[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <52011433-79d3-4097-a2d3-d1cca1f66acb@gmail.com>
Date: Thu, 8 Jan 2026 21:25:56 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Andrew Lunn <andrew@...n.ch>, Andrew Lunn <andrew+netdev@...n.ch>,
Russell King - ARM Linux <linux@...linux.org.uk>,
Paolo Abeni <pabeni@...hat.com>, Eric Dumazet <edumazet@...gle.com>,
David Miller <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>,
Vladimir Oltean <vladimir.oltean@....com>,
Michael Klein <michael@...sekall.de>, Daniel Golle <daniel@...rotopia.org>,
Realtek linux nic maintainers <nic_swsd@...ltek.com>,
Aleksander Jan Bajkowski <olek2@...pl>,
Fabio Baltieri <fabio.baltieri@...il.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next 0/2] r8169: add support for RTL8127ATF (10G Fiber
SFP)
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
The PHY driver is used by the RTL8127ATF support in r8169.
RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
PHY ID.
Heiner Kallweit (2):
net: phy: realtek: add PHY driver for RTL8127ATF
r8169: add support for RTL8127ATF (Fiber SFP)
MAINTAINERS | 1 +
drivers/net/ethernet/realtek/r8169_main.c | 89 ++++++++++++++++++++++-
drivers/net/phy/realtek/realtek_main.c | 54 ++++++++++++++
include/linux/realtek_phy.h | 7 ++
4 files changed, 147 insertions(+), 4 deletions(-)
create mode 100644 include/linux/realtek_phy.h
--
2.52.0
Powered by blists - more mailing lists