| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com>
Date: Tue, 13 Jan 2026 12:37:44 -0300
From: Ricardo B. Marlière <rbm@...e.com>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Simon Horman <horms@...nel.org>,
Shuah Khan <shuah@...nel.org>, David Ahern <dsahern@...il.com>
Cc: netdev@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, Fernando Fernandez Mancera <fmancera@...e.de>,
Ricardo B. Marlière <rbm@...e.com>
Subject: [PATCH net v2] selftests: net: fib-onlink-tests: Convert to use
namespaces by default
Currently, the test breaks if the SUT already has a default route
configured for IPv6. Fix by avoiding the use of the default namespace.
Fixes: 4ed591c8ab44 ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Suggested-by: Fernando Fernandez Mancera <fmancera@...e.de>
Signed-off-by: Ricardo B. Marlière <rbm@...e.com>
---
Changes in v2:
- Don't use the default namespace, instead of simply increasing the metric
- Link to v1: https://lore.kernel.org/r/20251218-rbm-selftests-net-fib-onlink-v1-1-96302a5555c3@suse.com
---
tools/testing/selftests/net/fib-onlink-tests.sh | 71 +++++++++++--------------
1 file changed, 30 insertions(+), 41 deletions(-)
diff --git a/tools/testing/selftests/net/fib-onlink-tests.sh b/tools/testing/selftests/net/fib-onlink-tests.sh
index ec2d6ceb1f08..c01be076b210 100755
--- a/tools/testing/selftests/net/fib-onlink-tests.sh
+++ b/tools/testing/selftests/net/fib-onlink-tests.sh
@@ -120,7 +120,7 @@ log_subsection()
run_cmd()
{
- local cmd="$*"
+ local cmd="$1"
local out
local rc
@@ -145,7 +145,7 @@ get_linklocal()
local pfx
local addr
- addr=$(${pfx} ip -6 -br addr show dev ${dev} | \
+ addr=$(${pfx} ${IP} -6 -br addr show dev ${dev} | \
awk '{
for (i = 3; i <= NF; ++i) {
if ($i ~ /^fe80/)
@@ -173,58 +173,48 @@ setup()
set -e
- # create namespace
- setup_ns PEER_NS
+ # create namespaces
+ setup_ns ns1
+ IP="ip -netns $ns1"
+ setup_ns ns2
# add vrf table
- ip li add ${VRF} type vrf table ${VRF_TABLE}
- ip li set ${VRF} up
- ip ro add table ${VRF_TABLE} unreachable default metric 8192
- ip -6 ro add table ${VRF_TABLE} unreachable default metric 8192
+ ${IP} li add ${VRF} type vrf table ${VRF_TABLE}
+ ${IP} li set ${VRF} up
+ ${IP} ro add table ${VRF_TABLE} unreachable default metric 8192
+ ${IP} -6 ro add table ${VRF_TABLE} unreachable default metric 8192
# create test interfaces
- ip li add ${NETIFS[p1]} type veth peer name ${NETIFS[p2]}
- ip li add ${NETIFS[p3]} type veth peer name ${NETIFS[p4]}
- ip li add ${NETIFS[p5]} type veth peer name ${NETIFS[p6]}
- ip li add ${NETIFS[p7]} type veth peer name ${NETIFS[p8]}
+ ${IP} li add ${NETIFS[p1]} type veth peer name ${NETIFS[p2]}
+ ${IP} li add ${NETIFS[p3]} type veth peer name ${NETIFS[p4]}
+ ${IP} li add ${NETIFS[p5]} type veth peer name ${NETIFS[p6]}
+ ${IP} li add ${NETIFS[p7]} type veth peer name ${NETIFS[p8]}
# enslave vrf interfaces
for n in 5 7; do
- ip li set ${NETIFS[p${n}]} vrf ${VRF}
+ ${IP} li set ${NETIFS[p${n}]} vrf ${VRF}
done
# add addresses
for n in 1 3 5 7; do
- ip li set ${NETIFS[p${n}]} up
- ip addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
- ip addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} nodad
+ ${IP} li set ${NETIFS[p${n}]} up
+ ${IP} addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
+ ${IP} addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} nodad
done
# move peer interfaces to namespace and add addresses
for n in 2 4 6 8; do
- ip li set ${NETIFS[p${n}]} netns ${PEER_NS} up
- ip -netns ${PEER_NS} addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
- ip -netns ${PEER_NS} addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} nodad
+ ${IP} li set ${NETIFS[p${n}]} netns ${ns2} up
+ ip -netns $ns2 addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
+ ip -netns $ns2 addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} nodad
done
- ip -6 ro add default via ${V6ADDRS[p3]/::[0-9]/::64}
- ip -6 ro add table ${VRF_TABLE} default via ${V6ADDRS[p7]/::[0-9]/::64}
+ ${IP} -6 ro add default via ${V6ADDRS[p3]/::[0-9]/::64}
+ ${IP} -6 ro add table ${VRF_TABLE} default via ${V6ADDRS[p7]/::[0-9]/::64}
set +e
}
-cleanup()
-{
- # make sure we start from a clean slate
- cleanup_ns ${PEER_NS} 2>/dev/null
- for n in 1 3 5 7; do
- ip link del ${NETIFS[p${n}]} 2>/dev/null
- done
- ip link del ${VRF} 2>/dev/null
- ip ro flush table ${VRF_TABLE}
- ip -6 ro flush table ${VRF_TABLE}
-}
-
################################################################################
# IPv4 tests
#
@@ -241,7 +231,7 @@ run_ip()
# dev arg may be empty
[ -n "${dev}" ] && dev="dev ${dev}"
- run_cmd ip ro add table "${table}" "${prefix}"/32 via "${gw}" "${dev}" onlink
+ run_cmd "${IP} ro add table ${table} ${prefix}/32 via ${gw} ${dev} onlink"
log_test $? ${exp_rc} "${desc}"
}
@@ -257,8 +247,8 @@ run_ip_mpath()
# dev arg may be empty
[ -n "${dev}" ] && dev="dev ${dev}"
- run_cmd ip ro add table "${table}" "${prefix}"/32 \
- nexthop via ${nh1} nexthop via ${nh2}
+ run_cmd "${IP} ro add table ${table} ${prefix}/32 \
+ nexthop via ${nh1} nexthop via ${nh2}"
log_test $? ${exp_rc} "${desc}"
}
@@ -339,7 +329,7 @@ run_ip6()
# dev arg may be empty
[ -n "${dev}" ] && dev="dev ${dev}"
- run_cmd ip -6 ro add table "${table}" "${prefix}"/128 via "${gw}" "${dev}" onlink
+ run_cmd "${IP} -6 ro add table ${table} ${prefix}/128 via ${gw} ${dev} onlink"
log_test $? ${exp_rc} "${desc}"
}
@@ -353,8 +343,8 @@ run_ip6_mpath()
local exp_rc="$6"
local desc="$7"
- run_cmd ip -6 ro add table "${table}" "${prefix}"/128 "${opts}" \
- nexthop via ${nh1} nexthop via ${nh2}
+ run_cmd "${IP} -6 ro add table ${table} ${prefix}/128 ${opts} \
+ nexthop via ${nh1} nexthop via ${nh2}"
log_test $? ${exp_rc} "${desc}"
}
@@ -491,10 +481,9 @@ do
esac
done
-cleanup
setup
run_onlink_tests
-cleanup
+cleanup_ns ${ns1} ${ns2}
if [ "$TESTS" != "none" ]; then
printf "\nTests passed: %3d\n" ${nsuccess}
---
base-commit: 50e194b6da721e4fa1fc6ebcf5969803c214929a
change-id: 20260107-selftests-net-fib-onlink-73bd8643ad3e
Best regards,
--
Ricardo B. Marlière <rbm@...e.com>
Powered by blists - more mailing lists