[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aXnoV3Ay0uCc3HGQ@shell.armlinux.org.uk>
Date: Wed, 28 Jan 2026 10:43:35 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Inochi Amaoto <inochiama@...il.com>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Yixun Lan <dlan@...too.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Paul Walmsley <pjw@...nel.org>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>,
Yao Zi <ziyao@...root.org>,
Yanteng Si <siyanteng@...oftware.com.cn>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Choong Yong Liang <yong.liang.choong@...ux.intel.com>,
Chen-Yu Tsai <wens@...nel.org>,
Shangjuan Wei <weishangjuan@...incomputing.com>,
Boon Khai Ng <boon.khai.ng@...era.com>,
Quentin Schulz <quentin.schulz@...rry.de>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Jose Abreu <joabreu@...opsys.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
Longbin Li <looong.bin@...il.com>
Subject: Re: [PATCH net-next v3 3/3] net: stmmac: Add glue layer for Spacemit
K3 SoC
On Wed, Jan 28, 2026 at 03:29:29PM +0800, Inochi Amaoto wrote:
> +#include <linux/clk.h>
> +#include <linux/math.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +#include "stmmac_platform.h"
> +
> +/* ctrl register bits */
> +#define PHY_INTF_RGMII BIT(3)
> +#define PHY_INTF_MII BIT(4)
Please add a suitable prefix for these.
> +
> +#define WAKE_IRQ_EN BIT(9)
> +#define PHY_IRQ_EN BIT(12)
While you're renaming the PHY_INTF_*, you might wish to also add the
same prefix here to identify that they're all part of the same register.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists