From: sganguly@...l.co.in
To: netdev@...r.kernel.org, linux-fsl-dpaa@...escale.com
Subject: FMAN driver issue linux 5.10
Sir,
Please find the following configuration.
*
Kernel version (e.g., 5.10.131)
*
SoC/platform (T1014)
*
Symptom (TX “sent” but nothing on wire)
I am seeing increment in ifconfig but nothing sent or received physically on line.
I am attaching the dts file for reference.
Please help me to solve it.
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:55
inet addr:192.168.0.211 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:882 (882.0 B)
Memory:fe4e4000-fe4e4fff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3720 (3.6 KiB) TX bytes:3720 (3.6 KiB)
# ping 192.168.0.24
PING 192.168.0.24 (192.168.0.24): 56 data bytes
^C
--- 192.168.0.24 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:55
inet addr:192.168.0.211 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1008 (1008.0 B)
Memory:fe4e4000-fe4e4fff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3720 (3.6 KiB) TX bytes:3720 (3.6 KiB)
# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Current message level: 0x00002037 (8247)
drv probe link ifdown ifup hw
Link detected: yes
Regards
Supriyo Ganguly
Manager - Technical, R&D-II
ELECTRONICS CORPORATION OF INDIA LIMITED
HYDERABAD - 500062
Contact - 040-27186369
***************************************
THIS MAIL HAS BEEN SCANNED BY ECIL IMSVA.
***************************************
Content of type "text/html" skipped
Download attachment "ecs3500.dts" of type "application/octet-stream" (4794 bytes)
Powered by blists - more mailing lists