[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260114184705.djvad5phrnfen6wx@skbuf>
Date: Wed, 14 Jan 2026 20:47:05 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
linux-arm-kernel@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Mohd Ayaan Anwar <mohd.anwar@....qualcomm.com>,
Neil Armstrong <neil.armstrong@...aro.org>, netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>, Vinod Koul <vkoul@...nel.org>
Subject: Re: [PATCH net-next 03/14] phy: qcom-sgmii-eth: add .set_mode() and
.validate() methods
On Wed, Jan 14, 2026 at 05:45:24PM +0000, Russell King (Oracle) wrote:
> qcom-sgmii-eth is an Ethernet SerDes supporting only Ethernet mode
> using SGMII, 1000BASE-X and 2500BASE-X.
>
> Add an implementation of the .set_mode() method, which can be used
> instead of or as well as the .set_speed() method. The Ethernet
> interface modes mentioned above all have a fixed data rate, so
> setting the mode is sufficient to fully specify the operating
> parameters.
>
> Add an implementation of the .validate() method, which will be
> necessary to allow discovery of the SerDes capabilities for platform
> independent SerDes support in the stmmac netowrk driver.
s/netowrk/network/
>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
> ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@....com>
Powered by blists - more mailing lists