[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <583feb00-09a8-4008-ae50-b6f3e3f990ba@ti.com>
Date: Wed, 4 Feb 2026 16:44:21 +0530
From: Meghana Malladi <m-malladi@...com>
To: Kevin Hao <haokexin@...il.com>, <netdev@...r.kernel.org>
CC: MD Danish Anwar <danishanwar@...com>, Roger Quadros <rogerq@...nel.org>,
Andrew Lunn <andrew+netdev@...n.ch>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, "Paolo
Abeni" <pabeni@...hat.com>, Jacob Keller <jacob.e.keller@...el.com>, "Vadim
Fedorenko" <vadim.fedorenko@...ux.dev>, Himanshu Mittal <h-mittal1@...com>,
Simon Horman <horms@...nel.org>, Byungchul Park <byungchul@...com>, "Markus
Elfring" <elfring@...rs.sourceforge.net>
Subject: Re: [EXTERNAL] [PATCH net-next 0/2] net: ti: icssg: Remove dedicated
workqueue for ndo_set_rx_mode callback
Hi Kevin,
On 2/4/26 08:11, Kevin Hao wrote:
> While addressing an issue in the cpsw driver, I based my fix on the
> implementation of the emac_ndo_set_rx_mode() function in icssg. During
> review, Jakub pointed out that the dedicated workqueue for the
> ndo_set_rx_mode callback might be unnecessary.
> ZjQcmQRYFpfptBannerStart
> This message was sent from outside of Texas Instruments.
> Do not click links or open attachments unless you recognize the source
> of this email and know the content is safe.
> Report Suspicious
> <https://us-phishalarm-ewt.proofpoint.com/EWT/v1/G3vK!
> uxdqXRfPtm1bKoXPFrvrtsCD2dIkXHVJwEzupcwg1k-qY0e_2PUuMdZgJf-
> SUVShc4kuXcBnqQbeqGz1dHBW-_OSdROPAjSiNpSTmAhDg8nQbc8$>
> ZjQcmQRYFpfptBannerEnd
>
> While addressing an issue in the cpsw driver, I based my fix on the
> implementation of the emac_ndo_set_rx_mode() function in icssg. During review,
> Jakub pointed out that the dedicated workqueue for the ndo_set_rx_mode
> callback might be unnecessary. I subsequently used the system workqueue for
> this purpose in the cpsw driver, and it performed as expected. Therefore,
> I believe the same approach can be applied to the icssg driver. These two
> patches aim to remove this dedicated workqueue for icssg drivers.
>
It would be more helpful, if you could provide link to the cpsw fix
which you have mentioned above.
> Please note: I do not have access to a board that supports the CSSG PRU
> Ethernet controller, so this change has only been build-tested.
>
> ---
> Cc: MD Danish Anwar <danishanwar@...com>
> Cc: Roger Quadros <rogerq@...nel.org>
> Cc: Andrew Lunn <andrew+netdev@...n.ch>
> Cc: "David S. Miller" <davem@...emloft.net>
> Cc: Eric Dumazet <edumazet@...gle.com>
> Cc: Jakub Kicinski <kuba@...nel.org>
> Cc: Paolo Abeni <pabeni@...hat.com>
> Cc: Meghana Malladi <m-malladi@...com>
> Cc: Jacob Keller <jacob.e.keller@...el.com>
> Cc: Vadim Fedorenko <vadim.fedorenko@...ux.dev>
> Cc: Himanshu Mittal <h-mittal1@...com>
> Cc: Simon Horman <horms@...nel.org>
> Cc: Byungchul Park <byungchul@...com>
> Cc: Markus Elfring <elfring@...rs.sourceforge.net>
>
> ---
> Kevin Hao (2):
> net: ti: icssg-prueth-sr1: Remove unused workqueue
> net: ti: icssg-prueth: Use system default workqueue in ndo_set_rx_mode callback
>
> drivers/net/ethernet/ti/icssg/icssg_common.c | 1 -
> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 13 ++++---------
> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 1 -
> drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c | 9 +--------
> 4 files changed, 5 insertions(+), 19 deletions(-)
> ---
> base-commit: 5c009020744fe129e4728e71c44a6c7816c9105e
> change-id: 20260203-icssg-prueth-workqueue-f460eba72132
>
> Best regards,
> --
> Kevin Hao <haokexin@...il.com>
>
Thanks,
Meghana
Powered by blists - more mailing lists