bugtraq - Re: Linksys WRT54G - Advice for european users

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date: Wed, 9 Jun 2004 00:15:06 +0200
From: Richard Bjerregaard <bjerregaard@...e.dk>
To: bugtraq@...urityfocus.com
Cc: "Connor, Ethan M. W" <emconnor@...dersonbrothers.com>
Subject: Re: Linksys WRT54G - Advice for european users

Hejsa Ethan

7. juni 2004, 18:56:18, you wrote:

CEMW> Another bit of warning about linksys and their inability to get the firmware
CEMW> release vs. hardware version worked out correctly.  If you install the
CEMW> latest WAP54G firmware update for the v2 hardware on v1 or v1.1 hardware
CEMW> (which the readme says is supported)...  Expect the ethernet port to disable
CEMW> itself (due to the order in which the interfaces are initialized on the
CEMW> device) after you power cycle it...

From the readme.txt
"
Note:  If you try and upgrade an older unit to firmware 2.07 without upgrading
the firmware to 1.09.1 prior to upgrade, you may damage the Access
Point."

Checkout these links

http://www.linksys.com/international/firmware.asp?intfwid=9&coid=48

This document explains how to upgrade your WAP54G to firmware version 2.07.01
The procedure applies to V1.0 and V1.1 hardwares.
http://www.linksys.com/download/vertxt/WAP54GupgradeprocedureV2.doc

-- 
Best regards/Venlig hilsen
Richard Bjerregaard