netdev - [PATCH net-next v2 1/2] dt-bindings: net: pcs: renesas,rzn1-miic: Add renesas,miic-phylink-active-low property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260109142250.3313448-2-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri,  9 Jan 2026 14:22:49 +0000
From: Prabhakar <prabhakar.csengg@...il.com>
To: Clément Léger <clement.leger@...tlin.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Geert Uytterhoeven <geert+renesas@...der.be>,
	Magnus Damm <magnus.damm@...il.com>
Cc: linux-renesas-soc@...r.kernel.org,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Prabhakar <prabhakar.csengg@...il.com>,
	Biju Das <biju.das.jz@...renesas.com>,
	Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH net-next v2 1/2] dt-bindings: net: pcs: renesas,rzn1-miic: Add renesas,miic-phylink-active-low property

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>

Add the renesas,miic-phylink-active-low property to allow configuring the
active level of PHY link status signals provided by the MIIC block.

EtherPHY link-up and link-down status is required as a hardware feature
independent of whether GMAC or ETHSW is used. With GMAC, link status is
obtained via MDC/MDIO and handled in software. In contrast, ETHSW exposes
dedicated PHY link pins that provide this information directly in
hardware.

These PHY link signals are required not only for host-controlled traffic
but also for switch-only forwarding paths where frames are exchanged
between external nodes without CPU involvement. This is particularly
important for redundancy protocols such as DLR (Device Level Ring),
which depend on fast detection of link-down events caused by cable or
port failures. Handling such events purely in software introduces
latency, which is why ETHSW provides dedicated hardware link pins.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
v1->v2:
- Updated commit message to elaborate the necessity of PHY link signals.
---
 .../devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml     | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
index 3adbcf56d2be..825ae8a91e8b 100644
--- a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
+++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
@@ -86,6 +86,13 @@ patternProperties:
           and include/dt-bindings/net/renesas,r9a09g077-pcs-miic.h for RZ/N2H, RZ/T2H SoCs.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      renesas,miic-phylink-active-low:
+        type: boolean
+        description: Indicates that the PHY-link signal provided by the Ethernet switch,
+          EtherCAT, or SERCOS3 interface is active low. When present, this property
+          sets the corresponding signal polarity to active low. When omitted, the signal
+          defaults to active high.
+
     required:
       - reg
       - renesas,miic-input
-- 
2.52.0