| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 05 May 2009 10:45:47 -0700
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: Yu Zhao <yu.zhao@...el.com>
Cc: Sheng Yang <sheng@...ux.intel.com>,
kvm-devel <kvm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
linux-scsi <linux-scsi@...r.kernel.org>,
Hannes Reinecke <hare@...e.de>,
FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
Mike Christie <michaelc@...wisc.edu>,
James Bottomley <James.Bottomley@...senPartnership.com>,
Douglas Gilbert <dgilbert@...erlog.com>,
Greg KH <greg@...ah.com>, Christoph Hellwig <hch@....de>
Subject: Re: KVM x86_64 with SR-IOV..? (device passthrough with LIO-Target
v3.0)
On Tue, 2009-05-05 at 04:28 -0700, Nicholas A. Bellinger wrote:
> On Tue, 2009-05-05 at 03:43 -0700, Nicholas A. Bellinger wrote:
> > On Tue, 2009-05-05 at 09:42 +0800, Yu Zhao wrote:
> > > Hi,
> > >
> > > The VF also works in the host if the VF driver is programed properly.
> > > So it would be easier to develop the VF driver in the host and then
> > > verify the VF driver in the guest.
> > >
> > > BTW, I didn't see the SR-IOV is enabled in your dmesg, did you select
> > > the CONFIG_PCI_IOV in the kernel .config?
> > >
> > > Thanks,
> > > Yu
> > >
> >
> > Greetings Yu and Sheng,
> >
> > So the original attachment was for the v2.6.29-fc11 host kernel output,
> > I ended up jumping to v2.6.30-rc3 (and making sure CONFIG_PCI_IOV was
> > enabled) for KVM host with kvm-85 and now things are looking quite
> > stable for me.
> >
> > So far I have been able to successfully push LIO-Target v3.0 traffic
> > *inside* a v2.6.29.2 KVM guest via the onboard e1000e (02:00.0) port
> > from another Linux/iSCSI Initiator machine using a Intel 1 Gb/sec port.
> > I am running badblocks tests to iSCSI Logical Units for RAMDISK_DR and
> > FILEIO storage objects (in the KVM Guest), and they are passing
> > validation and I am seeing ~500 Mb/sec of throughput and very low CPU
> > usage in the KVM guests.
> >
>
> Ok I am seeing another issue with the e1000e port on 02:00.0..:
>
> As i start to push multiple badblocks tests RAMDISK_DR iSCSI Logical
> units into KVM Guest running LIO v2.6.29.2 from the external Linux/iSCSI
> Initiator machine, after about 100 GB of iSCSI traffic, I see the
> following exception in KVM host v2.6.30-rc3:
>
> DRHD: handling fault status reg 2
> DMAR:[DMA Write] Request device [02:00.0] fault addr 7fc958b010000
> DMAR:[fault reason 04] Access beyond MGAW
> pci-stub 0000:02:00.0: irq 59 for MSI/MSI-X
> pci-stub 0000:02:00.0: irq 60 for MSI/MSI-X
> pci-stub 0000:02:00.0: irq 61 for MSI/MSI-X
>
> I am able to restart the LIO-Target KVM Guest and the Linux/iSCSI
> Initiators are able to reconnect.. Wow, very cool..
>
> Not sure if this is a bug in the target_core_mod RAMDISK_DR subsystem
> plugin (mapping struct iovec to internally allocated struct page) or
> what. I will have to look at the DMAR code to understand what this
> exception means..
>
Greetings Yu, Sheng and Co,
So I have been making progress this morning.. So far, I have hooked up
a LSI mpt-function PCIe SAS adapter into the KVM guest with a Sandisk
SATA SSD 32 GB drive. It is using MSI interrupts (not MSI-X) and I am
able to push ~70 MB/sec from a 2nd Linux/iSCSI Initiator machine
(running Open-iSCSI) with the 1500 byte MTUs on e1000e ports from within
the KVM guest.
The interesting thing is that I am having to use IBLOCK export (using
using submit_bio(), and complete emulation of SCSI control path) for
SATA SSD in order to get I/O running stable Using the pSCSI export I am
getting immediate exceptions from scsi_execute_async() in the v2.6.29.2
KVM guest.. Using a 2nd SAS disk I am able to use target_core_mod/pSCSI
export and push badblocks and LTP disktest traffic however..
Here is a bit about the the setup looks,
*) Linux/iSCSI Initiator node accessing KVM Guest LIO-Target v3.0
storage:
subjekt:~# lsscsi
[6:0:0:0] disk ATA ST3250820AS 3.AA /dev/sda
[10:0:0:0] cd/dvd PIONEER DVD-ROM DVD-305 1.06 /dev/scd1
[18:0:0:0] cd/dvd TOSHIBA DVD/HD X807616 MC08 /dev/scd2
[32:0:0:0] disk LIO-ORG RAMDISK-DR 3.0 /dev/sdb
[32:0:0:1] disk LIO-ORG RAMDISK-DR 3.0 /dev/sdc
[32:0:0:2] disk LIO-ORG FILEIO 3.0 /dev/sdd
[32:0:0:3] disk LIO-ORG IBLOCK 3.0 /dev/sde
subjekt:~# sg_inq -i /dev/sde
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
id_type: NAA, code_set: Binary
associated with the addressed logical unit
NAA 6, IEEE Company_id: 0x1405
Vendor Specific Identifier: 0xa97e4ce21
Vendor Specific Identifier Extension: 0xc0711de829b000c2
[0x6001405a97e4ce21c0711de829b000c2]
Designation descriptor number 2, descriptor length: 52
id_type: T10 vendor identification, code_set: ASCII
associated with the addressed logical unit
vendor id: LIO-ORG
vendor specific: IBLOCK:a97e4ce21c0711de829b000c2943d57b
Designation descriptor number 3, descriptor length: 8
transport: Internet SCSI (iSCSI)
id_type: Relative target port, code_set: Binary
associated with the target port
Relative target port: 0x1
Designation descriptor number 4, descriptor length: 8
transport: Internet SCSI (iSCSI)
id_type: Target port group, code_set: Binary
associated with the target port
Target port group: 0x0
Designation descriptor number 5, descriptor length: 8
id_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
Logical unit group: 0x0
Designation descriptor number 6, descriptor length: 80
transport: Internet SCSI (iSCSI)
id_type: SCSI name string, code_set: UTF-8
associated with the target port
SCSI name string:
iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6,t,0x0001
The SATA SSD is available as /dev/sde on the Linux/iSCSI Initiator node,
the 2nd SAS disk was removed from the dmesg below as having multiple
drives on the mpt-function card made it start to hiccup..
--nab
*) From with the LIO-Target KVM gest:
lenny64guest1:~# lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 20)
00:04.0 RAM memory: Qumranet, Inc. Device 1002
00:05.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
00:06.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 02)
*) Dmesg from LIO-Target KVM guest:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29.2 (root@...ny64guest1) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Mon May 4 01:22:53 PDT 2009
[ 0.000000] Command line: root=/dev/hda1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fff0000 @ 8000-c000
[ 0.000000] last_map_addr: 7fff0000 end: 7fff0000
[ 0.000000] RAMDISK: 379c8000 - 37fef480
[ 0.000000] ACPI: RSDP 000FBE50, 0014 (r0 QEMU )
[ 0.000000] ACPI: RSDT 7FFF0000, 002C (r1 QEMU QEMURSDT 1 QEMU 1)
[ 0.000000] ACPI: FACP 7FFF002C, 0074 (r1 QEMU QEMUFACP 1 QEMU 1)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7FFF0100, 2540 (r1 BXPC BXDSDT 1 INTL 20061109)
[ 0.000000] ACPI: FACS 7FFF00C0, 0040
[ 0.000000] ACPI: APIC 7FFF2640, 00E0 (r1 QEMU QEMUAPIC 1 QEMU 1)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fff0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [000000000000a000 - 0000000000019fff] pages 10
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000070493c] TEXT DATA BSS ==> [0000200000 - 000070493c]
[ 0.000000] #3 [00379c8000 - 0037fef480] RAMDISK ==> [00379c8000 - 0037fef480]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000fbd10] 000fbd10
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1387 pages reserved
[ 0.000000] DMA zone: 2556 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7112 pages used for memmap
[ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 14 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ffbc000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515620
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/hda1 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2266.815 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2055644k/2097088k available (2463k kernel code, 388k absent, 41056k reserved, 1259k data, 464k init)
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.63 BogoMIPS (lpj=9067260)
[ 0.004985] Security Framework initialized
[ 0.005422] SELinux: Disabled at boot.
[ 0.005995] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007887] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008603] Mount-cache hash table entries: 256
[ 0.009309] Initializing cgroup subsys ns
[ 0.009739] Initializing cgroup subsys cpuacct
[ 0.010172] Initializing cgroup subsys devices
[ 0.010655] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.011229] CPU: L2 cache: 2048K
[ 0.011633] CPU 0/0x0 -> Node 0
[ 0.012061] ACPI: Core revision 20081204
[ 0.013529] Setting APIC routing to flat
[ 0.015117] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.055398] CPU0: Intel QEMU Virtual CPU version 0.10.0 stepping 03
[ 0.273970] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4533.28 BogoMIPS (lpj=9066565)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.364147] CPU1: Intel QEMU Virtual CPU version 0.10.0 stepping 03
[ 0.367429] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.372036] Brought up 2 CPUs
[ 0.372442] Total of 2 processors activated (9066.91 BogoMIPS).
[ 0.373176] CPU0 attaching sched-domain:
[ 0.373181] domain 0: span 0-1 level CPU
[ 0.373183] groups: 0 1
[ 0.373186] CPU1 attaching sched-domain:
[ 0.373187] domain 0: span 0-1 level CPU
[ 0.373188] groups: 1 0
[ 0.373255] net_namespace: 1888 bytes
[ 0.373255] NET: Registered protocol family 16
[ 0.373269] ACPI: bus type pci registered
[ 0.376082] PCI: Using configuration type 1 for base access
[ 0.380281] bio: create slab <bio-0> at 0
[ 0.381293] ACPI: EC: Look up EC in DSDT
[ 0.383292] ACPI: Interpreter enabled
[ 0.383693] ACPI: (supports S0 S3 S4 S5)
[ 0.384763] ACPI: Using IOAPIC for interrupt routing
[ 0.388691] ACPI: No dock devices found.
[ 0.388729] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.393074] pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
[ 0.393406] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.393920] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.395842] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf1ffffff]
[ 0.396508] pci 0000:00:02.0: reg 14 32bit mmio: [0xf2000000-0xf2000fff]
[ 0.401611] pci 0000:00:03.0: reg 10 io port: [0xc100-0xc1ff]
[ 0.401674] pci 0000:00:03.0: reg 14 32bit mmio: [0xf2001000-0xf20010ff]
[ 0.401903] pci 0000:00:04.0: reg 10 io port: [0xc200-0xc21f]
[ 0.403518] pci 0000:00:05.0: reg 10 32bit mmio: [0xf2020000-0xf203ffff]
[ 0.404059] pci 0000:00:05.0: reg 18 io port: [0xc220-0xc23f]
[ 0.404368] pci 0000:00:05.0: reg 1c 32bit mmio: [0xf2040000-0xf2043fff]
[ 0.405176] pci 0000:00:06.0: reg 10 io port: [0xc300-0xc3ff]
[ 0.405474] pci 0000:00:06.0: reg 14 32bit mmio: [0xf2044000-0xf2047fff]
[ 0.405804] pci 0000:00:06.0: reg 1c 32bit mmio: [0xf2050000-0xf205ffff]
[ 0.405948] pci 0000:00:06.0: reg 30 32bit mmio: [0x200000-0x3fffff]
[ 0.406577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.408281] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.412098] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.413393] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.414571] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.416142] usbcore: registered new interface driver usbfs
[ 0.416504] usbcore: registered new interface driver hub
[ 0.416504] usbcore: registered new device driver usb
[ 0.416508] PCI: Using ACPI for IRQ routing
[ 0.452044] pnp: PnP ACPI init
[ 0.452515] ACPI: bus type pnp registered
[ 0.454439] pnp: PnP ACPI: found 7 devices
[ 0.454918] ACPI: ACPI bus type pnp unregistered
[ 0.460804] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.460807] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.460969] NET: Registered protocol family 2
[ 0.508246] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.537526] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.542048] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.543577] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.544332] TCP reno registered
[ 0.556665] NET: Registered protocol family 1
[ 0.557476] checking if image is initramfs... it is
[ 0.980042] Switched to high resolution mode on CPU 1
[ 0.983993] Switched to high resolution mode on CPU 0
[ 1.028987] Freeing initrd memory: 6301k freed
[ 1.032241] audit: initializing netlink socket (disabled)
[ 1.032745] type=2000 audit(1241543237.032:1): initialized
[ 1.035249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.036055] VFS: Disk quotas dquot_6.5.2
[ 1.036182] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.036182] msgmni has been set to 4027
[ 1.036182] alg: No test for stdrng (krng)
[ 1.036182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.036182] io scheduler noop registered
[ 1.036182] io scheduler anticipatory registered
[ 1.036182] io scheduler deadline registered
[ 1.040223] io scheduler cfq registered (default)
[ 1.040692] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.041194] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.041681] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.042183] pci 0000:00:02.0: Boot video device
[ 1.048876] Linux agpgart interface v0.103
[ 1.049315] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.050082] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.051351] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.054962] brd: module loaded
[ 1.055662] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.111469] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.112044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.112901] mice: PS/2 mouse device common for all mice
[ 1.114216] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.114828] rtc0: alarms up to one day, 114 bytes nvram
[ 1.115363] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.115934] cpuidle: using governor ladder
[ 1.116448] cpuidle: using governor menu
[ 1.116926] No iBFT detected.
[ 1.117634] TCP cubic registered
[ 1.118088] NET: Registered protocol family 17
[ 1.118873] registered taskstats version 1
[ 1.119543] rtc_cmos 00:01: setting system clock to 2009-05-05 17:07:17 UTC (1241543237)
[ 1.120418] Freeing unused kernel memory: 464k freed
[ 1.193327] processor ACPI_CPU:00: registered as cooling_device0
[ 1.194273] processor ACPI_CPU:01: registered as cooling_device1
[ 1.392735] Uniform Multi-Platform E-IDE driver
[ 1.413020] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.413531] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 1.415182] 8139too Fast Ethernet driver 0.9.28
[ 1.415673] 8139too 0000:00:03.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
[ 1.418181] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 1.418680] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.419758] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 1.420328] e1000e 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 1.421130] e1000e 0000:00:05.0: setting latency timer to 64
[ 1.421963] e1000e 0000:00:05.0: irq 24 for MSI/MSI-X
[ 1.421999] e1000e 0000:00:05.0: irq 25 for MSI/MSI-X
[ 1.422033] e1000e 0000:00:05.0: irq 26 for MSI/MSI-X
[ 1.431733] SCSI subsystem initialized
[ 1.445624] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.453420] Fusion MPT base driver 3.04.07
[ 1.453849] Copyright (c) 1999-2008 LSI Corporation
[ 1.461332] Fusion MPT SAS Host driver 3.04.07
[ 1.464878] FDC 0 is a S82078B
[ 1.549697] 0000:00:05.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:e0:81:c0:90:b2
[ 1.550752] 0000:00:05.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.551549] 0000:00:05.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 1.553336] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.553940] udev: renamed network interface eth0 to eth1
[ 1.554683] 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 1.557146] eth0: RTL-8139C+ at 0xffffc2000096a000, 52:54:00:12:34:56, IRQ 11
[ 1.560485] 8139cp 0000:00:03.0: setting latency timer to 64
[ 1.560904] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.561607] mptsas 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
[ 1.563379] mptbase: ioc0: Initiating bringup
[ 1.634659] mptbase: ioc0: WARNING - Unexpected doorbell active!
[ 5.343913] ioc0: LSISAS1068E B1: Capabilities={Initiator}
[ 5.345428] mptsas 0000:00:06.0: setting latency timer to 64
[ 22.874565] scsi0 : ioc0: LSISAS1068E B1, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=10
[ 22.903281] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD SATA 1.20 PQ: 0 ANSI: 5
[ 22.906530] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 22.908623] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 22.909390] PIIX_IDE 0000:00:01.1: setting latency timer to 64
[ 22.909410] ide0: BM-DMA at 0xc000-0xc007
[ 22.910045] ide1: BM-DMA at 0xc008-0xc00f
[ 22.910666] Probing IDE interface ide0...
[ 22.933264] Driver 'sd' needs updating - please use bus_type methods
[ 22.936186] sd 0:0:0:0: [sda] 62533296 512-byte hardware sectors: (32.0 GB/29.8 GiB)
[ 22.938165] sd 0:0:0:0: [sda] Write Protect is off
[ 22.938808] sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 22.940775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.942194] sd 0:0:0:0: [sda] 62533296 512-byte hardware sectors: (32.0 GB/29.8 GiB)
[ 22.944225] sd 0:0:0:0: [sda] Write Protect is off
[ 22.944879] sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 22.946734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.947886] sda: unknown partition table
[ 22.951811] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.211126] hda: QEMU HARDDISK, ATA DISK drive
[ 23.883187] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 23.883289] hda: MWDMA2 mode selected
[ 23.884023] Probing IDE interface ide1...
[ 24.283042] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 24.955145] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 24.955199] hdc: MWDMA2 mode selected
[ 24.955978] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.956812] isa bounce pool size: 16 pages
[ 24.957471] ide1 at 0x170-0x177,0x376 on irq 15
[ 24.974924] libata version 3.00 loaded.
[ 24.992633] ide-gd driver 1.18
[ 24.993261] hda: max request size: 512KiB
[ 24.993874] hda: 16384000 sectors (8388 MB) w/256KiB Cache, CHS=16253/255/63
[ 25.000639] ide-cd driver 5.00
[ 25.007111] hda: cache flushes supported
[ 25.007753] hda: hda1 hda2 < hda5 >
[ 25.010488] ide-cd: hdc: ATAPI 4X CD-ROM drive, 512kB Cache
[ 25.011858] Uniform CD-ROM driver Revision: 3.20
[ 25.110990] PM: Starting manual resume from disk
[ 25.129340] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 25.130052] EXT3-fs: write access will be enabled during recovery.
[ 26.128769] kjournald starting. Commit interval 5 seconds
[ 26.129481] EXT3-fs: recovery complete.
[ 26.130963] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.335166] udevd version 125 started
[ 26.631975] input: Power Button (FF) as /class/input/input1
[ 26.666993] ACPI: Power Button (FF) [PWRF]
[ 26.681253] parport_pc 00:05: reported by Plug and Play ACPI
[ 26.681824] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 26.723397] input: PC Speaker as /class/input/input2
[ 26.724903] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 26.949233] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 58.566336] Adding 393552k swap on /dev/hda5. Priority:-1 extents:1 across:393552k
[ 58.594239] EXT3 FS on hda1, internal journal
[ 59.613114] loop: module loaded
[ 60.681886] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 63.746408] NET: Registered protocol family 10
[ 63.748013] lo: Disabled Privacy Extensions
[ 73.968880] eth0: no IPv6 routers present
[ 233.617434] ADDRCONF(NETDEV_UP): eth1_rename: link is not ready
[ 236.587594] e1000e: eth1_rename NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 236.595715] ADDRCONF(NETDEV_CHANGE): eth1_rename: link becomes ready
[ 243.146435] TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v3.0.0 on Linux/x86_64 on 2.6.29.2
[ 243.147955] TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v1.0.0 on Linux/x86_64 on 2.6.29.2
[ 243.149107] SE_PC[0] - Registered Plugin Class: TRANSPORT
[ 243.149830] PLUGIN_TRANSPORT[1] - pscsi registered
[ 243.150492] PLUGIN_TRANSPORT[2] - stgt registered
[ 243.151183] CORE_STGT[0]: Bus Initalization complete
[ 243.151838] PLUGIN_TRANSPORT[4] - iblock registered
[ 243.152483] PLUGIN_TRANSPORT[5] - rd_dr registered
[ 243.153126] PLUGIN_TRANSPORT[6] - rd_mcp registered
[ 243.155097] PLUGIN_TRANSPORT[7] - fileio registered
[ 243.155743] SE_PC[1] - Registered Plugin Class: OBJ
[ 243.156372] PLUGIN_OBJ[1] - dev registered
[ 243.160265] Target_Core_ConfigFS: Located se_plugin: ffff88007c4318e0 plugin_name: iblock hba_type: 4 plugin_dep_id: 0
[ 243.161454] CORE_HBA[0] - Linux-iSCSI.org iBlock HBA Driver 3.0 on Generic Target Core Stack v3.0
[ 243.162630] CORE_HBA[0] - Attached iBlock HBA: 0 to Generic Target Core TCQ Depth: 512
[ 243.163681] CORE_HBA[0] - Attached HBA to Generic Target Core
[ 243.164496] IBLOCK: Allocated ib_dev for ssd_test0
[ 243.165152] Target_Core_ConfigFS: Allocated se_subsystem_dev_t: ffff88007c022000 se_dev_su_ptr: ffff88007c444c00
[ 243.166753] Target_Core_ConfigFS: Set emulated VPD Unit Serial: a97e4ce21c0711de829b000c2943d57b
[ 243.167947] IBLOCK: Referencing Major: 8
[ 243.168541] IBLOCK: Referencing Minor: 0
[ 243.169225] IBLOCK: Claiming ffff88007c444c00 Major:Minor - 8:0
[ 243.170021] bio: create slab <bio-1> at 1
[ 243.170656] IBLOCK: Created bio_set() for major/minor: 8:0
[ 243.171325] iblock: Using SPC3_PERSISTENT_RESERVATIONS emulation
[ 243.172012] iblock: Enabling ALUA Emulation for SPC-3 device
[ 243.172696] iblock: Adding to default ALUA LU Group: core/alua/lu_gps/default_lu_gp
[ 243.173802] CORE_iBLOCK[0] - Activating Device with TCQ: 0 at Major: 8 Minor 0
[ 243.175345] Vendor: LIO-ORG Model: IBLOCK Revision: 3.0
[ 243.181019] Type: Direct-Access ANSI SCSI revision: 05
[ 243.182592] T10 VPD Unit Serial Number: a97e4ce21c0711de829b000c2943d57b
[ 243.183397] T10 VPD Page Length: 72
[ 243.183983] T10 VPD Identifer Length: 16
[ 243.184588] T10 VPD Identifier Association: addressed logical unit
[ 243.185286] T10 VPD Identifier Type: NAA
[ 243.186965] T10 VPD Binary Device Identifier: 36001405a97e4ce21c0711de829b000c2
[ 243.187993] T10 VPD Identifer Length: 48
[ 243.188602] T10 VPD Identifier Association: addressed logical unit
[ 243.189303] T10 VPD Identifier Type: T10 Vendor ID based
[ 243.190037] T10 VPD ASCII Device Identifier: LIO-ORG
[ 243.191029] Target_Core_ConfigFS: Registered se_dev->se_dev_ptr: ffff88007c5d1400
[ 243.193246] Target_Core_ConfigFS: Located se_plugin: ffff88007c431838 plugin_name: pscsi hba_type: 1 plugin_dep_id: 0
[ 243.194482] CORE_HBA[1] - Linux-iSCSI.org SCSI HBA Driver v3.0 on Generic Target Core Stack v3.0
[ 243.195580] CORE_HBA[1] - MPT SPI Host
[ 243.196170] CORE_HBA[1] - Attached SCSI HBA to Generic Target Core with TCQ Depth: 127 MaxSectors: 8192
[ 243.197292] CORE_HBA[1] - Attached HBA to Generic Target Core
[ 243.198125] PSCSI: Allocated pdv: ffff88007c42aa00 for sda
[ 243.198803] Target_Core_ConfigFS: Allocated se_subsystem_dev_t: ffff88007c582000 se_dev_su_ptr: ffff88007c42aa00
[ 243.201132] PSCSI: Allocated pdv: ffff88007d064140 for sdb
[ 243.201952] Target_Core_ConfigFS: Allocated se_subsystem_dev_t: ffff88007c1d9800 se_dev_su_ptr: ffff88007d064140
[ 243.203550] PSCSI[0]: Referencing SCSI Channel ID: 0
[ 243.204200] PSCSI[0]: Referencing SCSI Target ID: 1
[ 243.204841] PSCSI[0]: Referencing SCSI LUN ID: 0
[ 243.205550] Unable to locate 0:0:1:0
[ 243.208465] Target_Core_ConfigFS: Located se_plugin: ffff88007c431918 plugin_name: rd_dr hba_type: 5 plugin_dep_id: 0
[ 243.209674] CORE_HBA[2] - Linux-iSCSI.org Ramdisk HBA Driver v3.0 on Generic Target Core Stack v3.0
[ 243.210802] CORE_HBA[2] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
[ 243.211942] CORE_HBA[2] - Attached HBA to Generic Target Core
[ 243.212774] Target_Core_ConfigFS: Allocated se_subsystem_dev_t: ffff88007c59c800 se_dev_su_ptr: ffff88007c4374c0
[ 243.214315] RAMDISK: Referencing Page Count: 32768
[ 243.224608] CORE_RD[0] - Built Ramdisk Device ID: 0 space of 32768 pages in 17 tables
[ 243.225795] rd_dr: Using SPC3_PERSISTENT_RESERVATIONS emulation
[ 243.226490] rd_dr: Enabling ALUA Emulation for SPC-3 device
[ 243.227165] rd_dr: Adding to default ALUA LU Group: core/alua/lu_gps/default_lu_gp
[ 243.228212] CORE_RD[0] - Activating Device with TCQ: 0 at Ramdisk Device ID: 0
[ 243.229792] Vendor: LIO-ORG Model: RAMDISK-DR Revision: 3.0
[ 243.235413] Type: Direct-Access ANSI SCSI revision: 05
[ 243.236861] T10 VPD Unit Serial Number: 1234567890:2_0
[ 243.237599] T10 VPD Page Length: 38
[ 243.238220] T10 VPD Identifer Length: 34
[ 243.238860] T10 VPD Identifier Association: addressed logical unit
[ 243.239540] T10 VPD Identifier Type: T10 Vendor ID based
[ 243.240190] T10 VPD ASCII Device Identifier: LIO-ORG
[ 243.241083] CORE_RD[0] - Added LIO DIRECT Ramdisk Device ID: 0 of 32768 pages in 17 tables, 134217728 total bytes
[ 243.242336] Target_Core_ConfigFS: Registered se_dev->se_dev_ptr: ffff88007c5d1000
[ 243.244650] Target_Core_ConfigFS: Located se_plugin: ffff88007c431918 plugin_name: rd_dr hba_type: 5 plugin_dep_id: 1
[ 243.245895] CORE_HBA[3] - Linux-iSCSI.org Ramdisk HBA Driver v3.0 on Generic Target Core Stack v3.0
[ 243.247006] CORE_HBA[3] - Attached Ramdisk HBA: 1 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
[ 243.248131] CORE_HBA[3] - Attached HBA to Generic Target Core
[ 243.248838] Target_Core_ConfigFS: Allocated se_subsystem_dev_t: ffff88007c18c000 se_dev_su_ptr: ffff88007c973940
[ 243.252447] RAMDISK: Referencing Page Count: 32768
[ 243.262801] CORE_RD[1] - Built Ramdisk Device ID: 0 space of 32768 pages in 17 tables
[ 243.263870] rd_dr: Using SPC3_PERSISTENT_RESERVATIONS emulation
[ 243.264555] rd_dr: Enabling ALUA Emulation for SPC-3 device
[ 243.265231] rd_dr: Adding to default ALUA LU Group: core/alua/lu_gps/default_lu_gp
[ 243.266342] CORE_RD[1] - Activating Device with TCQ: 0 at Ramdisk Device ID: 0
[ 243.267625] Vendor: LIO-ORG Model: RAMDISK-DR Revision: 3.0
[ 243.273342] Type: Direct-Access ANSI SCSI revision: 05
[ 243.274807] T10 VPD Unit Serial Number: 1234567890:3_0
[ 243.275527] T10 VPD Page Length: 38
[ 243.276125] T10 VPD Identifer Length: 34
[ 243.276734] T10 VPD Identifier Association: addressed logical unit
[ 243.277439] T10 VPD Identifier Type: T10 Vendor ID based
[ 243.278173] T10 VPD ASCII Device Identifier: LIO-ORG
[ 243.278891] CORE_RD[1] - Added LIO DIRECT Ramdisk Device ID: 0 of 32768 pages in 17 tables, 134217728 total bytes
[ 243.280067] Target_Core_ConfigFS: Registered se_dev->se_dev_ptr: ffff880037943400
[ 243.282480] Target_Core_ConfigFS: Located se_plugin: ffff88007c431988 plugin_name: fileio hba_type: 7 plugin_dep_id: 0
[ 243.320107] CORE_HBA[4] - Linux-iSCSI.org FILEIO HBA Driver 3.0 on Generic Target Core Stack v3.0
[ 243.321211] CORE_HBA[4] - Attached FILEIO HBA: 0 to Generic Target Core with TCQ Depth: 256 MaxSectors: 1024
[ 243.322383] CORE_HBA[4] - Attached HBA to Generic Target Core
[ 243.323284] FILEIO: Allocated fd_dev for ffff88007bd61ee0
[ 243.323964] Target_Core_ConfigFS: Allocated se_subsystem_dev_t: ffff88007d1b6000 se_dev_su_ptr: ffff88007c444000
[ 243.325456] Target_Core_ConfigFS: Set emulated VPD Unit Serial: 66e418b4e9ab11dd8f51000c2943d57b
[ 243.340857] FILEIO: Referencing Path: /tmp/fileio
[ 243.341504] FILEIO: Referencing Size: 134217728 bytes
[ 243.342298] fileio: Using SPC3_PERSISTENT_RESERVATIONS emulation
[ 243.342998] fileio: Enabling ALUA Emulation for SPC-3 device
[ 243.343668] fileio: Adding to default ALUA LU Group: core/alua/lu_gps/default_lu_gp
[ 243.344706] CORE_FILE[0] - Activating Device with TCQ: 0 at FILEIO Device ID: 0
[ 243.346260] Vendor: LIO-ORG Model: FILEIO Revision: 3.0
[ 243.351966] Type: Direct-Access ANSI SCSI revision: 05
[ 243.353392] T10 VPD Unit Serial Number: 66e418b4e9ab11dd8f51000c2943d57b
[ 243.354363] T10 VPD Page Length: 72
[ 243.354961] T10 VPD Identifer Length: 16
[ 243.355569] T10 VPD Identifier Association: addressed logical unit
[ 243.356304] T10 VPD Identifier Type: NAA
[ 243.356904] T10 VPD Binary Device Identifier: 3600140566e418b4e9ab11dd8f51000c2
[ 243.358048] T10 VPD Identifer Length: 48
[ 243.358649] T10 VPD Identifier Association: addressed logical unit
[ 243.359351] T10 VPD Identifier Type: T10 Vendor ID based
[ 243.360007] T10 VPD ASCII Device Identifier: LIO-ORG
[ 243.360730] CORE_FILE[0] - Added LIO FILEIO Device ID: 0 at /tmp/fileio, 134217728 total bytes
[ 243.361913] Target_Core_ConfigFS: Registered se_dev->se_dev_ptr: ffff880037943c00
[ 243.364168] Target_Core_ConfigFS: REGISTER -> group: ffffffffa02a0180 name: iscsi
[ 243.446323] Linux-iSCSI.org iSCSI Target Core Stack v3.0.0 on Linux/x86_64 on 2.6.29.2
[ 243.447405] <<<<<<<<<<<<<<<<<<<<<< BEGIN FABRIC API >>>>>>>>>>>>>>>>>>>>>>
[ 243.448132] Initialized struct target_fabric_configfs: ffff88006b554000 for iscsi
[ 243.449150] <<<<<<<<<<<<<<<<<<<<<< END FABRIC API >>>>>>>>>>>>>>>>>>>>>>
[ 243.449919] LIO_TARGET[0] - Set fabric -> lio_target_fabric_configfs
[ 243.451519] iscsi_allocate_thread_sets:195: ***OPS*** Spawned 4 thread set(s) (8 total threads).
[ 243.452909] TARGET_CORE[iSCSI]: Allocated Discovery se_portal_group_t for endpoint: None, Portal Tag: 0
[ 243.454075] CORE[0] - Allocated Discovery TPG
[ 243.454698] Loading Complete.
[ 243.455569] Target_Core_ConfigFS: REGISTER -> Located fabric: iscsi
[ 243.456279] Target_Core_ConfigFS: REGISTER -> ffffffffa02ddbb0
[ 243.456959] Target_Core_ConfigFS: REGISTER -> Allocated Fabric: iscsi
[ 243.457695] Target_Core_ConfigFS: REGISTER -> Set tf->tf_fabric for iscsi
[ 243.458610] lio_target_call_coreaddtiqn(): name: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 243.459839] CORE[0] - Added iSCSI Target IQN: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 243.461031] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 243.462213] LIO_Target_ConfigFS: REGISTER -> Allocated Node: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 243.463621] lio_target_tiqn_addtpg() called: name tpgt_1
[ 243.464283] lio_target_tiqn_addtpg() parent name: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 243.465439] lio_target_tiqn_addtpg() Using TPGT: 1
[ 243.466206] TARGET_CORE[iSCSI]: Allocated Normal se_portal_group_t for endpoint: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6, Portal Tag: 1
[ 243.467824] CORE[iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6]_TPG[1] - Added iSCSI Target Portal Group
[ 243.469018] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 243.536626] LIO_Target_ConfigFS: REGISTER -> Allocated TPG: tpgt_1
[ 243.537704] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6 TPGT: 1 PORTAL: 192.168.0.117:3260
[ 243.539129] CORE[0] - Added Network Portal: 192.168.0.117:3260 on TCP on network device: None
[ 243.540238] CORE[iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6] - Added Network Portal: 192.168.0.117:3260,1 on TCP on network device: None
[ 243.541925] CORE[iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6]_TPG[1] - Incremented np_exports to 1
[ 243.543104] LIO_Target_ConfigFS: addnptotpg done!
[ 243.649897] SCTP: Hash tables configured (established 65536 bind 65536)
[ 243.704216] CORE[0] - Added Network Portal: 192.168.0.117:3260 on SCTP on network device: None
[ 243.733493] CORE[iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6] - Added Network Portal: 192.168.0.117:3260,1 on SCTP on network device: None
[ 243.735142] CORE[iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6]_TPG[1] - Incremented np_exports to 1
[ 243.737456] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6 TPGT: 1 LUN: 0
[ 243.739831] rd_dr/iSCSI: Adding to default ALUA Target Port Group: core/alua/tg_pt_gps/default_tg_pt_gp
[ 243.740953] iSCSI_TPG[1]_LUN[0] - Activated iSCSI Logical Unit from CORE HBA: 2
[ 243.742029] LIO_Target_ConfigFS: Created Port Symlink ramdisk -> lun_0
[ 243.744038] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6 TPGT: 1 LUN: 1
[ 243.746304] rd_dr/iSCSI: Adding to default ALUA Target Port Group: core/alua/tg_pt_gps/default_tg_pt_gp
[ 243.747436] iSCSI_TPG[1]_LUN[1] - Activated iSCSI Logical Unit from CORE HBA: 3
[ 243.748468] LIO_Target_ConfigFS: Created Port Symlink ramdisk -> lun_1
[ 243.750509] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6 TPGT: 1 LUN: 2
[ 243.752754] fileio/iSCSI: Adding to default ALUA Target Port Group: core/alua/tg_pt_gps/default_tg_pt_gp
[ 243.753924] iSCSI_TPG[1]_LUN[2] - Activated iSCSI Logical Unit from CORE HBA: 4
[ 243.754957] LIO_Target_ConfigFS: Created Port Symlink fileio -> lun_2
[ 243.757089] LIO_Target_ConfigFS: REGISTER -> iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6 TPGT: 1 LUN: 3
[ 243.759370] iblock/iSCSI: Adding to default ALUA Target Port Group: core/alua/tg_pt_gps/default_tg_pt_gp
[ 243.760507] iSCSI_TPG[1]_LUN[3] - Activated iSCSI Logical Unit from CORE HBA: 0
[ 243.761525] LIO_Target_ConfigFS: Created Port Symlink ssd_test0 -> lun_3
[ 243.762761] Disabling iSCSI Authentication Methods for TPG: 1.
[ 243.763566] iSCSI_TPG[1] - Generate Initiator Portal Group ACLs: Enabled
[ 243.764414] iSCSI_TPG[1] - Demo Mode Write Protect bit: OFF
[ 243.765196] iSCSI_TPG[1] - Set Default CmdSN TCQ Depth to 4
[ 243.832368] iSCSI_TPG[1] - Enabled iSCSI Target Portal Group
[ 244.173472] Received iSCSI login request from 192.168.0.116 on TCP Network Portal 192.168.0.117:3260
[ 244.174664] Located Storage Object: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 244.175776] Located Portal Group Object: 1
[ 244.176405] TARGET_CORE[iSCSI]->TPG[1]_LUN[0] - Adding READ-WRITE access for LUN in Demo Mode
[ 244.177423] TARGET_CORE[iSCSI]->TPG[1]_LUN[1] - Adding READ-WRITE access for LUN in Demo Mode
[ 244.178656] TARGET_CORE[iSCSI]->TPG[1]_LUN[2] - Adding READ-WRITE access for LUN in Demo Mode
[ 244.179756] TARGET_CORE[iSCSI]->TPG[1]_LUN[3] - Adding READ-WRITE access for LUN in Demo Mode
[ 244.180854] iSCSI_TPG[1] - Added DYNAMIC ACL with TCQ Depth: 4 for iSCSI Initiator Node: iqn.1993-08.org.debian:01.2fed72c26a4c
[ 244.182213] ------------------------------------------------------------------
[ 244.183240] HeaderDigest: None
[ 244.183860] DataDigest: None
[ 244.184479] MaxRecvDataSegmentLength: 131072
[ 244.185099] IFMarker: No
[ 244.185779] OFMarker: No
[ 244.186394] ------------------------------------------------------------------
[ 244.187422] ------------------------------------------------------------------
[ 244.188435] MaxConnections: 1
[ 244.189056] TargetName: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 244.191890] InitiatorName: iqn.1993-08.org.debian:01.2fed72c26a4c
[ 244.192934] TargetAlias: LIO Target
[ 244.193622] InitiatorAlias: subjekt
[ 244.194272] TargetPortalGroupTag: 1
[ 244.194878] InitialR2T: Yes
[ 244.195485] ImmediateData: Yes
[ 244.196107] MaxBurstLength: 262144
[ 244.196741] FirstBurstLength: 65536
[ 244.197356] DefaultTime2Wait: 2
[ 244.198038] DefaultTime2Retain: 0
[ 244.198648] MaxOutstandingR2T: 1
[ 244.199266] DataPDUInOrder: Yes
[ 244.199883] DataSequenceInOrder: Yes
[ 244.200499] ErrorRecoveryLevel: 0
[ 244.201115] SessionType: Normal
[ 244.201812] ------------------------------------------------------------------
[ 244.202838] TARGET_CORE[iSCSI]: Registered fabric_sess_ptr: ffff88006b597e00
[ 244.203564] iSCSI Login successful on CID: 0 from 192.168.0.116 to 192.168.0.117:3260,1
[ 244.204621] Incremented iSCSI Connection count to 1 from node: iqn.1993-08.org.debian:01.2fed72c26a4c
[ 244.205800] Established iSCSI session from node: iqn.1993-08.org.debian:01.2fed72c26a4c
[ 244.238865] Incremented number of active iSCSI sessions to 1 on iSCSI Target Portal Group: 1
[ 247.041588] eth1_rename: no IPv6 routers present
[ 248.739907] Received iSCSI login request from 192.168.0.111 on TCP Network Portal 192.168.0.117:3260
[ 248.742799] Located Storage Object: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 248.743981] Located Portal Group Object: 1
[ 248.744635] TARGET_CORE[iSCSI]->TPG[1]_LUN[0] - Adding READ-WRITE access for LUN in Demo Mode
[ 248.745818] TARGET_CORE[iSCSI]->TPG[1]_LUN[1] - Adding READ-WRITE access for LUN in Demo Mode
[ 248.746927] TARGET_CORE[iSCSI]->TPG[1]_LUN[2] - Adding READ-WRITE access for LUN in Demo Mode
[ 248.748017] TARGET_CORE[iSCSI]->TPG[1]_LUN[3] - Adding READ-WRITE access for LUN in Demo Mode
[ 248.749122] iSCSI_TPG[1] - Added DYNAMIC ACL with TCQ Depth: 4 for iSCSI Initiator Node: iqn.1993-08.org.debian:01:2dadf92d0ef
[ 248.750565] ------------------------------------------------------------------
[ 248.751597] HeaderDigest: None
[ 248.752230] DataDigest: None
[ 248.752861] MaxRecvDataSegmentLength: 131072
[ 248.753543] IFMarker: No
[ 248.754171] OFMarker: No
[ 248.754785] ------------------------------------------------------------------
[ 248.755822] ------------------------------------------------------------------
[ 248.756853] MaxConnections: 1
[ 248.757510] TargetName: iqn.2003-01.org.linux-iscsi.lenny64guest1.x86_64:sn.35c620374de6
[ 248.758690] InitiatorName: iqn.1993-08.org.debian:01:2dadf92d0ef
[ 248.759742] TargetAlias: LIO Target
[ 248.760397] InitiatorAlias: ubuntu
[ 248.761034] TargetPortalGroupTag: 1
[ 248.761731] InitialR2T: Yes
[ 248.762352] ImmediateData: Yes
[ 248.762972] MaxBurstLength: 262144
[ 248.763604] FirstBurstLength: 65536
[ 248.764233] DefaultTime2Wait: 2
[ 248.764844] DefaultTime2Retain: 0
[ 248.765453] MaxOutstandingR2T: 1
[ 248.767078] DataPDUInOrder: Yes
[ 248.767698] DataSequenceInOrder: Yes
[ 248.768319] ErrorRecoveryLevel: 0
[ 248.768926] SessionType: Normal
[ 248.769681] ------------------------------------------------------------------
[ 248.770703] TARGET_CORE[iSCSI]: Registered fabric_sess_ptr: ffff88006b597000
[ 248.771412] iSCSI Login successful on CID: 0 from 192.168.0.111 to 192.168.0.117:3260,1
[ 248.772470] Incremented iSCSI Connection count to 1 from node: iqn.1993-08.org.debian:01:2dadf92d0ef
[ 248.773644] Established iSCSI session from node: iqn.1993-08.org.debian:01:2dadf92d0ef
[ 248.774694] Incremented number of active iSCSI sessions to 2 on iSCSI Target Portal Group: 1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists