| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 26 May 2014 15:03:27 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: Mika Westerberg <mika.westerberg@...ux.intel.com>,
Jin Yao <yao.jin@...ux.intel.com>,
Li Aubrey <aubrey.li@...ux.intel.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCHv3 2/4] ACPI / LPSS: custom power domain for LPSS
On Friday, May 23, 2014 04:15:09 PM Heikki Krogerus wrote:
> A power domain where we save the context of the additional
> LPSS registers. We need to do this or all LPSS devices are
> left in reset state when resuming from D3 on some Baytrails.
> The devices with the fractional clock divider also have
> zeros for N and M values after resuming unless they are
> reset.
>
> Li Aubrey found the root cause for the issue. The idea of
> using power domain for LPSS came from Mika Westerberg.
>
> Reported-by: Jin Yao <yao.jin@...ux.intel.com>
> Suggested-by: Li Aubrey <aubrey.li@...ux.intel.com>
> Tested-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Queued up for 3.16, but I needed to rebase it to take some other changes
into account. Can you please have a look and the bleeding-edge branch in
my tree and see if everything looks good in there?
> ---
> drivers/acpi/acpi_lpss.c | 152 ++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 145 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
> index 69e29f4..7fe8b6d 100644
> --- a/drivers/acpi/acpi_lpss.c
> +++ b/drivers/acpi/acpi_lpss.c
> @@ -19,6 +19,7 @@
> #include <linux/platform_device.h>
> #include <linux/platform_data/clk-lpss.h>
> #include <linux/pm_runtime.h>
> +#include <linux/delay.h>
>
> #include "internal.h"
>
> @@ -43,6 +44,8 @@ ACPI_MODULE_NAME("acpi_lpss");
> #define LPSS_TX_INT 0x20
> #define LPSS_TX_INT_MASK BIT(1)
>
> +#define LPSS_PRV_REG_COUNT 9
> +
> struct lpss_shared_clock {
> const char *name;
> unsigned long rate;
> @@ -58,6 +61,7 @@ struct lpss_device_desc {
> unsigned int prv_offset;
> size_t prv_size_override;
> bool clk_gate;
> + bool save_ctx;
> struct lpss_shared_clock *shared_clock;
> void (*setup)(struct lpss_private_data *pdata);
> };
> @@ -72,6 +76,7 @@ struct lpss_private_data {
> resource_size_t mmio_size;
> struct clk *clk;
> const struct lpss_device_desc *dev_desc;
> + u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
> };
>
> static void lpss_uart_setup(struct lpss_private_data *pdata)
> @@ -116,6 +121,7 @@ static struct lpss_shared_clock pwm_clock = {
>
> static struct lpss_device_desc byt_pwm_dev_desc = {
> .clk_required = true,
> + .save_ctx = true,
> .shared_clock = &pwm_clock,
> };
>
> @@ -128,6 +134,7 @@ static struct lpss_device_desc byt_uart_dev_desc = {
> .clk_required = true,
> .prv_offset = 0x800,
> .clk_gate = true,
> + .save_ctx = true,
> .shared_clock = &uart_clock,
> .setup = lpss_uart_setup,
> };
> @@ -141,6 +148,7 @@ static struct lpss_device_desc byt_spi_dev_desc = {
> .clk_required = true,
> .prv_offset = 0x400,
> .clk_gate = true,
> + .save_ctx = true,
> .shared_clock = &spi_clock,
> };
>
> @@ -156,6 +164,7 @@ static struct lpss_shared_clock i2c_clock = {
> static struct lpss_device_desc byt_i2c_dev_desc = {
> .clk_required = true,
> .prv_offset = 0x800,
> + .save_ctx = true,
> .shared_clock = &i2c_clock,
> };
>
> @@ -449,6 +458,121 @@ static void acpi_lpss_set_ltr(struct device *dev, s32 val)
> }
> }
>
> +#ifdef CONFIG_PM
> +/**
> + * acpi_lpss_save_ctx() - Save the private registers of LPSS device
> + * @dev: LPSS device
> + *
> + * Most LPSS devices have private registers which may loose their context when
> + * the device is powered down. acpi_lpss_save_ctx() saves those registers into
> + * prv_reg_ctx array.
> + */
> +static void acpi_lpss_save_ctx(struct device *dev)
> +{
> + struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
> + unsigned int i;
> +
> + for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
> + pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, i * sizeof(u32));
> + dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
> + pdata->prv_reg_ctx[i], i * sizeof(u32));
> + }
> +}
> +
> +/**
> + * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
> + * @dev: LPSS device
> + *
> + * Restores the registers that were previously stored with acpi_lpss_save_ctx().
> + */
> +static void acpi_lpss_restore_ctx(struct device *dev)
> +{
> + struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
> + unsigned int i;
> +
> + /*
> + * The following delay is needed or the subsequent write operations may
> + * fail. The LPSS devices are actually PCI devices and the PCI spec
> + * expects 10ms delay before the device can be accessed after D3 to D0
> + * transition.
> + */
> + msleep(10);
> +
> + for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
> + __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, i * sizeof(u32));
> + dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
> + pdata->prv_reg_ctx[i], i * sizeof(u32));
> + }
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int acpi_lpss_suspend_late(struct device *dev)
> +{
> + int ret = pm_generic_suspend_late(dev);
> +
> + if (ret)
> + return ret;
> +
> + acpi_lpss_save_ctx(dev);
> + return acpi_dev_suspend_late(dev);
> +}
> +
> +static int acpi_lpss_restore_early(struct device *dev)
> +{
> + int ret = acpi_dev_resume_early(dev);
> +
> + if (ret)
> + return ret;
> +
> + acpi_lpss_restore_ctx(dev);
> + return pm_generic_resume_early(dev);
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM_RUNTIME
> +static int acpi_lpss_runtime_suspend(struct device *dev)
> +{
> + int ret = pm_generic_runtime_suspend(dev);
> +
> + if (ret)
> + return ret;
> +
> + acpi_lpss_save_ctx(dev);
> + return acpi_dev_runtime_suspend(dev);
> +}
> +
> +static int acpi_lpss_runtime_resume(struct device *dev)
> +{
> + int ret = acpi_dev_runtime_resume(dev);
> +
> + if (ret)
> + return ret;
> +
> + acpi_lpss_restore_ctx(dev);
> + return pm_generic_runtime_resume(dev);
> +}
> +#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
> +
> +static struct dev_pm_domain acpi_lpss_pm_domain = {
> + .ops = {
> +#ifdef CONFIG_PM_SLEEP
> + .suspend_late = acpi_lpss_suspend_late,
> + .restore_early = acpi_lpss_restore_early,
> + .prepare = acpi_subsys_prepare,
> + .suspend = acpi_subsys_suspend,
> + .resume_early = acpi_subsys_resume_early,
> + .freeze = acpi_subsys_freeze,
> + .poweroff = acpi_subsys_suspend,
> + .poweroff_late = acpi_subsys_suspend_late,
> +#endif
> +#ifdef CONFIG_PM_RUNTIME
> + .runtime_suspend = acpi_lpss_runtime_suspend,
> + .runtime_resume = acpi_lpss_runtime_resume,
> +#endif
> + },
> +};
> +
> static int acpi_lpss_platform_notify(struct notifier_block *nb,
> unsigned long action, void *data)
> {
> @@ -456,7 +580,6 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
> struct lpss_private_data *pdata;
> struct acpi_device *adev;
> const struct acpi_device_id *id;
> - int ret = 0;
>
> id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
> if (!id || !id->driver_data)
> @@ -466,7 +589,7 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
> return 0;
>
> pdata = acpi_driver_data(adev);
> - if (!pdata || !pdata->mmio_base || !pdata->dev_desc->ltr_required)
> + if (!pdata || !pdata->mmio_base)
> return 0;
>
> if (pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
> @@ -474,12 +597,27 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
> return 0;
> }
>
> - if (action == BUS_NOTIFY_ADD_DEVICE)
> - ret = sysfs_create_group(&pdev->dev.kobj, &lpss_attr_group);
> - else if (action == BUS_NOTIFY_DEL_DEVICE)
> - sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
> + switch (action) {
> + case BUS_NOTIFY_BOUND_DRIVER:
> + if (pdata->dev_desc->save_ctx)
> + pdev->dev.pm_domain = &acpi_lpss_pm_domain;
> + break;
> + case BUS_NOTIFY_UNBOUND_DRIVER:
> + if (pdata->dev_desc->save_ctx)
> + pdev->dev.pm_domain = NULL;
> + break;
> + case BUS_NOTIFY_ADD_DEVICE:
> + if (pdata->dev_desc->ltr_required)
> + return sysfs_create_group(&pdev->dev.kobj,
> + &lpss_attr_group);
> + case BUS_NOTIFY_DEL_DEVICE:
> + if (pdata->dev_desc->ltr_required)
> + sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
> + default:
> + break;
> + }
>
> - return ret;
> + return 0;
> }
>
> static struct notifier_block acpi_lpss_nb = {
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists