lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Tue, 18 Sep 2007 18:47:23 +0300
From:	Anti Sullin <anti.sullin@...ecdesign.ee>
To:	LKML <linux-kernel@...r.kernel.org>
CC:	dtor@...l.ru, akpm@...ux-foundation.org, david-b@...bell.net
Subject: [PATCH 2/2][resend] gpio_keys: Add suspend and resume

This patch adds suspend/resume support and enables wakeup from gpio_keys 
buttons.

Signed-off-by: Anti Sullin <anti.sullin@...ecdesign.ee>

---
Compared to  previous patch sent, in this version the disable_irq_wake is
called only for those IRQs, that were enabled earlier.

---
diff -pur linux-2.6.23-rc5-old/drivers/input/keyboard/gpio_keys.c linux-2.6.23-rc5/drivers/input/keyboard/gpio_keys.c
--- linux-2.6.23-rc5-old/drivers/input/keyboard/gpio_keys.c	2007-09-18 17:43:54.000000000 +0300
+++ linux-2.6.23-rc5/drivers/input/keyboard/gpio_keys.c	2007-09-18 17:25:14.000000000 +0300
@@ -54,6 +54,7 @@ static int __devinit gpio_keys_probe(str
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct input_dev *input;
 	int i, error;
+	int wakeup = 0;
 
 	input = input_allocate_device();
 	if (!input)
@@ -89,6 +90,9 @@ static int __devinit gpio_keys_probe(str
 			goto fail;
 		}
 
+		if (button->wakeup) 
+			wakeup = 1;
+		
 		input_set_capability(input, type, button->code);
 	}
 
@@ -98,6 +102,8 @@ static int __devinit gpio_keys_probe(str
 		goto fail;
 	}
 
+	device_init_wakeup(&pdev->dev, wakeup);
+	
 	return 0;
 
  fail:
@@ -120,14 +126,55 @@ static int __devexit gpio_keys_remove(st
 		free_irq(irq, pdev);
 	}
 
+	device_init_wakeup(&pdev->dev, 0);
 	input_unregister_device(input);
 
 	return 0;
 }
 
+
+#ifdef CONFIG_PM
+static int gpio_keys_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	int i;
+
+	if (device_may_wakeup(&pdev->dev)) {
+		for (i = 0; i < pdata->nbuttons; i++) {
+			int irq = gpio_to_irq(pdata->buttons[i].gpio);
+			if (pdata->buttons[i].wakeup)
+				enable_irq_wake(irq);
+		}
+	}
+
+	return 0;
+}
+
+static int gpio_keys_resume(struct platform_device *pdev)
+{
+	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	int i;
+
+	if (device_may_wakeup(&pdev->dev)) {
+		for (i = 0; i < pdata->nbuttons; i++) {
+			int irq = gpio_to_irq(pdata->buttons[i].gpio);
+			if (pdata->buttons[i].wakeup)
+				disable_irq_wake(irq);
+		}
+	}
+
+	return 0;
+}
+#else
+#define gpio_keys_suspend	NULL
+#define gpio_keys_resume	NULL
+#endif
+
 struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
 	.remove		= __devexit_p(gpio_keys_remove),
+	.suspend	= gpio_keys_suspend,
+	.resume		= gpio_keys_resume,	
 	.driver		= {
 		.name	= "gpio-keys",
 	}
diff -pur linux-2.6.23-rc5-old/include/linux/gpio_keys.h linux-2.6.23-rc5/include/linux/gpio_keys.h
--- linux-2.6.23-rc5-old/include/linux/gpio_keys.h	2007-09-01 09:08:24.000000000 +0300
+++ linux-2.6.23-rc5/include/linux/gpio_keys.h	2007-09-10 10:43:39.000000000 +0300
@@ -8,6 +8,7 @@ struct gpio_keys_button {
 	int active_low;
 	char *desc;
 	int type;		/* input event type (EV_KEY, EV_SW) */
+	int wakeup;		/* configure the button as wake-up source from suspend */
 };
 
 struct gpio_keys_platform_data {


-- 
Anti Sullin
Embedded Software Engineer
Artec Design LLC
Türi 10C, 11313, Tallinn, Estonia
Phone: +3726718550; Direct: +3726718564
Fax: +3726718555; GSM: +3725583068
email: anti.sullin@...ecdesign.ee
http://www.artecdesign.ee 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ